Will Lets Go Aero Bike Rack Fit Camp Inn Teardrop Camper Tongue?
Updated 06/04/2026 | Published 05/28/2026
Products Featured in This Question
Question:
Hi, I have a camp inn rain trailer. Wondering if the let’s go aero jack e bike rack would fit this trailer? Looks like the width of the a frame is 25 wide. Thanks in advance! Ginger
asked by: Ginger L
(click to enlarge)
Expert Reply:
Hey Ginger!
The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack # LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would work fine.
Were you measuring that way? In the photo it looks like you may actually only have about 21" or so of clearance from the camper front end to the center of the jack hole on the tongue. Let me know and I can make sure it'll work or not because if it's the 21" then it won't be enough room to fit.
If you don't have ebikes then another solution would be the Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes # LGA47ZR which typically mounts over the jack on the trailer tongue. Even though you don't have a jack, it'll still fit that space with the included hardware for mounting it. Capacity is 40lbs per bike.
One more solution would be a rear bumper mounted bike rack, if you have a rear bumper on the camper.
Let me know what you think or what bikes you need to haul and we will figure out the best option for you!
Product Page this Question was Asked From
Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack
- RV and Camper Bike Racks
- Platform Rack
- Trailer Tongue Rack
- Wheel Mount
- 2 Bikes
- Travel Trailer
- Electric Bikes
- Heavy Bikes
- Lets Go Aero
more information >
Continue Researching
- Video: Swagman Stratus RV Frame Mount 2 Bike Rack Feature Review
- Video: Assembly of the Swagman Stratus RV Frame Mount 2 Bike Rack
- Q&A: Options For Mounting 2 Bikes On Tongue Of 2025 Forest River RPod 171 Teardrop Camper
- Shop: Truck Topper
- Shop: Swagman Stratus Bike Rack for 2 Bikes - RV Frame Mount
- Shop: Fas-top Solo Soft Truck Bed Topper - Collapsible - Removable
- Q&A: Can Lets Go Aero Jack It Plus be Used with Scamp Trailer
- Shop: Aluminum Eagle Trailer Wheel - 14" x 5" Rim - 5 on 4-1/2 - Gunmetal Gray
- Shop: Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2
- Shop: Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack
- Shop: Dexstar Steel Sportsman Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - Camo Strata
- Shop: Americana Trailer Wheel Center Cap - Stainless Steel - 3.19" Pilot
- Video: A Closer Look at the etrailer Scissor Stabilizer Jacks with Handle and Drill Adapter
- Q&A: Bike Rack Solution for when Towing A-Frame Trailer that Holds Bikes Above Jack
- Q&A: Replacement Wheel Recommendation for a 2018 Forest River Flagstaff HW27KS Camper
- Video: All About the Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes
- Video: Review of Lionshead Trailer Tires and Wheels - Aluminum Wheel Only - LH63VR
- Q&A: Determining Needed Weight Capacity for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
on RV and Camper Bike Racks
Cutty C.
6/4/2026
Make sure you measure from the trailer location that is closest to jack. My trailer front slopes up toward the jack so you have to measure from the closest part of the trailer to the center of the jack. Depending on your bikes pedals and handle bars you may need more than 24 1/2 inches. I needed at least 25 inches to keep the bike from hitting the trailer. I only had 21 1/2 inches so I moved the 2 rails that hold the bikes and the center support 3 1/2 inches away from the trailer and closer to the jack. DO NOT MODIFY THE RACK! WITH THE RAILS CLOSER TO THE JACK I BENT THE RIM ON MY BIKE AND DAMAGED MY TRUCK WHEN I BACKED THE TRAILER MAKING A SHARP TURN THE BIKE AND RAILS HIT THE TRUCK.