Thanks for reaching out Paul, you've asked something that I'm sure many others would like to know. You’re correct, the standard and even larger U-bolts won’t work well with your Venture trailer’s 3" x 5-1/2" aluminum I-beam. They’re…
Hey, Kevin. Thanks for another question! On the Progressive Dynamics 4000 series part #PD4060K, the jumper being referenced in the installation instructions is the metal link between the two positive DC lugs. That jumper ties the two positive lugs…
Hey Tommy, thanks for reaching out! We do have some replacement parts for the 10" Stainless Steel Kodiak Disc Brake Kit #K2R35S: - Ceramic Brake Pads w/Stainless Steel Backing Plate #K225CPSS - Kodiak 10" Stainless Steel Rotor #KR10S Were…
It sure does Andrew. You'll want the CE Smith Post-Style Guide-Ons for Boat Trailers - 60" Tall - Black - 1 Pair item #CE27646. Like the white item #CE27760, this kit comes with two 60" tall guides and fit trailer frames up to 3"…
Hello Brett, thanks for reaching out. For you I recommend the InfiniteRule Coupler Lock #IR66FR. This lock is made specifically for the Demco EZ-Latch couplers, and it will work with both the 2" and 2-5/16" ball couplers. It has a 42,000 lb…
The Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs #K2R35S will require upgrading your wheels to 14 inch. You can then use the Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 -…
Hey Joseph, since we know your Tie Down Engineering axle is a 3,500 lb axle the Kodiak Hubs part #KH84545S does fit it and the slip on Stainless Steel Slip On rotor kit part #K2R35S is also correct. This will give you a fully stainless steel setup…
Sorry for confusion but Kodiak Disc Brake Kit part #K2R35S does come with stainless steel pads and not the ceramic red pads that are seen in some pictures.
You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…
Hey Jamie. The Cast Trailer Coupler item #e88FV uses a 5/16" pin to secure it so it requires a 1/4" pin diameter lock like the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers item #IR66FR. The fixed locking point on the coupler…
I contacted Venture Trailers Inc. and found that the reason they do not recommend the use of a weight distribution system is because most weight distribution systems are not recommended for trailers with surge brakes because they do not allow the…
Hey Paul! Yes, the Norcold RV Mini Fridge w/ Built-In Freezer #NC37VR will meet your needs. This fridge is a great choice for off-grid camping. It has a latch to keep the door secure on that unlevel terrain, and will draw approximately 30-50Ah a day…
Thanks for reaching out Paul, you've asked something that I'm sure many others would like to know. You’re correct, the standard and even larger U-bolts won’t work well with your Venture trailer’s 3" x 5-1/2" aluminum I-beam. They’re…
Hey, Kevin. Thanks for another question! On the Progressive Dynamics 4000 series part #PD4060K, the jumper being referenced in the installation instructions is the metal link between the two positive DC lugs. That jumper ties the two positive lugs…
Hey Tommy, thanks for reaching out! We do have some replacement parts for the 10" Stainless Steel Kodiak Disc Brake Kit #K2R35S: - Ceramic Brake Pads w/Stainless Steel Backing Plate #K225CPSS - Kodiak 10" Stainless Steel Rotor #KR10S Were…
It sure does Andrew. You'll want the CE Smith Post-Style Guide-Ons for Boat Trailers - 60" Tall - Black - 1 Pair item #CE27646. Like the white item #CE27760, this kit comes with two 60" tall guides and fit trailer frames up to 3"…
Hello Brett, thanks for reaching out. For you I recommend the InfiniteRule Coupler Lock #IR66FR. This lock is made specifically for the Demco EZ-Latch couplers, and it will work with both the 2" and 2-5/16" ball couplers. It has a 42,000 lb…
The Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs #K2R35S will require upgrading your wheels to 14 inch. You can then use the Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 -…
Hey Joseph, since we know your Tie Down Engineering axle is a 3,500 lb axle the Kodiak Hubs part #KH84545S does fit it and the slip on Stainless Steel Slip On rotor kit part #K2R35S is also correct. This will give you a fully stainless steel setup…
Sorry for confusion but Kodiak Disc Brake Kit part #K2R35S does come with stainless steel pads and not the ceramic red pads that are seen in some pictures.
You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…
Hey Jamie. The Cast Trailer Coupler item #e88FV uses a 5/16" pin to secure it so it requires a 1/4" pin diameter lock like the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers item #IR66FR. The fixed locking point on the coupler…
I contacted Venture Trailers Inc. and found that the reason they do not recommend the use of a weight distribution system is because most weight distribution systems are not recommended for trailers with surge brakes because they do not allow the…
Hey Paul! Yes, the Norcold RV Mini Fridge w/ Built-In Freezer #NC37VR will meet your needs. This fridge is a great choice for off-grid camping. It has a latch to keep the door secure on that unlevel terrain, and will draw approximately 30-50Ah a day…
Red boat flags are a bold choice for those looking to make a statement on the water. With vibrant colors and durable materials, these flags are perfect for adding a touch of personality to your vessel. Whether you're marking your territory at a campsite or simply enjoying a day on the water, these flags are both fun and functional.
Red boat flags are crafted from materials that offer decent durability, ensuring they withstand various weather conditions. While some flags may only display the image on one side, the vibrant red color remains eye-catching. With proper care, including following included instructions, these flags can last beyond a single season.
The bright red color of these flags ensures they are highly visible from a distance, making them ideal for marking your spot or signaling on the water. The bold hue stands out against the natural backdrop, ensuring your flag is easily noticed by fellow boaters or campers.
Red boat flags are versatile and can be used for a variety of purposes. They are perfect for marking your campsite, adding a decorative touch to your boat, or signaling to others on the water. Their vibrant color and fun design make them a popular choice for both practical and aesthetic uses.
Many red boat flags come with simple instructions to help extend their lifespan. While some may have images that are only readable on one side, the overall construction is designed to be sturdy and reliable. These features ensure that your flag remains a vibrant and functional addition to your boating gear.
Red boat flags offer a balance between quality and affordability. While some may find the material to be of basic quality, the price point often reflects this, making them an accessible option for many. Despite this, the vibrant color and fun design make them a worthwhile addition to any boating adventure.
Filters
