Hey Colin! I reached out to Swing King and they said the trailer tongue will slide in approximately 3-1/2" on either side on the #TD88FR. With an overall length of 18-1/4" you're adding about 11-1/4" to the tongue. I went ahead and…
Thanks for the picture Richard, I can tell by your picture you have a Model 6 surge actuator on your trailer which the #T4846500183 is the correct replacement for if you were wanting a channel style inner slide member replacement.
Hey Steven! As long as that is .25" thick steel there is no reason why you wouldn't be able to weld the Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue #FHDPW350300 onto your trailer. The instructions/requirements for the…
Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…
Hey Dale! From what we have found, the pins on the replacement inner members like #DX97FR won't line up correctly on the old TDE LP7000. Since they're no longer around, a complete replacement is the best option. I recommend using the Dexter…
Hey Conner, thanks for reaching out! I'm attaching a link to our returns policy for your reference. You aren't the only one in this situation where tire chains like the Titan Chain Snow Tire Chains #TC1530 are required for travel but may not…
Hello Jack, thanks for reaching out. The Yakima LowRider Kayak Trailer is a great option for carrying tow Old Town sportsman 106 kayaks. The crossbars are 78" long so you will have room to spare with the kayaks side by side. Also, the tires have…
Hey Joe, The Dexter Swing-Away Coupler #DX53CR is made out of a steel construction, not cast iron. So none of the item itself is a cast iron material. Are you specifically looking for one that is?
If your Military M1101 Trailer uses a Titan Model 10 Surge Brake Actuator the Replacement Bolt-On Inner Slide with Leveler Channel for Titan Model 10 Actuator #T4721700 will work perfectly to replace your pintle, but if you are wanting to go to…
The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91…
Hey Scotty, the tongue of the Yakima LowRider part #Y82QD does not have ability to fold or retract. BUT we do have the Malone MicroSportXT Trailer #MPG460XT that does have a retractable tongue. It also can carry boats up to 20 feet in length and has…
Since you mentioned wanting the most stability and not always being perfect when loading (understandably), I think the longer, 5 foot (60 inch) CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 is the best option as it will give you the most…
