Hello Erald, Thanks for writing in Yes, you are on the right track with the Roadmaster Dual Hitch Receiver Adapter #RM83SR and the Flint Hill Goods Cargo Carrier #FHG87ZR. The #RM83SR is made for exactly what you are wanting to do. You can put your…
Carson, totally fair concern, but you’re actually in better shape with this rack than most platform-style carriers. The Benton Modular Cargo Carrier #B42FR sits high on the hitch arm, and nothing hangs below your receiver. The shank will stick out…
The cargo bag I highly recommend for your Pro Series Cargo Carrier #63153 is the etrailer Cargo Bag #988501. It has 20 cubic feet of storage, is waterproof with PVC coated nylon, and has six tie-down straps that will secure it to your Pro Series…
Terry, you've picked out a really nice combination for a family road trip. The Benton MoveHitch part #B86VR is lightweight at just 45 pounds, so it's much easier to install than many steel cargo carriers. The Benton HotMesh Cargo Net part…
Hello Todd, great question. The Yakima EXO Swing Away and Gear Locker #Y62VR is going to allow you to open the rear doors on your 2025 Sprinter 3500XD RV at around 90 degrees. Then with the box removed you may face a clearance issue with your…
Hey Michael, welcome back! The Benton MoveHitch 60x24 Cargo Carrier for 2" Hitches #B38VR you looked at does have a tilt away feature. This can help with loading/unloading, and also help clear a rear hatch. The tilt mechanism is one of the…
I do have a solution for you, but the 24x60 etrailer Cargo Carrier #e98874 is not designed to be used on the back of an RV. Generally speaking, folding carriers are not ideal because they do not stand up too well to the extra stress exerted by the…
Hey Garret, we actually have an LED light kit for the etrailer cargo carrier part #e98874 with the part #e67RV which puts a couple smaller light bars at the rear of the carrier like you can see in the attached picture. These will have the running…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey David! The Curt Cargo Bag #C18211 can be used with the 22x60 Flint Hill Goods Cargo Carrier #FHG49ZR. However, the bag itself is 22" wide, while the cargo carrier has an inside width of 20-1/2". You will be able to sit it down inside…
Hey Matt, so the etrailer enclosed carrier part #e54VV does tilt back with the hinge that is built into the shank of the carrier. Jeep Wranglers have rear doors that swing out so I would not anticipate this being able to tilt enough to fully allow…
Got you covered Pete, thanks for reaching out! For your 26 Chevy 2500HD, the Curt EZr Double Lock Underbed Gooseneck Hitch #C65HR has the best overall value between cost effectiveness and towing capabilities. The Curt EZr is rated for 30k lbs, so it…
Heading out with extra gear is simple with Inno hitch cargo carriers. Options include easy-to-assemble bases that sit tight in the hitch and are straightforward to mount and store. Depending on the model, you can get a built-in hitch lock or swap the cargo box between a hitch base and a roof-mount base, letting you plan around vehicle clearances and license plate visibility.
Yes, Inno offers versions for a hitch and versions for crossbars. The cargo boxes can be swapped between bases, but you would need two separate bases. The roof rack mounts are compatible with square crossbars and ones with accessory slots in the top of the crossbar.
Some Inno setups include a built-in hitch lock using a lockable knob. Verify if your carrier has this feature. Also check whether the cargo box and the hitch lock use the same key, since some are keyed differently and come with limited keys.
They can do a good job keeping out water and dust. Tight tolerances between the top and bottom help reduce intrusion during long trips in snow, rain, and heat. If you want a heavier-duty feel, check the box thickness since some find the case flimsier than expected. Look for anti-rattle features to help it sit tight in the hitch.
Confirm you have the hitch size the base requires, as some Inno bases are for 2" hitches. Check if the carrier blocks your license plate or rear camera; on some vehicles the plate can be hidden. If you need extra clearance, look for a base with a rise in the shank to improve departure angle.
Hitch Cargo Carrier Parts or Accessories
Filters
