bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. 4 Flat
  4. No Tow Package
  5. Trailer Hitch Wiring
  6. Vehicle End Connector
THIS ITEM IS NOT A FIT FOR
2014 Subaru Outback Wagon
Tekonsha

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

$28.30
Custom Fit Vehicle Wiring
Not Confirmed to Fit

2014 Subaru Outback Wagon

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118344 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (159)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring

  • 4 Flat
  • No Tow Package
  • Trailer Hitch Wiring
  • Vehicle End Connector
  • Plug-In
  • Tekonsha
  • Plug and Lead
  • No Converter
  • Hidden

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove either the tail light assemblies or interior trim panels to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed either in the jack storage compartment of your cargo area or beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure if you are mounting it near the hitch.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118344 Tow Ready T-1 T-Connector - 4 Wire

Item # 118344

Installation Details 118344 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

159 reviews
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

by:

Fast shipping and good product.



by:

Installed easy works good no problem



by:

Works great easy to install



by:
2000 Ford Ranger

Simple Installation !



by:

very quick delivery&very good products



by:

Nice product,easy install also Great Price!!!!!!!!!



by:

Simple plug and play operation, fast shipping. A+



by:
2000 Ford Van

Good price and a true plug in product. Instruction very clear. Installed on 2000 Ford Van.



by:
Ford F-150

Purchased a wiring harness for my F150. Installed perfectly. Fast courteous service.



by:
2002 Ford Ranger

excellant product a snap to install. 15 minutes after I received it I had it installed and ready to go.



by:

Everything I ordered came in one large box as requested and fit like a glove the instructions were not for my car though but the hitch was pretty easy to install with no instructions



by:
2000 Ford Van

OK, had to do some modifications to the install plan, quess this was because this van does not have a rear door molding strip, but again, well worth the cost for the harness, and was easy to install.



by:
2002 Ford Ranger

The hitch was better than I could have imagined. It was easy to install, the installation parts were all there and the wiring was easy. I installed it in less than one hour and that included one beer during the installation



by:

Pleasently pleased!I bought this product for future (1 month) installation in an used van that I purchased. I received the product in a fantastically short period of time. I am very impressed with the quality of the workmanship and materials. The .pdf instruction sheet is a definite plus.



by:

Can't be any easier, Installed in less than 20 minutes. Website was easy to navigate. Onlne 'how to' video great! I will "Bookmark" etrailer as the. Go to site. Thanks guy. Job well done. Mark V



by:
2001 Ford Focus

The wiring harness was a cinch to install, it went in exactly as the instrutions said. I am very happy that I bought the pre-wired harness, there was no guess work and it took me about 40 minutes to install.



by:
2003 Ford Ranger

Purchased a trailer wiring harness for my 03 Ranger at about 5 in the evening, received an email at 9 saying that it had shipped. Received my product about 2 days after the purchase. Great shipping time, and awesome customer service. I will definitely be using etrailer again!



by:
2001 Ford Focus

The simplicity to this application in comparison to the old days of wiring a trailer is just incredible! Plug in and go, who'd have thought! Awesome product, speedy shipping and easy installation! Thank you.



by:
2000 Mercedes E-250

Product was easy to find on the website, good price, fast delivery and snapped right in. Actually I was just here to find a couple of receiver hitches that will fit Ford E250 vans and this wiring harness was recommended on the same page. Much better than my last hack-job trying to wire in trailer lights myself.

I am pleased.



by:
1999 Ford F-150

I ordered a T-One Wiring Harness with 4 Pole Trailer Connector for a 1999 Ford F-150 late on a Friday. I received confirmation of my order and notice of shipment the same night. The wiring harness was received Monday and installed the same day. Two day turnaround on my order was fantastic. The instructions made installation easy. eTrailer.com knows what good customer service is all about. I will certainly recommend them in the future.



by:
2001 Ford Explorer

this kit came extremely fast. I ordered on the weekend and had it in my hand by mid-week. although my vehicle was not named in the instructions specifically, it was still not hard to install. It took longer to route the wires under the plastic trim than anything else. My Ford is 10 years old so sometimes things don't always go right. but this kit worked perfectly. Took about 20 minutes. I highly recommend Etrailer.



