Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Illuminate Your Workspace with Yellow LED Work Lights
Yellow LED work lights offer a vibrant, energy-efficient solution for illuminating your workspace. Perfect for construction sites or garages, these lights provide excellent visibility and durability. The yellow hue is ideal for reducing glare and enhancing focus, making them a top choice for professionals and DIY enthusiasts alike.
Yellow LED work lights are great for reducing glare and eye strain, making them perfect for long hours of work. They enhance contrast and visibility, especially in foggy or dusty conditions, which is why they're favored in construction and outdoor settings.
These lights excel in various environments, from construction sites to workshops. Their robust build and energy efficiency ensure they withstand harsh conditions while providing consistent, bright illumination, making them reliable for both indoor and outdoor use.
LED technology offers superior energy efficiency, longer lifespan, and lower heat output compared to traditional bulbs. This means you get bright, reliable light without frequent replacements or overheating issues, perfect for demanding work environments.
Yes, these lights are designed for easy installation and use. They often come with adjustable mounts and simple plug-and-play setups, allowing you to quickly position them for optimal lighting without hassle.
Minimal maintenance is needed. Regularly check for dust or debris on the lens to ensure optimal brightness. Thanks to their durable design and long-lasting LEDs, these lights require less frequent bulb changes and repairs.
Filters
