fall hauling headquarters

Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

These arrived yesterday and are EXACTLY what I was looking for. Thanks for the excellent service!

Bill

Boxborough, MA


Lets Go Aero





Lets Go Aero Reviews and Installation Videos


See all Lets Go Aero videos >>

Expert Answers about Lets Go Aero

  • Bike Rack Cover Recommendation for Use with a Thule Doubletrack Platform Rack
  • Your best option for a bike cover would be the Bike Cover # B01571. This cover is not restricted to only RV applications. It has clear panels to allow taillight visibility. This cover also has air vents to prevent moisture buildup and wind lofting.
    view full answer...

  • Options on How to Fix a Loose 2 Inch Ball Mount
  • I have a couple different options on ways to fix a loose ball mount. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle. The Roadmaster Quiet Hitch, # RM-061, helps eliminate rattle and sway within your hitch receiver.
    view full answer...

  • Recommended Bike Carrier To Use Between RV And Towed Vehicle
  • In order to be able to carry bikes between your towed vehicle and the RV you will first need a dual receiver for your trailer hitch. I recommend the Curt Dual 2 inch Receiver Tube Adapter, part # D-192. the bottom receiver is used for the tow bar and the upper receiver has a 2 inch receiver for the bike carrier. Bike carriers need to be RV rated because they are built to take on the added stress at the rear of the RV or motorhome. The carrier I recommend is the Swagman Original,...
    view full answer...

  • Eliminating Wobble and Movement in a Yakima Trailer Hitch Mount Bike Rack
  • You can use an anti-rattle device such as # SHP2082 as long as the shank on the bike rack is hollow. If it is not hollow then use anti-rattle device # 93347. I have included a link to a video review of device # 93347 for you. It is also possible that inside the shank of your Yakima bike rack there is a weld nut that accepts a threaded hitch pin. To determine which pin will fit I would need to know the model of the bike rack.
    view full answer...

  • Best Anti-Rattle Device Recommendation for a 2 inch Ball Mount
  • The most popular anti-rattle device we carry that is designed for use with a 2 inch hitch would be the part # 63232. This will install in the hollow shank of a 2 inch ball mount and will secure it to the side of your hitch so that it stop rattling. It also doubles as a hitch lock. I attached an install video for you to check out as well.
    view full answer...

  • Tent Solution for Expanding Space in Enclosed Trailer
  • There are several sizes and designs of the Let's Go Aero ArcHaus tent shelters like the # SAR024 that you referenced. Some of these tents, such as # SAR598, are intended for installation at the back of a vehicle while others like the ArcHaus Tent Shelter you referenced, part # SAR024, are made for free-standing use. The ArcHaus tents have a height of 6-1/2-feet, only a little bit short of your enclosed trailer's 7-foot height. I checked with my contact at Let's Go Aero for any other...
    view full answer...

  • How to Reduce Excessive Trailer Noise (Banging/Rattling)
  • It sounds to me like the hinge pin on your trailer's tailgate is worn and is causing excessive movement which will result in a noisy ride. In order to secure the tailgate to the trailer while driving down the road I recommend using a set of ratchet straps like the Erickson Re-Tractable Ratchet Straps part # EM34415. In order to reduce movement and rattling from the ball mount inside the receiver tube you will want to use an anti-rattle hitch pin such as the Anti-Rattle Trailer Hitch...
    view full answer...

  • Bike Rack Cover Recommendation for a Thule T2 for Fat Bikes
  • The bike cover part # B01571 would work well as a bike cover for your Thule T2 for Fatbikes part # TH9045. Normally we only recommend using bike covers with larger vehicles since a smaller vehicle will have it's taillights more likely to be blocked by the cover and because there tends to be more wind at the rear of a smaller vehicle that could potentially whip the cover around on the highway.
    view full answer...

  • Recommended Bike Rack for a 2017 Volkswagen Golf Alltrack
  • At this time there aren't any trunk mounted bike racks confirmed to fit your 2017 Volkswagen Golf Alltrack. But there is a solution to carry bikes. You can add at trailer hitch receiver, # 24949, and use a hitch mounted bike rack instead of a trunk mount. Hitch mounted racks are much more stable than trunk mount and there's less chance of damage to the car. Then for a bike rack I suggest the Let's Go Aero BikeWing # B01311. The BikeWing is affordable, lightweight, and carries...
    view full answer...

  • Locking Anti-Rattle Hitch Pin for Use with a 1-1/4 Inch Hitch and 1-1/4 to 2 Inch Adapter
  • The first thing you will want to look at is the shank of the adapter. If it is hollow then you can use locking hitch pin # SHP2082 or # 63147. But if the shank is not hollow then you will need to use a regular anti-rattle device like # 93347 and lock # 5200. I must warn you that the use of an adapter reduces the tongue weight capacity of the trailer hitch by 50 percent. So if the combined weight of the bike rack and bikes is more than half the tongue weight capacity of the hitch you...
    view full answer...