by:
1997 Ford Aerostar

As usual with Etrailer I got exactly what I needed at a great price. Directions were the only bad part of this wiring harness as they werent very well written. Thankfully it was a pretty straightforward process and I had it installed within an hour



by:
2003 Ford Ranger

Very easy to install on my 2003 Ford Ranger. Much simpler fix than trying to track down the problem with the factory harness.



by:
2001 ford F-150

Little modification needed for a 2001 F150. Works great. Took around 55minutes from start to finish with little modifications to the plastic connection.



by:
1998 Ford Van

Product arrived very quickly and was very easy to install. I was absolutely dreading wiring the trailer little on this van and this harness made the job very simple!

Rusty profile picture

Rusty

7/12/2022

Been a year and the lights are still working like a charm! I highly recommend this product!


25
159
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Do You Have a Hitch and Trailer Wiring for My 2003 Ford E-450 RV Cutaway Ex Ambulance?
    Hello Carla, We have the perfect fit for you, the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41945 is confirmed to fit your E-450 RV Cutaway. You will need to remove the back step in order to have a hitch back there. If you need some wiring to pair with it, you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344, this will get a 4 flat on the back. If you are looking to tow something with brakes you will...
    view full answer...
  • 2001 Ford F-150 Trailer Hitch Needed with a 700 lbs Tongue Weight and Fits with Spare Tire
    The Draw-Tite Trailer Hitch Receiver # 37130 is a Class IV trailer hitch with a 2" receiver opening that is confirmed to fit your 2001 Ford F-150 and will allow you to keep your full spare in it's current location. This has a 7,000 lbs Gross Towing Weight (GTW) rating and a 700 lbs Tongue Weight (TW) rating. When used in conjunction with a Weight Distribution (WD) system those ratings are bumped up to 12,000 lbs GTW and 1,200 lbs TW. I have attached the installation details for you to...
    view full answer...
  • Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1995 Ford E-250
    For your 1995 Ford E250 Van, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" # 41906. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13322 will not fit your vehicle. If you will be towing with this hitch receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344. This harness will install to your factory wiring behind each of your tail lights. You will need to remove either the tail light assemblies...
    view full answer...
  • 4-Pole Trailer Wiring Harness for 1995 FORD E-350 7.3L Turbo Diesel Cutaway Van
    The 4-pole trailer wiring harness we offer for a 1995 Ford Van is part # 118344, however this particular wiring harness is designed to plug inline at the connection between the OEM tail light assembly and the manufacturers wiring harness. Unless your cutaway van chassis uses the OEM Ford van taillights, which is doubtful, this harness will not work for you. Assuming that your cutaway uses a combined lighting system that carries the turn signals and brake light signal on a singe circuit...
    view full answer...
  • Recommended Towing Package For A 2004 Ford F-150 Heritage Series
    When it comes to installing a towing package on your 2004 Ford F-150 Heritage Series there is a few things you will need. First the trailer hitch. If you have a standard bed model Ford or the step side model Ford The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75740 is confirmed for your vehicle. This trailer hitch has an easy, bolt-on installation with no welding required. It has a black powder coat finish that covers an e-coat base for superior rust...
    view full answer...
  • Does A Brake Controller Wire Harness Need An Inline Fuse On The Brake Output Wire To The 7-Way
    Hey Rick, The 7-Way connector # ETBC7 would need an inline fuse on the power wire running to the battery and the brake controller # 90885 would also have an inline fuse on it's power wire to the battery. The # ETBC7 comes with a 20a, 30a, and 40a circuit breaker for this purpose. If you're starting from scratch on your 2000 Ford Van then you'll want to first install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344 you were looking at. From there you can start...
    view full answer...
  • Parts Needed to Install a Brake Controller on a 1998 Winnebago Minni Winnie
