Kuat offers racks suited for RV duty, with options rated for travel trailers, 5th wheels, and Class B motorhomes when the hitch is attached to the frame, and some approved behind a flat towed vehicle. Check fit details like a 2" hitch and 40 lbs per bike capacity when used with an RV. Accessories such as a swing-away work on cars, trucks, and SUVs, and some racks add anti-rattle or LED lights.
Yes, select Kuat racks are rated for travel trailers, 5th wheels, and Class B motorhomes. Make sure the hitch is attached directly to the frame, not the bumper. Check that the rearmost point of the hitch is not more than 64 inches from the rear axle. If mounting on a flat towed vehicle, confirm the rack is specifically rated for that extra side-to-side stress.
Use Kuat swing-away extenders only on a 2" hitch on a car, truck, or SUV. They let you pivot the rack to access the rear, which is handy for tailgates and hatches. Do not use the swing-away on a camper or motorhome. Verify your hitch size and orientation (driver or passenger side swing) before ordering.
Use a dry silicone spray or a dry PTFE spray on the moving parts. Wipe off dust first, then lightly spray the pivot at the base of the arm and cycle it several times. Avoid grease or standard oil since they attract dirt. Wipe off any excess after cycling to keep things clean.
Add a strong strap or bungee to stabilize bikes in addition to the rack's hold-downs. Tighten all hardware—getting everything tightly bolted matters. Built-in anti-rattle features help reduce movement. For RV use, confirm the rack is approved for trailers and check the per-bike capacity specifically listed for RV applications.
The arms capture the wheels very well but can take some getting used to. Check your wheel size against the rack's trays, since a rear wheel holder may feel a little small for some setups. Test the arm movement and tray fit during assembly, and recheck bolt tightness after your first few drives.
Filters
