Hey Justin, welcome back! The 136" measurement on the Parking Brake Kit #T2385201 is the overall length of the rear cable. It runs back roughly half that length on each side from where it runs through that central bracket. What kind of trailer…
Hello Chris, Thanks so much for writing in and a double thank you for including the full brake assembly part number. That is incredibly helpful! Since you have the Kodiak Disc Brake Kit 11.35" Rotor #120 Spindle 12K ALKO #K2HR12A11-120DW, you…
Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey, Bill! I did some searching about the light that you currently have. Part number 1A-V-1260AR is a Kaper II light, unfortunately we don't carry that brand of light. The Peterson light part #2637R would be a comparable light. We don't have…
Hey, Brent! We have just what you need. I reached out to Lippert to get the information about the hub you need and you will bee Lippert part #LC72DX. This is a hub and drum assembly that is pre-greases so the seal, inner, and outer bearings are…
The locking storage box #M387FR mounts in the floor. As long as you have the 19" wide x 29" long x 7-1/4" deep space, it can absolutely work in a toyhauler. The box recesses into the floor and is powder coated for protection against…
Hey Chris, the Bulldog jack part #BD190758 would do decently in a saltwater environment but honestly it's not going to last forever. The zinc coating and the powdercoat will eventually allow the steel underneath to corrode. Now if you were to be…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Since different manufacturers can use different color wires you need to test the wires by function and not by color. If there is no white wire present, you can trace the wiring on your trailer to find out where the wires terminate. The wire that is…
Hey Myron! With that 2-1/2" lift you will need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift #AL52420. The spacers will install underneath the cradle on the #AL88FF. I also recommend adding an air…
Hey Justin, welcome back! The 136" measurement on the Parking Brake Kit #T2385201 is the overall length of the rear cable. It runs back roughly half that length on each side from where it runs through that central bracket. What kind of trailer…
Hello Chris, Thanks so much for writing in and a double thank you for including the full brake assembly part number. That is incredibly helpful! Since you have the Kodiak Disc Brake Kit 11.35" Rotor #120 Spindle 12K ALKO #K2HR12A11-120DW, you…
Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey, Bill! I did some searching about the light that you currently have. Part number 1A-V-1260AR is a Kaper II light, unfortunately we don't carry that brand of light. The Peterson light part #2637R would be a comparable light. We don't have…
Hey, Brent! We have just what you need. I reached out to Lippert to get the information about the hub you need and you will bee Lippert part #LC72DX. This is a hub and drum assembly that is pre-greases so the seal, inner, and outer bearings are…
The locking storage box #M387FR mounts in the floor. As long as you have the 19" wide x 29" long x 7-1/4" deep space, it can absolutely work in a toyhauler. The box recesses into the floor and is powder coated for protection against…
Hey Chris, the Bulldog jack part #BD190758 would do decently in a saltwater environment but honestly it's not going to last forever. The zinc coating and the powdercoat will eventually allow the steel underneath to corrode. Now if you were to be…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Since different manufacturers can use different color wires you need to test the wires by function and not by color. If there is no white wire present, you can trace the wiring on your trailer to find out where the wires terminate. The wire that is…
Hey Myron! With that 2-1/2" lift you will need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift #AL52420. The spacers will install underneath the cradle on the #AL88FF. I also recommend adding an air…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Illuminate Your Work with LED Rectangle Work Lights
LED rectangle work lights are perfect for enhancing visibility in various settings, from trailers to tractors. Their durable design and bright output make them ideal for both professional and personal use, ensuring you have the light you need, wherever you need it.
These lights are built to withstand tough conditions, including salt and road slush. They maintain performance over time, making them reliable for outdoor use on trailers and tractors.
LEDs offer brighter, more consistent lighting and are generally more durable. While some may experience issues, many find them superior for long-term use, reducing the need for frequent replacements.
Absolutely! These lights are excellent for tasks like snow plowing, providing bright illumination over 100 feet, making them perfect for dark, winter conditions.
Yes, they are versatile and can be easily installed on various vehicles, from trucks to buses. Options like magnetic switches make them convenient for setups like cargo systems.
They provide excellent light dispersion, ideal for backup lighting on trailers and vehicles. While they may not reach far, they offer great angled lighting for reversing.