    Hey Ed, thanks for reaching out! It sounds like your 1998 Minni Winnie doesn't have any trailer wiring at all so you'll need the following: - T-One Wiring # 118344 - Universal Wiring Upgrade # ETBC7 - Tekonsha Voyager iD Brake Controller # TK26BR We don't really have any installation videos on an RV like that, but I've attached a video of the ETBC7 kit that should help with the installation. Is there anything else you're needing to install along with this stuff?
    view full answer...
  • How To Install a 7-Way Trailer Connector On a 2001 Ford E-350
    I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118344 which is entirely plug an play. This can then be easily adapted to a 7-way using a 4 to 7-way adapter like the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. That said, you will need extra wires...
    view full answer...
  • Brake Controller Installation on 2001 Ford E350 Van
    Brake controllers like the # C49UR Curt Assure aren't a vehicle-specific item. You can install a brake controller on just about any vehicle. What the installation will involve will depend on whether your E350 is equipped with a trailer connector and what type it is. If you have the factory 7-way trailer connector, it'll be a plug-and-play installation using the # C51322 brake controller harness. The harness plugs in to the connector under the dash near the e-brake pedal (see provided...
    view full answer...
    Image 1 for
  • Installing Brake Controller on 2002 Ford E-450
    As long as your 2002 Ford E-450 chassis is equipped with a factory 7-Way or 4-Way at the rear bumper then there should be a brake controller plug-in port behind the dash to the right of the steering column. If this is the case on your E-450 then to install a controller like the excellent Tekonsha Prodigy P3 # 90195, you will use the Plug-In Harness # 3035-P. One end of the adapter will plug into the brake controller itself and the other end will plug into the factory port behind the dash....
    view full answer...
  • Adding a Brake Controller and 7-Way to a 2000 Ford Econoline 150 with 4-Way Flat Connector
    The blue output wire to the trailer brakes on your 2000 Ford Van will need to be manually run from the brake controller back to the plug in the rear. The brake controller power supply and brake pedal wires are already run. Since your Van has a 4-Way you will just need # 37185 to add a 7-Way and enough wire, # 10-1-1, sold by the foot, to go from the brake controller, through the firewall, under the van, to the blue wire on 37185. When routing the wire avoid areas that could pinch or burn...
    view full answer...
  • Installing a Brake Controller on a 2003 Ford F-150 Without a Factory Trailer Connector
    I can certainly outline the procedure for hardwiring a brake controller on your 2003 Ford F-150. You will need three things. First, a brake controller. I recommend the Tekonsha P2 Proportional Brake Controller, # 90885. This is one of our best selling and highest rated brake controllers. You will also need the # 3035-P wiring harness specific to your truck. Next, you will need Adapter 4 Pole to 7 Pole and 4 Pole, # 37185 which will provide you with a 4-Way and 7-way connection at the rear...
    view full answer...
  • Brake Controller and Install Recommend for a 2003 Ford E-350 Van
    If you have a factory 7-way at the rear of your 2003 Ford E-350 all you would need to install our most popular brake controller the Prodigy P2 Brake Controller part # 90885 is the wiring adapter part # 3035-P. If you don't have any trailer you would need to start with a 4-way. For that I would recommend the Tow Ready Harness part # 118344. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2003 Ford E-350 with Step Bumper
    For your 2003 Ford E-350 with a step bumper, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75703 will fit well. I've attached a photo of a step bumper fit to assist. I've also attached a video install of a this hitch to assist with the installation which will be the same with the step bumper. If you do not yet have trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344 which will install to a harness...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Wiring Harness for 2001 Ford Expedition with Square Connector
    The Tekonsha trailer wiring harness part # 118344 is the correct trailer wiring harness that fits your 2001 Ford Expedition and matches your picture.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch And Wiring Harness For 2001 Ford E-450 Shuttle Bus
    The trailer hitch I recommend for your E-450 shuttle bus is the Curt Adjustable Width Trailer Hitch Receiver, part # 13703. This is a Class lll hitch and it has a 2-inch receiver opening. The hitch is adjustable for frames from 22 to 72 inches wide. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
    view full answer...
  • Trailer Hitch and Wiring for a 2000 Ford Excursion