  • Bike & Cargo Carrier Recommendations for 2016 Pleasureway Plateau FL Based on M-B Sprinter
  • We do offer 2-bike racks that tilt away or swing away from the vehicle to allow for better access to the rear cargo area. The thing is these racks are not rated for use on RVs like your M-B Sprinter-based Pleasureway. The reason bike racks must be rated specifically for use on an RV is the extra stresses found at the rear of such vehicles. The extra stress comes from the longer distance between the rear axle and bike rack; this longer distance translates into more vertical and lateral...
    view full answer...

  • Recommended Bike Cover For RV Ladder Rack Vertical Carry
  • We have have the BikeBag for Lets Go Aero Vme Hitch Mounted Bike Racks - 2 Bikes # B01571, but this is intended for horizontal bike mounting and even includes lighting for mounting in that orientation. Although it doesn't follow the shape of your bikes, you may be interested in using the Erickson Mesh Tarp and Truck Bed Cover - Heavy Duty - Black - 8' x 10' # EM57057 along with the Erickson Tarp Clip # EM51029 and the Master Lock TarpLok Bungee Cord w/ Secure Hooks - 24" Long # 3028DAT. If...
    view full answer...

  • Dimensions of Floor Panel on Lets Go Aero GearCage 72 x 32 Slide-Out Hitch Cargo Carrier H01397
  • The Lets Go Aero GearCage FP6 Slide-Out Cargo Carrier # H01397 measures 72 x 32-inches inside the top rails. The actual bottom/floor platform itself is smaller than these inside-the-rails dimensions. The floor platform actually measures 27 x 72-inches, which is narrower than the rail spacing by a total of 5-inches. This means that both in front of and behind the floor panel there are 2-1/2-inches of space with no floor under it. It is possible that the trike's two rear wheels would...
    view full answer...

  • Is there a Vehicle Tent that Will Fit a Ford Transit Connect
  • We may have an option for your Ford Transit Connect. As of right now the best option is likely going to end up being Rightline Gear SUV Tent, # RL110907. The opening for the sleeve that attaches to the vehicle is 76 inches wide and 58 inches tall and starts 21 inches up from the ground, see picture. But given the height of the opening at the back (6'7") it would be a little bit of a stretch but could work.
    view full answer...

  • Is there an Aero ArcHaus Tent Shelter that comes with the screen and floor ?
  • Let's Go Aero makes several tents that are economical and adaptable. The Aero ArcHaus Tent Shelter part # SAR024 is ideal for use as a canopy for shade or storage. It is a stand-alone shelter and does not attach to your vehicle. If you are looking for a more traditional camping tent, you will want to purchase part # SAR024-031, which includes the clip-on screen and floor insert. The added screen and floor will provide protection from insects and any other critters you might encounter. ...
    view full answer...

  • Availability of a Canopy or Screened in Porch for a 1998 Jayco Eagle 12
  • I might have a solution for you, however, we do not carry a product that will allow you to connect a screen porch or canopy to you trailer. You best option might be the Let's Go Aero ArcHaus, # SAR024-03. The ArcHaus measures 10 ft. x 6 ft. x 6-1/2 ft. with a floor dimension of 100 inches long x 64 inches wide. The ArcHaus is made of a water-resistant nylon material that will help keep you dry in wet weather. The front and rear panels have mesh screen that can also be removed by...
    view full answer...

  • Landing Gear for Lets Go Aero GearCage FP4 Slide-Out # H01380
  • Yes! The Landing Gear Cargo Carrier Load Support # H00550 is compatible with the 48x32 Lets Go Aero GearCage FP4 # H01380 and will make transporting it from storage to the back of your vehicle much easier! If you would like to add some security to your FP4 Slide-Out Carrier then you can use the Lock # ACC3250 with the threaded hitch pin that comes with the carrier.
    view full answer...

  • How to Secure the Lets Go Aero BikeWing-2 Part # B01311
  • I do have ways for you to secure the Lets Go Aero BikeWing-2 part # B01311 to the back of your R-Pod trailer but none of them will be completely foolproof as any thief that is determined enough could get to your bikes and the rack with the right tools. However, the mere presence of a lock is enough to stop most thieves and should give you peace of mind. In addition to the Snap-On Lock part # ACC3250, I also recommend using a cable lock and wrapping it around the bikes and then around...
    view full answer...

  • Hitch Mount Cargo Carrier That is at Least 60 x 30 Inches
  • The only carrier we have that meets both measurements is the Let's Go Aero GearCage # H01397 that measures 72 x 32 inches. The GearCage also slides out away from your vehicle helping you access the rear cargo area. Plus, it is also equipped with lighting so you don't have to worry about your gear blocking the vehicle's tail lights. I've attached a video for you to take a look at.
    view full answer...

  • RV Bike Rack Recommendation for Scamp 13 with Two Inch Hitch
  • At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the rear of the trailer which exaggerates the movement of the trailer when hitting bumps. Because of that only a few bike racks were designed to be reinforced enough for that type of use. The Advantage SportsRack V-Rack # HE1011 that you referenced...
    view full answer...

