2014 Jeep Wrangler Lamp Guards

Hey Darin, the 30k and 25k versions of the Curt PowerRide fifth wheel hitches use different leg and head kits so they are not interchangeable. If you wanted to upgrade to a 30k hitch you'd need an all new hitch with the part #C48BR. Do you have a…

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

Hey Dave, thanks for reaching out! The panels for the etrailer Hard Tonneau Cover #e73DR are about 21" wide, and when folded up in your 2024 Ford F-350 Super Duty they will take up about 2' when you include the other parts of the cover.

Brandon, the Curt OEM 5th Wheel Hitch Legs #C25JR is not going to work with either the A25 or A30 because it is designed for the Curt PowerRide 5th Wheel Trailer Hitch #C22ER. Instead, for your Curt A25 or A30 you're going to need the Replacement…

Greetings Tim; when you choose a WDH you want to go off of the tongue weight of your loaded setup. The best way to find this is to measure with a scale like the #BTBRV44FR. Since you provided the specs for your trailer we can take a guess to help…

Hey there Kyle; the bag that came with your Big Truck Big RV Tongue Weight Scale #BTBRV44FR is available separately. The Big Truck Big RV Accessories Bag #BTBRV002 is what you're looking for.

Hi Mike; to find the right weight distribution hitch for your 2023 Jayco Jay Flight 240RBS you will need to know the tongue weight of your loaded setup. The best way to find this is with a tongue weight scale like the #BTBRV44FR. You can also use one…

The correct Yakima OverHaul HD Truck Bed Ladder Rack for a 2023 Toyota Tacoma with RetraxPRO XR Hard Tonneau Cover like part #RTT-80851 is the part #Y01151-5755. This is an excellent combo which allows you to haul elongated gear on top of your cover…

Generally speaking, most leveling kits lift the front of the truck 1-2" to match the rear as the factory ride height on most pickup trucks nowadays is about 2" lower in the front than in the rear. This is usually to compensate for squatting…

It sounds like the anti-rattle hitch bolt in your old Yakima ROC'nGate is causing issues by not tightening up all of the way. Assuming the bolt itself is what is bad you can just replace it with #Y8890200. When it comes to replacement parts for…

The only difference between the Timbren Suspension Enhancement System part #TFR250SDJ which is for a Ford F-250 and the Timbren Suspension Enhancement System part #TFR350SDJ which is for a Ford F-350 is that the latter comes with a 1/2" spacer,…

Out of the tonneau covers that we offer for your 2017 Ford F-350 the BAK Revolver X2 #BAK39331 is my favorite. It combines the sleek look of a soft roll up cover with the strength of a hard top. It is actually strong enough to hold up to 400 lbs of…