    The 2000 Ford Excursion is actually rated for 10,000 pounds gross trailer weight. The 18,000 pounds is the gross combined weight rating or GCWR. The GCWR is the most that the Excursion and trailer can weigh including cargo, passengers, and fuel. So the Excursion cannot tow 18,000 pounds and its weight plus the trailers weight cannot exceed 18,000 pounds. The trailer can weigh up to 10,000 pounds total but no more. With that said the highest capacity trailer hitch we have for your vehicle...
    view full answer...
  • Brake Controller Installation on 1998 Ford E350 Van
    The procedure for installing a brake controller in your van will depend on what (if any) trailer connector is on the vehicle. If the van has the factory installed 7-way or 4-way connector, there will be a port under the dash for installing a brake controller. You will need the brake controller wiring adapter, part # 3035-S. The adapter would wire color for color to the brake controller, and would then plug into the port under the dash. If the van has the 4-way connector, the port under...
    view full answer...
  • Recommended Hitch for my 2002 Ford E450 Cutaway
    I am also unable to find any hitch that matches those center to center attachment points. In this case the Curt Adjustable Trailer Hitch Receiver part # C13701 will allow you to custom fit the hitch to the frame and get you back and ready to haul. If you do not have trailer wiring the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118344 will do a great job and is custom fit for your Ford E-450 van so there will be no need to cut or splice your factory...
    view full answer...
  • Parts Needed to Install a Trailer Brake Controller on a 1999 Ford E-350 Econoline Van
    In order to install a brake controller on your 1999 Ford E-350, the first thing you are going to need is a 4-Way trailer connector # 118344. I have included a link to the isntallation instructions for you to view. Next you will need a 4 and 7-Way installation kit # ETBC7. This will provide the 7-Way, while retaining the use of the 4-Way, and all of the wiring needed to install the brake controller. I have included some links that will explain the ETBC7 installation for you. And finally...
    view full answer...
  • Parts Needed to Convert Disk Brakes to Electric Over Hydraulic on EZ Loader Boat Trailer
    To convert the surge disk brakes on your 2014 EZ Loader Boat Trailer to electric over hydraulic brakes, you will just need a few things. First you will need an electric brake controller that is compatible with electric over hydraulic brakes. For your 2003 Ford Ranger, I recommend the Tekonsha Prodigy P2 # 90885. This is a proportional brake controller with digital display that will receive the signal from your vehicle's brakes and send it to the trailer's actuator. It will be mounted...
    view full answer...
  • Trailer Hitch Recommendation for 2004 Ford F150
    2004 was a split model year for the Ford F150. Two F150 models were offered, the Heritage which was the rounded body style like the 2003 model or the new body style, like the 2005 model. The hitch you need will depend on which body style your truck is. If you have the new body style, I'd recommend the Draw-Tite Class III hitch, part # 41549. Some of the new body trucks had a vibration dampener at the rear of the vehicle. The hitch includes a bracket that lets the vibration dampener be...
    view full answer...
  • Wiring Harness That Will Fit 1998 Ford E-350 Econoline Without Factory Connector
    To add a 4-way to your 1998 Ford E-350 Econoline that does not have the factory tow package, all you need to do is add the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344, which uses plug-in connectors that you will install behind the van's taillights. I'm not quite sure what you are referring to in regards to a round trailer plug, as that would only be needed if you were using trailer brakes. Without brakes you will only need the lighting functions of the 4-way,...
    view full answer...
  • Adding a 4- and 7-Way Trailer Connector to a 1999 Ford E-150 Van
    To add a 4- and 7-Way trailer connector to your 1999 Ford Van you will first install a 4-Way such as # 118344. Then, with the 4-Way installed you can install # ETBC7 to add a 7-Way and retain the 4-Way. I have included some links that show and explain the ETBC7 installation for you. These links also cover the installation of a brake controller. For a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable.
    view full answer...


< Previous
123. . .10



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Chris R
Video Edited:
Chris R

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<