Wheel Chocks

Hey Dan, the Power Mountain Tallboy Off-Road Bottle Jack part #PM34FR will work great for you. It has the needed weight capacity and height to help you work on your 9,000 lb travel trailer. It is definitely safe for use with travel trailers. Are you…

Hey Chris, yes the TImbren part #T24CR does fit your 2024 Nissan Frontier 2 wheel drive.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Dennis, thanks for reaching out! The 4-Leaf Double-Eye Spring #DX23CR has a 3" drop from center eye to middle of the leaf spring (see attached photo). For a single axle setup I recommend the Hanger Kit #APS4, and for a tandem axle setup I…

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…

Hello Mark, thanks for reaching out. The TRED GT Camper Leveler Blocks #RR84AP are rated for 5,000 KG which is about 11,000 lbs. So these will be a great upgrade from wood blocks, so long as they are appropriately rated for your RV. When using…

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

Hey John, there's no reason you couldn't use the Blue Ox Wheel Chocks part #BLU47UR on all 4 wheels of your trailer as like a temporary lift. The pair alone has a 30k weight capacity as well so in that regard it would work great too.

Hello Thomas, thanks for reaching out. Blue Ox and Reese are both solid options for a weight distribution hitch. Between the two I would lean towards Blue Ox, just because their systems tend to be a bit more user-friendly and they will offer better…

Good afternoon Stephany, I'm sorry you had that less-than-stellar experience with the pin style anti-rattle device. Normally that setup works pretty well, but in some extreme towing situations, I definitely think the clamp style is better at…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Hey Darin, the 30k and 25k versions of the Curt PowerRide fifth wheel hitches use different leg and head kits so they are not interchangeable. If you wanted to upgrade to a 30k hitch you'd need an all new hitch with the part #C48BR. Do you have a…

Hey Dan, the Power Mountain Tallboy Off-Road Bottle Jack part #PM34FR will work great for you. It has the needed weight capacity and height to help you work on your 9,000 lb travel trailer. It is definitely safe for use with travel trailers. Are you…

Hey Chris, yes the TImbren part #T24CR does fit your 2024 Nissan Frontier 2 wheel drive.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Dennis, thanks for reaching out! The 4-Leaf Double-Eye Spring #DX23CR has a 3" drop from center eye to middle of the leaf spring (see attached photo). For a single axle setup I recommend the Hanger Kit #APS4, and for a tandem axle setup I…

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…

Hello Mark, thanks for reaching out. The TRED GT Camper Leveler Blocks #RR84AP are rated for 5,000 KG which is about 11,000 lbs. So these will be a great upgrade from wood blocks, so long as they are appropriately rated for your RV. When using…

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

Hey John, there's no reason you couldn't use the Blue Ox Wheel Chocks part #BLU47UR on all 4 wheels of your trailer as like a temporary lift. The pair alone has a 30k weight capacity as well so in that regard it would work great too.

Hello Thomas, thanks for reaching out. Blue Ox and Reese are both solid options for a weight distribution hitch. Between the two I would lean towards Blue Ox, just because their systems tend to be a bit more user-friendly and they will offer better…

Good afternoon Stephany, I'm sorry you had that less-than-stellar experience with the pin style anti-rattle device. Normally that setup works pretty well, but in some extreme towing situations, I definitely think the clamp style is better at…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Hey Darin, the 30k and 25k versions of the Curt PowerRide fifth wheel hitches use different leg and head kits so they are not interchangeable. If you wanted to upgrade to a 30k hitch you'd need an all new hitch with the part #C48BR. Do you have a…