Written by: Izzy B.

Updated on: 2/5/25

Est. time to read: 3 mins.

Trash your Ratchet Straps

6 Ways Benton’s HotMesh Keeps Your Cargo Safer

There’s a pretty long list of things that can go wrong when you’re using ratchet straps to tie down cargo (and most of those scenarios end with your stuff flying off the cargo rack and into the ditch). Packing up for a trip shouldn’t feel like a high-stakes game of tetris; you deserve a stress-free solution that keeps gear safe once and for all. Thankfully, the folks at Benton took extra care to design a solution that’d put an end to questionably tied-down gear. Let’s take a look at some of the most common mistakes people make when securing cargo with ratchet straps, and see how the HotMesh Cargo Net can help you avoid them.

1. You Won't End Up Using the Wrong Straps

The Problem:

Cheap straps (and bungee cords too for that matter) aren’t built to handle heavy loads or uneven terrain. They stretch, snap, and leave your gear unsecured and vulnerable to damage.

The HotMesh Solution:

The HotMesh’s durable construction offers a sturdy, all-in-one solution that outlasts and outperforms traditional straps. And with a secure mesh design to hug everything in place, there aren’t any large gaps for errant gear to fall through.

2. It's Impossible to Mess Up Strap-Placement

The Problem:

Attaching your ratchet straps improperly can make it impossible to get evenly distributed tension across your whole load. This can cause your cargo to shift around and destabilize during travel.

The HotMesh Solution:

With its wide coverage and easy-to-adjust design, the HotMesh ensures your entire load stays firmly in place. The integrated straps allow for ultra-precise placement, and its reinforced netting cradles even the most oddly-shaped gear—so all your cargo stays equally supported.

3. You Never Have to Worry, "Do I have Enough Straps?"

The Problem:

Not using enough straps can leave big gaps for your items to fall through.

The HotMesh Solution:

The HotMesh replaces multiple straps with a single, versatile net that covers your entire load. Whether it’s a stack of camping gear or family luggage, this net has it all secured in one go.

4. It's 100x Easier to Tension Your Straps Correctly

The Problem:

Improperly tightened straps allow cargo to slide around, while overtightened onescan run the risk damaging your gear (or even the straps themselves).

The HotMesh Solution:

The HotMesh’s built-in tension system keeps everything snug without over-tightening. Once it’s secure, your cargo stays put, even on bumpy roads or during sudden stops. And since the HotMesh’s netted design evenly compresses your load from all angles, that means you don’t have to worry about overtightened straps denting your most fragile gear.

5. You Can Stop Worrying About Your Straps Wearing Out

The Problem:

Old, frayed, or worn out ratchet straps can snap under pressure, turning a routine trip into a cargo rescue mission.

The HotMesh Solution:

Made with heavy-duty PVC fabric and dual-layered polyester mesh, the HotMesh is built to last. Its durability means you can count on it trip after trip, so you won’t end up running out into the highway to save your pricey camping gear (or worse, your kid’s suitcase with all their most irreplaceable toys).

6. No More Pulling Over to Re-Tighten Your Straps

The Problem:

Straps can loosen over time, especially during long drives. To keep them tight and fully functional, you have to periodically pull over to check and retighten them, or else you can say goodbye to your gear.

The HotMesh Solution:

The HotMesh’s reliable design minimizes shifting and loosening, even with the heavy jostling that comes from driving down an uneven road. Thanks to its dependable grip, you can focus on the trip ahead instead of figuring out when and where you can take your next roadside pit stop.

Whether you’re heading out for a weekend camping, taking a family vacation, or just going for a highway adventure, the Benton HotMesh Cargo Net lets you skip the hassle and focus on fun. Ready to make cargo chaos a thing of the past? Get your Benton HotMesh Cargo Net today!

About Izzy B.

My journey with etrailer has had a number of twists and turns. I first started here in 2019 as a Summer Intern with our Content Department. I ended up enjoying the experience so much, that I came back to work at etrailer during several academic breaks throughout my college years. After some time away, I returned last Spring to work at our main warehouse, first as a Picker, and eventually on our Audit Team. Then, at the start of 2024, I was offered the chance to come aboard etrailer's Marketing Department, as a Writer for the Shopping Guide Team. Now, I help our neighbors by creating informational content to aid their shopping experience, ensuring they find the info, products, and solutions they need to get their own journeys underway!

Related Products

Explore Expert Info

on Cargo Nets

Videos

for Cargo Nets

Help Articles

for Cargo Nets

Expert Answers

for Cargo Nets

Benton MoveHitch Cargo Carrier with Cargo Net In-Depth Review

2026 Subaru Outback Test Fit - Benton MoveHitch 60x24 Cargo Carrier

Fit Check Benton MoveHitch Cargo Carrier w/ Cargo Net - 2020 Subaru Outback Wagon

Test Fitting the Benton MoveHitch 60x24 Cargo Carrier - 2022 Airstream Interstate Nineteen Motorhome

2023 Kia Seltos - Benton MoveHitch 60x24 Cargo Carrier Fit Verified

Benton MoveHitch Cargo Carrier with Cargo Net Fit Check - 2026 Hyundai Palisade

Installation Guide etrailer Hitch Receiver - 2026 Honda CR-V

Benton Basic Hitch Modular Cargo Carrier with 2 Enclosed Cargo Carriers Comprehensive Review

Checking Out the etrailer Anti-Rattle Locking Hitch Pin

Review of etrailer Hitch Anti-Rattle - Hitch Lock - e43JR

A Closer Look at the Benton HotMesh Cargo Net for 24x60 Cargo Carriers

Curt T-Connector Vehicle Wiring Harness Review C56040

What is Payload Capacity vs. Towing Capacity?

Hitch Mounted Cargo Carrier Information

What Happens If My Tongue Weight Is Too Heavy?

How Do I Know If My Trailer Is Too Heavy?

Upcoming 2025 Ford F-150 Must-Have Accessories

What Is Towing Capacity?

What Kind of Hitch Do I Need for a Travel Trailer

5 Reasons Your Bike Rack Needs an Anti-Rattle Hitch Collar

The Best Hitch Stabilizer for Family Road Trips & Outdoor Fun

Hitch Anti-Rattle Devices: The Ultimate Guide

Trailer Hitch Receiver Sizes

Upcoming 2025 Chevy Silverado Must-Have Accessories

Was Strength Testing Performed On Benton MoveHitch

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Will Benton MoveHitch Work With an etrailer Anti-Rattle Hitch Collar

Hey Jason! You can definitely use the two together. The etrailer Anti-Rattle Hitch Collar #e38FV installs at the hitch receiver. The alignment collar on the Benton MoveHitch #B86VR and #B38VR (with cargo net) just helps you line it up with the hitch…

view full answer...

Comparing Trailer Hitches for 2019 Honda CR-V

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

What Does a Trailer Tire Load Range Mean

I believe you mean Load Range since the Load Ranger was the unsuccessful brother of the Lone Ranger. For any given tire size there can be different load ranges. The different load ranges have different weight capacities. This has to do with the…

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Comparing Kenda KR03, KR35, And KR53 Tires

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Instructions to Wire a Trailer for Electric Brakes

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...