Hey Richard, the Bauer NE RV Entry Door Lock for Trailers #BA53UR that you referenced SHOULD fit your Entegra Condor as it was designed to fit the standard RV door cut outs that measure 3-3/4" tall x 2-3/4" wide which your RV should have…
...Hey Jacob, we have the Global Link RV entry door latching lock kit part # BA53UR that would work great as it matches the door cut out dimensions you have. Did you old one break...
Hi Chad; the inside handle on the Bauer NE RV Entry Door Lock #BA53UR is made of plastic. This fits cutouts that are 3-3/4" tall x 2-3/4" wide. Let me know if you have any other questions.
Hey Shawn, congrats on the new 5th wheel trailer. The Watchdog Power Center Surge Protector and Voltage Booster item #HU74ZR is all you're going to need. Adding in the Power Watchdog Surge Protector item #HU82VR would be redundant. The item…
Hey Shannon. Sorry but the Global Link RV Lock with Bluetooth Connectivity item #GL62VR only fits doors between 1-1/4" 1-1/2" thick. The Bauer EM RV Entry Door Lock for Motorhomes item #BA93UR is the only option we have that fits doors up…
Hey Roger! The Global Link RV Lock with Bluetooth Connectivity #GL62VR you were looking at is a great option, but I'll need you to confirm the cutout size you have on your 2021 Thor door. This fits a 4.6" x 6.9" cutout so if you have…
Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
...I need help in locating a Bauer keyless RV entry door lock. My motorhome is a 2017 Newmar Bay Star, class A platform. The current door latch measures approx. 5.5 inches wide and 7.5 inches tall...
Since RV door latches are basically all pretty universal we do carry replacement cargo door latches like the Global Link RV Baggage Door Slam Latch part #295-000015.
Hey David, do you mean to cut the plug off of the Watchdog Power Center Surge Protector and Voltage Booster #HU74ZR and then wire it to your RV outlet? If so, it would be just a matter of cutting and stripping wires to pull this off.
Hey Larie, we have the Bauer RV Entry Door Lock part #BA53UR that you referenced which was designed to fit the standard RV door cut outs that are 3-3/4" tall x 2-3/4" wide which I would bet is correct for your Winnebago Minnie Winnie but I…
The cylinders for the latches need to be measured for length to get you the correct replacements. This means removing the lock cylinder which should not be difficult if it is able to be removed as some are and some are not. If you disassemble the…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Filters
