1. Home
2. Trailer Parts
3. Emergency Vehicle Lights
4. Whitex
5. LEDx

Hey SC, so a keel roller like the Yates #YR12000 doesn't have a weight rating because it's not meant to bear the full weight of the boat. They're only meant to protect the keel of the boat from hitting into anything on the trailer. What…

...like with the Curt # C42WR which plugs inline with the taillight connectors. Do you think this would work for you? You do have LED taillights right? Everything I found online showed that your vehicle...

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

...Yes, the correct surface mount bracket for the LumenX LED RV Dome Light part # PE65CR is the Surface Mount Bracket for LumenX part # PE76WR...

...The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light # BUL43CB or Trailer tail Light # STL55RB which are actually 4-5/16" diameter x 1-15/16" thick...

We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…

Yes. If you don't need the weight distribution bars attached to carry the trailer to storage, you can absolutely use just the WD hitch head and ball to tow the trailer. It will work just like a ball mount.

...tail lights which your dealer should be able to easily tell you. If so you will need either the LED Diodes # RO54FR or Incandescent Diodes # RO34FR to replace the standard diodes in the accessory kit...

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

Hi Tom, We do have a hitch and wiring for your 2024 Nissan Frontier, though the only wiring harness fit is a hardwire application and is not plug-and-play. For both parts here's what you'd need: - Curt Trailer Hitch Receiver #13241 - T-One…

It's not required to put your truck into tow/haul mode when using the tow tune setting of the Edge Evolution Programmer #EP59YR but it would be a good idea. The two settings will work well together. The button on your truck slightly changes the…

Hey SC, so a keel roller like the Yates #YR12000 doesn't have a weight rating because it's not meant to bear the full weight of the boat. They're only meant to protect the keel of the boat from hitting into anything on the trailer. What…

...like with the Curt # C42WR which plugs inline with the taillight connectors. Do you think this would work for you? You do have LED taillights right? Everything I found online showed that your vehicle...

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

...Yes, the correct surface mount bracket for the LumenX LED RV Dome Light part # PE65CR is the Surface Mount Bracket for LumenX part # PE76WR...

...The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light # BUL43CB or Trailer tail Light # STL55RB which are actually 4-5/16" diameter x 1-15/16" thick...

We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…

Yes. If you don't need the weight distribution bars attached to carry the trailer to storage, you can absolutely use just the WD hitch head and ball to tow the trailer. It will work just like a ball mount.

...tail lights which your dealer should be able to easily tell you. If so you will need either the LED Diodes # RO54FR or Incandescent Diodes # RO34FR to replace the standard diodes in the accessory kit...

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

Hi Tom, We do have a hitch and wiring for your 2024 Nissan Frontier, though the only wiring harness fit is a hardwire application and is not plug-and-play. For both parts here's what you'd need: - Curt Trailer Hitch Receiver #13241 - T-One…

It's not required to put your truck into tow/haul mode when using the tow tune setting of the Edge Evolution Programmer #EP59YR but it would be a good idea. The two settings will work well together. The button on your truck slightly changes the…