It sure is Barry! The SoftStartRV Soft Start item #SSR54FR is exactly what you need for a Furrion AC unit. It'll lower the amps required during startup so you can run other appliances at the same time or power your Grand Design off of a…
Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.
Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…
Hey George, yes we do have a rain cover for the Watchdog Power Center part #HU74ZR with the part #HU88FR.Did you have the previous generation Watchdog?
Hey Mike, thanks for reaching out. Yep, the Victron SmartShunt 500A #VN43ZR will work just fine with a 24-volt lithium battery bank. It's compatible with battery systems from 6.5 to 70 volts, so a 24V LiFePO4 setup is well within its operating…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Hello again Fred, What did you have in mind for an upgrade? If you're switching over to Lithium you can use the WFCO Auto-Detect RV Converter Charger #WF38FR. This is the same WF-9855 but with their auto-detect (AD) technology so it will identify…
Hey Stacey! To install the Victron Orion XS DC/DC RV Converter #VN93VR you will need appropriately sized wire and fuses. Victron recommends 16 mm² / 6 AWG (13.3 mm²) cable if the distance is less than 5 meters, and 4 AWG (21.2 mm²) if…
Thanks for your question, Eddie. The short answer is yea, you can install the Pacbrake air bags with on board air compressor and 2-1/2 gallon tank, part #PB77SV. However, there are a few things to keep in mind. Since your truck is equipped with the…
The Mighty Cord RV Power Cord Adapter, #A10-3050D90VP is used to adapt your RV's 4-prong 50-amp power inlet for use with a 30-amp 3-prong extension cord/Power Pedestal. A 50-amp plug has four prongs with two of them providing 50-amps of power…
Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Easily convert your RV's power needs with a 15 Amp to 30 Amp adapter. Perfect for turning a standard RV extension cord into a heavy-duty 115-volt extension cord, saving you money and hassle. These adapters are well-made, sturdy, and designed to last, making them a reliable choice for any RV adventure.
This adapter allows you to connect a 15 Amp power source to a 30 Amp RV plug, effectively converting the power to suit your RV's needs. It's a simple and effective solution for using standard power sources without needing to buy expensive cords.
These adapters are crucial for RV owners who need to connect to different power sources. They provide flexibility and cost savings by allowing you to use existing cords and avoid purchasing new, expensive ones.
Look for durability and ease of use. A sturdy build with a comfortable handle for easy plugging and unplugging is ideal. Ensure the adapter is well-made to prevent any potential electrical issues.
Yes, these adapters are designed to handle heavy-duty use, turning a standard RV extension cord into a robust 115-volt extension cord. This makes them perfect for powering your RV without the need for costly new cords.
Ensure you understand the prong configuration before purchasing. Some may mistakenly think the 30 Amp male has three identical prongs, so double-check to avoid ordering the wrong adapter.
Filters
