Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.

Robert

Bloomington, IL


inno





Inno Reviews and Installation Videos


See all Inno videos >>

Expert Answers about Inno

  • How to Remove Brand Stickers from a Cargo Basket
  • The "Inno" logo that is placed on the front and rear of the Inno Shaper 80 Roof Cargo Basket part # INXA568 are stickers that are applied at the factory before they ship to our warehouse. I do have a simple way for you to remove them but we cannot exactly requestly to not have them put on. In order to remove the above stickers all you will need is a heat gun or blow dryer and bit of adhesive remover such as Goo Gone. To remove the stickers you will first want to heat them up with the...
    view full answer...

  • Custom Fit Kit for the Inno Dual Angle on a 2017 Mazda CX-5
  • To install the Inno Dual Angle, part # INUK729, you'll need fit kit part # INK497 to complete the installation.
    view full answer...

  • Fit of Inno Shaper80 Rooftop Cargo Basket INXA568 on Rhino-Rack RS 2500 Roof Rack
  • The Rhino-Rack RS 2500 aero roof racks that fit your 2016 Mazda CX-3, parts # RRRS652B in black and # RRRS652 in silver, use elliptical crossbars whose dimensions are 3-1/8-inches wide x 1-3/16-inches tall. The Inno Shaper80 Rooftop Cargo Basket # INXA568 is compatible with the T-slot channels in the Rhino-Rack crossbars. Just take a quick measurement of the spacing of your bars, from the center points of both the front and rear bars, to confirm they are at least 20-inches apart as...
    view full answer...

  • 2016 Honda Civic Coupe Roof Rack Recommendation
  • A two door vehicle is considered a coupe whereas a 4 door is a sedan. Since you have a 2 door vehicle that means you have a coupe which we do have roof rack fits for. The INNO Square Bar Roof rack part # INB137, # INSUT, and # INK683 is a confirmed fit for your vehicle and would work well.
    view full answer...

  • Clearance Between Vehicle Sunroof and Roof Rack Crossbars of Inno Square Bar Roof Rack
  • Roof rack makers generally do not recommend operating a vehicle's sunroof when an aftermarket roof rack is installed. Even if there is no clearance issue between the bottom of the crossbars and the top of the sunroof there would be a lot of noise from wind turbulence at the bars that would likely make you want to keep the sunroof closed anyway. Also note that any roof-rack-mount accessory item you might install on the crossbars - say a bike rack or cargo carrier - will use some type...
    view full answer...

  • Roof Rack Fishing Rod Holder Availability
  • I have a roof rack fishing pole rack I can recommend for your, but the part # INIF6 can only be used on the interior of a vehicle. Instead you would want the Rhino Rack part # RR572 which is a ski rack that can also be used to carry several fishing rods.
    view full answer...

  • Differences Between Inno Shadow 15 and Inno Wedge 660 Roof Cargo Boxes
  • The Inno Shadow 15 NBRA1170CA and Inno Wedge 660 # INBRM660BK are functionally almost exactly the same, as you noted; with a weight capacity of 110 lbs, 11 cubic feet of cargo space, dual side-opening lids and Memory Mount hardware. However, there are some slight differences which may lead someone to purchase one over the other, which I'll outline for you. - Crossbar Spread: Shadow 15 requires between 23-1/2" and 39" while the Wedge 660 requires between 24" and 39". - Exterior dimensions:...
    view full answer...

  • Flush Aero Bar Roof Rack Recommendation for 2017 Lincoln MKX with Naked Roof
  • For an aeroblade style roof rack confirmed as a fit for your 2017 Lincoln MKX with a naked roof the Inno roof rack of part numbers # INXB115-2, # INXS200, and # INK676 would be what you need. This is a flush bar style roof rack which means the crossbars do not extend past the feet at all so the bars match the width of your roof.
    view full answer...

  • Are INNO Square and Thule Square Crossbars the Same Dimensions
  • INNO square crossbars and Thule square crossbars are the same dimensions, 7/8 inch by 1-1/4 inch. The part # INTR would then be compatible with Thule crossbars. To complete the rack for your 2015 Jeep Grand Cherokee you would also need the # INTR132.
    view full answer...

  • Recommended Lightweight Bike Rack to Use on 2014 Toyota Camry
  • The bike rack that is the best combination of lightweight and easy to use which will work with the 1-1/4" Class II Draw-Tite # 36540 on your 2014 Toyota Camry is the Inno Aero Light QM # INH330. This is a 2-bike rack that weighs just 30 lbs and is a frame-mounted rack so it will work with your hybrid bike that has fenders. The Inno Aero Light # INH330 is also easy to install because it uses a locking hand knob to tighten the rack inside your hitch. The Aero Light can either fold up...
    view full answer...

