2026 Ford Mustang Bug Shield

Hey Matt, welcome back! The Installation Bolt Kit for 5th Wheel Pin Boxes and 5th Wheel to Gooseneck Adapters item #GY86FR uses twelve 5/8" Grade 8 bolts that should be tightened to 160 ft-lbs. This kit is exactly what you need to install the…

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

Hey Mike, thanks for reaching out. Yes, it will! The Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR will match right up with the Curt No-Drill Bracket #C57202. You won't have to drill any new holes. The picture I included shows…

Hey Dennis, thanks for reaching out. Yes we do have a braket for attaching the 4-flat plug to the car. For that I recommend the following: - Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR What most people do it use self-tapping screws…

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

Hey Ian! Yes, the Aluminum Eagle Trailer Wheel #LH77VR will be able to run those 14 ply tires. This comes with a metal valve stem rated up to 150 psi so 110 psi won't be an issue. Are you upgrading the wheels on your 2013 Redwood 5th wheel?

Hi Clint! I do have a couple center caps that I think will look nice on this tire/wheel combo, but the Goodyear Endurance ST205/75R14 Radial Tire w/ 14" Eagle Aluminum Wheel - 5 on 4-1/2 - LR D #GY57QB does not have any included with it. So with…

Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…

Hey Ralph, the Putco Window Visors part #P45QR that you referenced are in-channel mount like you asked about.

Hey Keith, yes the Reese Ford puck adapter part #RP30156 that you referenced is what you would need. This fits the OEM pucks of your 2019 Ford F-450 and also provides the type of rails that your Pullrite ISR hitch is designed to fit so it work…

Hello Ric, Thanks for writing in. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C46DR is a great fit for your 2026 Nissan Pathfinder, and it will work just fine with the spare tire mounted underneath the vehicle. For…

Hey Rob, congrats on the new SUV. To add a hitch to your 2026 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit for your Pilot and comes with all hardware necessary for installation. The etrailer item #e27KR is a class III…