Seaflo 12V RV water pumps keep your faucets and shower running smoothly off your coach's battery. Models with variable-flow operation can reduce hard cycling and may be quieter than older Shurflo units, especially when securely mounted. Choose capacity to match your rig's psi limit and number of fixtures, and plan for standard wiring with fittings that may differ from your old pump.
Yes, Seaflo pumps are compatible with accumulator tanks, which can smooth flow and help reduce vibration and noise. They've been used on boats and with portable water containers for transfer. When using jugs, a 12v power source works well; keep connections dry and secure, and purge air after hookups for steady flow.
Some prime quickly or need no priming, while others can take a long time. With a water source about 16" below the pump, self-priming may not start. Double-check inlet and outlet orientation, then purge air and let it run a bit before giving up. If drawing from a container, testing with the pump near water level can help.
Match your system's flow rate and pressure rating, and confirm it's 12v. Check mounting holes and water line fittings—some line up perfectly while others may need an elbow. Be ready to adapt wiring; included connectors may not fit every setup, and some installs used wire nuts. After install, purge air from the system for best performance.
It can be quieter, especially compared to older Shurflo models. Seaflo variable-flow runs based on demand, which can reduce hard cycling at low use. Mount it securely to help minimize vibration. Note that some installs report loud operation, and an oversized pump can cause plumbing vibration (waterhammer). An accumulator tank can help smooth flow.
Diaphragm Pump
Inline Booster Pump
Macerator Pump
Filters