  • Recommended Bike Rack Compatible With Sliding TracRac Ladder Rack
  • Since you have a TracRac System that slides for adjustable crossbar spread, I recommend the Inno Fork Lock Roof Bike Rack - Fork Mount - Channel Mounted - Aluminum # INXA391 which uses t-shaped bolts to secure the rack that will be compatible with your TracRac bars. You also may be interested in the SeaSucker Hogg - Bike Wheel Carrier - Anodized Aluminum # 298-BA1580. The TracRac bars are too thick for most carriers, and the t-bolts of most carriers are not compatible, but this carrier...
    view full answer...

  • Bike Rack that Keeps Bike Wheels On and Fits Factory Bed Rail System for 2017 Toyota Tacoma
  • Yes! For your 2017 Toyota Tacoma with the cargo management rails you can use the Inno Velo Gripper # INRT202. This version comes with hardware to mount in the factory rails and you will not have to remove the front wheel. The Gripper can hold the bike at the frame.
    view full answer...

  • Availability of 2-Bike Truck Bed Bike Rack for 2018 Ram 1500
  • We have a similar truck bed bike rack to the Inno Velo Gripper # INRT201 that does allow you to carry two bikes as the Topline 2 bike rack part # UG2500 which would work well and is a high quality rack, but the Inno you mentioned does not have an expansion rack you can put on it.
    view full answer...

  • Parts Needed to Install INNO Square Roof Rack on a 2014 Mazda CX-5
  • We have INNO roof racks that are a fit for your 2014 Mazda CX-5, but none of them use the foot kit part # INXR that you referenced. If you have a totally naked roof you would want the part numbers # INB127, # INSUT, and # INK758. Or, if you have a roof rack that has rails that run from front to back you would want the part numbers # INB127 and # INFR.
    view full answer...

  • Replacement Key Needed for Inno Roof Rack
  • As long as your cylinder has the code A76 on it then the Replacement Key for Inno Roof Racks, Bike Racks, and Cargo Boxes # INA76 that you referenced is compatible and will fit.
    view full answer...

  • Is Bike Rod of Inno Velo Gripper Bike Rack Adjustable
  • Yes, the arms you referred of the Inno Velo Gripper bike rack part # INRT201 are adjustable. In the instructions this is referred to as the bike rod and can move in and out to allow you to line the bike up as needed.
    view full answer...

  • Fitment and Compatibility of Inno Velo Gripper Bike Rack for Truck Beds with Bed Cap
  • Since not every bike has the same standard length or shape handlebars the best thing to do to see if it will clear your cap is to measure. The length of the adjustable rod to the cradle is 7-1/2 inches. The rotating rods also allow you to adjust the amount of space between your bike frame and the side of your truck bed. That way, you can position your bike close enough to the side of your truck bed to save space but not so close that your bike and truck bed make contact. Best thing...
    view full answer...

  • Roof Rack for a 2017 Fiat 500X with Sunroof
  • The Square Bar Inno Kit is a confirmed fit for your 2017 Fiat 500x with the sunroof. You'll want to verify your vehicle's roof capacity with your owner's manual or manufacturer prior to loading anything onto the roof bars. Sunroofs tend to have a lower overall capacity. This kit consists of: Inno Square Crossbars, 50 Inches, part # INB127 Inno Foot Pack for Square Bars, part # INSUT Inno Fit Kit for Fiat 500X, part # INK482
    view full answer...

  • Recommended Roof Rack For 2009 Hyundai Accent 3-Door Hatchback
  • The roof rack that we offer that is confirmed as a fit for your 2009 Accent 3-door is the Inno Roof Rack. Thule does not have a roof rack that is confirmed as a fit for your Accent. The Inno rack features 46 inch long square load bars, feet, short roof adapter kit, and the fit kit hooks. This roof rack crossbars measure 46 inches long, and are 7/8 inches wide and 1-1/4 inches tall. The roof rack has a weight capacity of 220 lbs, but you will want to check your owner's manual or with...
    view full answer...

  • Recommended Roof Rack for 2017 Fiat 500x with Sunroof
  • For your 2017 Fiat 500X, the roof rack I recommend for your vehicle is the Inno Aero Crossbars # INXB130-138, along with the Inno Through Feet # INXS250, and the Fit Kit # INK482. This combination will allow you to use your Thule accessories whether they are channel mounted or clamp on. This system comes with the integrated locking covers for increased security and has the aero bars for a quieter rack. This roof rack will give you a crossbar spread of 26 inches, so it will work with...
    view full answer...

