Is Bauer NE RV Entry Door Lock Inside Handle Made of Plastic or Metal

Question

Question:

Is the inside handle made of plastic or metal?

asked by: Chad

0

Expert Reply:

Hi Chad; the inside handle on the Bauer NE RV Entry Door Lock # BA53UR is made of plastic. This fits cutouts that are 3-3/4" tall x 2-3/4" wide. Let me know if you have any other questions.

expert reply by: Robin H

0

Bauer NE RV Entry Door Lock
(click to enlarge)

Robin H.

9/12/2025

Hey Chad, did the plastic handle on the Bauer RV Entry Door Lock work out for your needs? I'm asking because your experience could help others who are considering similar upgrades.

Chad

9/12/2025

@RobinH I did not purchase this product, I have a similar product with a plastic back plate that flexes when you pull on it. When I asked the question, I was worried the handle would potentially snap, a medal back plate would be a superior product and catch my attention.

Answer 1

Hey Richard, the Bauer NE RV Entry Door Lock for Trailers #BA53UR that you referenced SHOULD fit your Entegra Condor as it was designed to fit the standard RV door cut outs that measure 3-3/4" tall x 2-3/4" wide which your RV should have…

view full answer...

Answer 2

Hey Jacob, we have the Global Link RV entry door latching lock kit part #BA53UR that would work great as it matches the door cut out dimensions you have. Did you old one break?

view full answer...

Answer 3

Hey Shannon. Sorry but the Global Link RV Lock with Bluetooth Connectivity item #GL62VR only fits doors between 1-1/4" 1-1/2" thick. The Bauer EM RV Entry Door Lock for Motorhomes item #BA93UR is the only option we have that fits doors up…

view full answer...

Answer 4

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 5

Hey Chris! The Hellwig Front Anti-Sway Bar #HE26GR and Rear Anti-Sway Bar #HE78RR will fit your motorhome. These are confirmed to fit both Class A and Class C motorhomes on the E-450 chassis so you're good either way. Adding front and…

view full answer...

Answer 6

Hello Rory, Thanks for writing in. Yes, you can add the Furrion Vision S+ Wireless RV Observation System #FR64AD on your cargo trailer. I would mount the rear camera at the upper rear edge (see attached image) of the trailer rather than flat on the…

view full answer...

Answer 7

Hello Mark, Thanks for writing in! We definitely have a few MORryde handrail options that could work for the bedroom entrance on your 2025 Alliance Delta 252RL. I do want to apologize though, because I don't have access to the schematics for your…

view full answer...

Answer 8

Hey Robert, thanks for reaching out. You asked a good question so I went ahead and ran that by my contact at Bauer. They said the Bauer NE RV Entry Door Lock #BA53UR can be programmed with up to 256 entry codes. I hope this helps and let me know if…

view full answer...

Answer 9

Yes, the ears were added to the Dexter Semi-Metallic Disc Brake Pads #K71-629. The ears are there now to prevent the pads from falling down through the caliper when you are trying to align the mounting bolt or when you remove the mounting bolt.

view full answer...

Answer 10

Hey Vinnie! That cutout size isn't easy to match. The closest thing we have that also gets you an electronic lock is the Bauer NE RV Entry Door Lock for Trailers #BA53UR. This fits a cutout measuring 3-3/4" tall x 2-3/4" wide.…

view full answer...

Answer 11

Hey Larie, we have the Bauer RV Entry Door Lock part #BA53UR that you referenced which was designed to fit the standard RV door cut outs that are 3-3/4" tall x 2-3/4" wide which I would bet is correct for your Winnebago Minnie Winnie but I…

view full answer...

Is Bauer NE RV Entry Door Lock Inside Handle Made of Plastic or Metal

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching