Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
Illuminate Your Projects with Recessed Round Work Lights
Recessed round work lights are perfect for those looking to upgrade their lighting setup with a sleek, modern design. Ideal for vehicles, trailers, and even entertainment centers, these lights offer bright, reliable illumination. Easy to install and versatile, they fit seamlessly into various applications, ensuring your projects are always well-lit.
Recessed round work lights provide a streamlined look while offering powerful illumination. They're perfect for replacing existing lights on vehicles like trailers and motorhomes, ensuring bright, even lighting without protruding fixtures. This makes them ideal for both aesthetic upgrades and functional improvements.
These lights are designed for straightforward installation, often fitting into existing grommets or mounts. With simple plug-and-play wiring, you can quickly replace old lights without needing extensive modifications. This ease of installation is a major plus for DIY enthusiasts and professionals alike.
Yes, these lights are versatile enough for indoor applications, such as in entertainment centers. Their compact design and bright output make them a great choice for replacing burned-out lights, providing consistent illumination while maintaining the original look and feel of the setup.
Absolutely! While primarily designed for specific uses, these lights can be adapted for various applications, like license plate lighting or custom projects. Their bright output and compact design make them a flexible choice for creative lighting solutions.
LED recessed round work lights offer energy efficiency, long lifespan, and bright illumination. They're perfect for those looking to reduce energy consumption while maintaining high-quality lighting. Plus, their durability makes them a reliable choice for both indoor and outdoor use.
Filters
