Hi Wade, Yes, you’ve definitely got some good options to get away from hand cranking, and I totally get wanting something easier, especially with a cattle trailer. A lot of cattle trailers are gooseneck style and use a square center-mounted jack like…
Hello Jeff, Great question! The Bigfoot Hydraulic Jack - Single Pump - Manual Override - 12K #BF84FR does come with a single-point control box included. The control box has two buttons along with a key switch to turn the system on and off. It also…
Hello Philip, Thanks for writing in! Happy to clear up some confusion. The Lippert Level Up Hydraulic Leveling Jack - 14K - Gen 2 - Clear - Dome - JIC #LC28CK, which is Lippert's part number 2024015099, was just added to our site in March 2026.…
Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…
Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…
Hey Cary, I did some research and it looks like the hitch height for your 2026 GMC 1500 AT4X AEV is right at 24 to 25 inches in height. Typically trailer's have a coupler height that is between 16 and 19 inches in height so I would go with the 7…
That one does not, however I have a similar wheel that does. The Aluminum AM03 Series Black Machined Trailer Wheel item #AM43NR is what you'll need for 9/16" lug studs. This wheel has a 8 on 6-1/2 lug nut pattern so it's going to work…
Hi Jimmy; the Dexter Self-Contained Hydraulic Jack #DX72CR is designed to be bolted or welded onto the trailer frame. They don't offer a separate mounting bracket for installation and hardware will have to be acquired locally if you're…
Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".
Hey Debra, The great thing about the Draw-Tite hitch spare tire carrier #6715 is that it is universal! Meaning it will fit any bolt pattern and tire size. I have had people use this with that same bolt pattern with no issues. The one thing to keep in…