Dial in focused task lighting in your rig with a reading light paired to the efficiency of an LED light. These hook up to 12 volt power and ground, and some use white and black RV leads for a straightforward swap from older fixtures. For extra convenience, consider adjustable aim, touch switching, independent base/spot control, or a USB port to fine-tune how you read at night.
Yes, these are designed for standard 12V RV wiring. Connect the existing 12 volt power wire and ground wire to the fixture's white and black leads. Install is typically easy over a headboard or cabinet. If you can't hide the wires in the wall, plan a surface run and cover it with a channel from a hardware store.
On models with a USB port, the port can be active at all times and not affected by the light's switch, and can have no idle amperage draw when nothing is plugged in. If that's important to you, confirm the USB behavior in the specs. Mount near existing USB wiring if you plan to tie into it.
Look for warm LED light and an adjustable head to direct light where you need it. Aimed or deflected light can reduce harsh, glaring light compared to wide flood styles. If glare is a concern, consider a design with a shroud or tighter beam. Note that some lights are very bright; test aim to get a comfortable reading pool.
Check the base plate size and mounting hole spacing. Some swaps are simple when the spacing matches, but smaller bases may not cover existing openings. Use a plate or escutcheon to conceal larger holes and provide solid support. Dry-fit first to confirm coverage and aim before final mounting.
Yes, a separate switch can cut power to a touch-switch light, but the light will need to be touched at the base to turn back on. If you want full on/off control from the wall, choose a light with a rocker switch instead. Verify the switch style before buying so it matches how you plan to control it.
Filters