  • Installation Method for Inno Square Bar Roof Rack on 2016 Lexus GX 460
  • If the flush roof side rails on your 2016 Lexus GX 460 do not have a fixed-point mounting system, but rather have tracks like those shown in the linked photo, then the rack crossbars' position will be adjustable. If you see one specific mounting point in the rails then this means the car is intended for a fixed-point rack installation. This Inno rack, composed of parts # INB127, # INTR and # INTR134, works for both roof configurations.
    view full answer...

  • Bed Rail Solution for a Roof Top Tent on a 1999 Dodge Ram 1500 Quad Cab
  • I have a solution for you, however there aren't any confirmed in the bed rail fits for the 1999 Dodge Ram 1500 Quad Cab that can support the weight of the tent plus occupants. The Inno Bed Rail rack, part # INRT101 is only rated for 190 pounds, so it would likely fail if you got into the tent while equipped. Instead, I recommend the Rola Haul-Your-Might ladder rack, part # 59742 for either bed length. This rack has a capacity of 400 pounds, and uses traditional shaped crossbars, giving...
    view full answer...

  • Are Inno Square Roof Rack Bars the Same Dimensions as Thule Crossbars
  • The Inno crossbars of the roof rack you mentioned part numbers # INB117 and # INFR match the same dimensions as Thule crossbars at 1-1/4 inches wide and 7/8 inches tall. This rack will work with your Thule roof bike racks that are designed to fit square crossbars.
    view full answer...

  • Inno Roof Rack Fit on 2016 Lexus GX 460
  • The Inno square bar roof rack for your 2016 Lexus GX 460 with flush-mounted roof siderails does consist of parts # INB127, # INTR and # INTR134 and it is a complete roof rack system. No other parts are needed to install it. The crossbar spacing for this system on your Lexus is adjustable and the maximum bar spacing is 49-inches between bar centers. You can check the spacing of the installation hardware on your Thule cargo box to confirm that it will be compatible with this bar spread....
    view full answer...

  • Will Inno Fishing Rod Holder # INIF9 Fit Inside 2017 Subaru Outback Wagon
  • The Inno Fishing Rod Holder # INIF9 referenced in your question is a nice, ceiling-mounted holder that will let you carry up to 2 fishing rods with reels attached or 3 rods without reels. When installing the holder, you will first need to remove the rear seat grab handle. You will simply use its mounting holes to install the rack. The aluminum carrier measures only 39-1/6 inches in length. As long as you are able to remove the grab handle in your Outback Wagon and you have the necessary...
    view full answer...

  • Recommendation to Install Crossbars on Utility Trailer for Kayak Carrier
  • I may have a solution for you, however the Inno Truck Bed Cargo Rack # INRT101-79 referenced in your question is designed specifically for certain model truck beds, so it might not be the best fit for your utility trailer. For your trailer, I recommend looking at the Malone Crossbar Conversion Kit # MPG475. This system is designed for utility trailers like yours to allow you to transport kayaks with your existing carriers. It includes two 78 inch load bars, 4 brackets and the mounting...
    view full answer...

  • Inno Low Profile Roof Rack for a 2015, 2016, or 2017 Subaru Legacy Sedan
  • Yes, you can use the Inno XS200 feet, # INXS200, on a 2015 to 2017 Subaru Legacy sedan. In addition to the feet you will also need the bars, # INXB115-2, and the custom fit kit, # INK439. I have linked a video showing the features of this style of Inno roof rack on a different vehicle.
    view full answer...

  • Will Inno Fairing Item # INA262 Fit The Factory Aero Crossbars On A 2016 Toyota Prius
  • Depending on your crossbars, the Inno Fairing, Item # INA262, will fit. The Inno fairing works with factory aero crossbars and fits crossbars with these maximum dimensions: 1 inch tall x 3-1/2 inch wide x 1-1/8 inch diameter. The minimum spacing between crossbar feet is 35-1/2 inches. If your crossbars are too tall, you will also need the Inno Fairings Adapter Kit, Item # INISF717. The Inno fairing easily clamps on to most crossbars. Before purchasing, measure your crossbars and...
    view full answer...

  • Difference Between Inno Surfboard/Kayak Carriers INA744 vs INA446
  • The two Inno racks you referenced are pretty similar but the difference is that the part # INA446 is geared more for carrying a kayak or 2 boards whereas the # INA744 is geared more for carrying boards. It can carry up to 3 short boards or 2 long boards. Basically the kayak geared rack has higher brackets that lock down for securing a tall kayak and the board orientated carrier has lower brackets for the straps.
    view full answer...

  • What Size Crossbar Will the Inno Roof Rack Fairings Fit
  • You will need to measure the crossbars on your 2015 Jeep Grand Cherokee. The Inno Fairing part # INA262 can fit crossbars that are up to 3-1/2 inches wide and between 5/8 inch and 1 inch tall this would fit.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.