  • Load Limits on the Let's Go Aero Twin Tube Base System
  • The Let's Go Aero TwinTube Cargo Carrier, part # HMK901 is rated to carry up to 300 pounds in any position. This is true of all of the products that use the TwinTube system as their base. This rating is to provide for appropriate support from the minimum Class III hitch that the carrier will be loaded in. The TwinTube extends 18 inches, giving it a maximum distance of 55-3/4 inches when extended, and 37-3/4 inches when closed. The Boss Hog Cargo Carrier, part # H01472 has a...
    view full answer...

  • How to Determine if GearSpace 34 Enclosed Cargo Carrier HGK826 Will Clear Bumper/Spare of Vehicle
  • It would be pretty close but you will have to measure to be certain. I spoke with my contact at Let's Go Aero and the GearSpace 34 Enclosed Cargo Carrier # HGK826 (and the dark grey version # HGK819) have a distance of 10 inches from the center of their hitch pin hole to the back of the carrier. So you will need to measure from the center of the hitch pin hole out to the furthest point out on your rear spare to determine if this will fit. If that distance you measure is less than 10...
    view full answer...

  • Recommended Hitch-Mounted Bike Rack for Fat Bike with 4-1/2 Inch Wide Tires
  • I do have a solution for you, however the Lets Go Aero BikeWing T4 # B01458 referenced in your question is not designed to secure fat bike tires. I recommend looking at a carrier that is designed specifically to support the larger wheel sizes of fat bikes, such as the Hollywood Racks Trail Rider 2-Bike Rack # HR200-FB. This carrier can transport 2 bikes with a maximum tire width of 5 inches and a maximum wheelbase of 60 inches. It has a weight capacity of 45 pounds per bike. I recommend...
    view full answer...

  • Best Anti-Rattle Locking Hitch Pin for a Trailer Hitch Adapter with 1-1/4 Inch Shank
  • The 1-1/4 inch shank on the MaxxTow adapter # MT70355 is solid, see picture, so you will not be able to use anti-rattle hitch lock # 63147. But I do have a solution that you might like. You could use locking hitch pin # 5200 with anti-rattle device # 93347. It may not be the prettiest set up but it will give you a lock and anti-rattle.
    view full answer...

  • What Locking Hitch Bolt Will Fit Discontinued Hitch Mounted Yakima Roc 2 Bike Rack
  • The hitch bolt that will fit your Yakima Roc 2 is # Y8890200 providing your hitch has a 2 inch receiver. Your research was correct and this is the replacement for the obsolete bolt (8820052) you found. The Lets Go Aero Hitch Lock # 63232 that you referenced should fit your receiver since you have removed the threaded part of the locking mechanism from inside the bike rack shank. The Yakima # 8890200 is a bit longer than the Aero Lock, however, both will fit a 2 inch receiver. Both bolts...
    view full answer...

  • Need 2-Inch Hitch Extender With Hollow Shank for Use with # 63232 Anti-Rattle Receiver Lock
  • We do offer several 2-inch hitch extenders that have a hollow shank to allow use of an anti-rattle hitch lock such as the Lets Go Aero # 63232. These are available in various lengths. Do please note that whenever any extender is used it will reduce your hitch capacity by 50 percent. For example, we offer the Brophy 7-Inch Extender for 2-inch hitch receivers, part # HE06. We also offer an 18-inch extender from Hidden Hitch, part # HE18. If you need a dual receiver extension we offer...
    view full answer...

  • Compatibility Of Lets Go Aero Cargo Carrier 72x32 With Folding Adapter
  • The Folding Basket Adapter for 2" Trailer Hitch Mounted Cargo Carriers # 52015 is compatible with the 72x32 Lets Go Aero GearCage FP6 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs # H01397 even though it isn't designed for it. I've attached a photo to help you determine if you will have enough clearance from the center of the hitch pin on your vehicle for the cargo carrier to fit when folded up with the side rail height of 7 inches. The 300 lb limit is on all the Lets Go Aero...
    view full answer...

  • BikeWing Bike Rack Compatibility with Bikes with Rear Mounted Cargo Rack
  • The Lets Go Aero BikeWing-2 2-Bike Rack # B01311 has cradles that are 5 inches long at the plastic coating and the fat bike adapter # BMP038 has a length of 6-3/4 inches long at the plastic coating, so I'm confident that your bikes will work with this bike rack. The bottom pin won't be an issue, but depending on where you want to attach the cradle to your tire will determine if you will be able to use the standard cradle or if you will need to get the fat bike adapter to make the cradle...
    view full answer...

  • Can the Lets Go Aero BikeWing T4 Secure 4 Bikes of the Same Size
  • Yes, the Lets Go Aero BikeWing T4 4-Bike Rack # B01458 referenced in your question can absolutely handle 4 bikes of the same size, as long as they do not exceed a total weight of 180 pounds. The wheel cradles can be adjusted along the mounting bars to prevent bike to bike contact, especially when loading similarly sized bikes. The cushioned pads will also help protect the bikes from scratches while in transport. This is a really nice, unique hitch-mounted rack that features an extremely...
    view full answer...

  • Anti-Rattle Device Recommendation for Hitch Extender
  • Since your hitch extension is going to have a hallow shank I would recommend the anti rattle device part # 63232. This will work great as a way to reduce the movement in the hitch and extender. Check out the review video I attached as well.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.