Clevis Hitch - 10000 lbs GTW

The mounting holes are 2 inches on center for the clevis and 3 inches on center for the mount. The clevis and side of the bracket has holes that are 0.64 inch. The top and bottom holes of the mounting bracket are 0.48 inches and the center hole is…

That is a pretty good guess! The two position mounting channel in the #T1812200 is 3-1/2" wide x 7-1/2" tall as shown in the included diagram. I included a video review of the #T1812200 for you to take a look at.

Hello Dan, thanks for reaching out. The Firestone #F2550 for the 1999 Ford F-250 2WD will be compatible with the B&W Turnoverball gooseneck hitch. The brackets are designed specifically to be compatible with in-bed hitches like the B&W, so if…

The easiest way to separate the B&W Companion, whether you have the Stationary #BWRVK3500 or the Slider #BWRVK3400, is to remove the 2 pins holding the head unit to the base and then simply lift the head off of the base. The head unit itself…

You would have to make an adapter since a 7-way female to 7-way female adapter isn't made. For wire you would need the part #DW04914-1 (sold by the foot). Then for 7-way connectors you would want the part #PK12703.

So there isn't a 6 inch hitch extender for a 2 inch hitch that has an 11,000 lb capacity and 1,200 lb tongue weight capacity, and hitch extenders also reduce the capacity of your hitch by 50 percent, so they are generally just used for…

Hey Roy! To mount 25-1/4" long springs like item #e57SR, you will want to space the Tandem-Axle Trailer Hanger Kit item #APT8 29" - 30" apart. With the equalizer being 7-3/4" and the shackle straps measuring 2-5/8" you'll…

If your truck has a 2" hitch receiver and you want to make connections with a 1" clevis pin then you can use the MaxxTow #MT70034 two-tang clevis rated for 5,000 pounds. If you need more capacity you could use the Convert-A-Ball #AMCC2…

The brake actuator that you have or purchase will state specifically what fluid you will need to use either on the cap or in the owners manual if not both. For the Hydrastar Electric Over Hydraulic Brake Actuator, #HS381-8067, you would be using DOT…

Definitely! The distance between the tangs on the Gen-Y Clevis #325-GH-039 is exactly 1.95" when measured with calipers. I went ahead and attached a diagram of this measurement for your convenience. For a hitch pin to secure the clevis to your…

Since your 2021 GMC Sierra 1500 is an AT4 model the correct Air Lift Loadlifter is the part #AL88388 and not what you mentioned as it does not fit that model.

The B&W Flatbed Adapter #BWRVK3050 will fit into any B&W Turnoverball gooseneck like the #BWGNRK1394. Depending on your truck a better option might be to use the B&W Gooseneck Hitch for Flatbeds #BWGNRK1500. It installs by welding to the…