Clevis Hitch

The mounting holes are 2 inches on center for the clevis and 3 inches on center for the mount. The clevis and side of the bracket has holes that are 0.64 inch. The top and bottom holes of the mounting bracket are 0.48 inches and the center hole is…

That is a pretty good guess! The two position mounting channel in the #T1812200 is 3-1/2" wide x 7-1/2" tall as shown in the included diagram. I included a video review of the #T1812200 for you to take a look at.

I went to the warehouse to measure the Gen-Y 2-Tang Clevis #325-GH-069 and can confirm it is 2-1/2" between the tangs. I also reached out to a representative of Gen-Y who said that the towing capacity is 21,000 lbs.

If your truck has a 2" hitch receiver and you want to make connections with a 1" clevis pin then you can use the MaxxTow #MT70034 two-tang clevis rated for 5,000 pounds. If you need more capacity you could use the Convert-A-Ball #AMCC2…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…

While drilling holes in any hitch plate like the Buyers #3371809060A will affect its integrity, I believe I have a solution for you. We do have the Hitch Plate #3371809030B which already has the holes for a Pintle #33710057 which also has a…

It sounds like you are looking for a 2-Tang clevis hitch for the 3" receiver on your vehicle. Since there is no 3" option I recommend the Gen-Y 2-Tang Clevis for 2-1/2" Hitch Receivers - 21,000 lbs #325-GH-069. Along with this clevis…

The B&W Flatbed Adapter #BWRVK3050 will fit into any B&W Turnoverball gooseneck like the #BWGNRK1394. Depending on your truck a better option might be to use the B&W Gooseneck Hitch for Flatbeds #BWGNRK1500. It installs by welding to the…

The mounting holes are exactly 2 inches on center apart on the Titan 2-Tang Clevis part #T1807800. I have attached a very helpful video that points out the measurements for you.

The answer to your question will depend on the trailer hitch receiver on your truck. From what I have found, the Rock Tamer mud flaps require minimum 1" of space in order to be able to mount them. I reached out to B&W and the distance from…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The mounting holes are 2 inches on center for the clevis and 3 inches on center for the mount. The clevis and side of the bracket has holes that are 0.64 inch. The top and bottom holes of the mounting bracket are 0.48 inches and the center hole is…

That is a pretty good guess! The two position mounting channel in the #T1812200 is 3-1/2" wide x 7-1/2" tall as shown in the included diagram. I included a video review of the #T1812200 for you to take a look at.

I went to the warehouse to measure the Gen-Y 2-Tang Clevis #325-GH-069 and can confirm it is 2-1/2" between the tangs. I also reached out to a representative of Gen-Y who said that the towing capacity is 21,000 lbs.

If your truck has a 2" hitch receiver and you want to make connections with a 1" clevis pin then you can use the MaxxTow #MT70034 two-tang clevis rated for 5,000 pounds. If you need more capacity you could use the Convert-A-Ball #AMCC2…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…

While drilling holes in any hitch plate like the Buyers #3371809060A will affect its integrity, I believe I have a solution for you. We do have the Hitch Plate #3371809030B which already has the holes for a Pintle #33710057 which also has a…

It sounds like you are looking for a 2-Tang clevis hitch for the 3" receiver on your vehicle. Since there is no 3" option I recommend the Gen-Y 2-Tang Clevis for 2-1/2" Hitch Receivers - 21,000 lbs #325-GH-069. Along with this clevis…

The B&W Flatbed Adapter #BWRVK3050 will fit into any B&W Turnoverball gooseneck like the #BWGNRK1394. Depending on your truck a better option might be to use the B&W Gooseneck Hitch for Flatbeds #BWGNRK1500. It installs by welding to the…

The mounting holes are exactly 2 inches on center apart on the Titan 2-Tang Clevis part #T1807800. I have attached a very helpful video that points out the measurements for you.

The answer to your question will depend on the trailer hitch receiver on your truck. From what I have found, the Rock Tamer mud flaps require minimum 1" of space in order to be able to mount them. I reached out to B&W and the distance from…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…