Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Diode kit allows you to use your Jeep Patriot's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.
Features:
Specs:
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
Average Customer Rating: 4.8 out of 5 stars (1268 Customer Reviews)
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.Very complete kit. My only problem mounting it in a 2014 Chevy Spark is the limited space for the diodes. After much trial and fitting I found a suitable location. See photo.
This item was recommended by Jameson once he saw what I was planning to order for the tow bars and brake system. It was installed by a shop on the etrailer authorized installers list, along with everything else for the entire towing system. It does attach to both vehicles just fine, although at first I wasn't sure it was fully attached on the motorhome side. I was afraid it would just slide back out, but it hasn't.
Finished wiring and first effort to plug in red flex coil to the Jeep and the outside protection cover broke apart; very disappointing. Trying to contact Etrailer for replacement.
Haven't installed it yet, but the kit seems to include everything I need. My contact at etrailer did a great job of getting me exactly the right parts to complete my flat tow package, and the videos available on the web site to help with installation are a great feature. I don't think I would tackle this installation myself without all of the helpful information these folks provide.
Jenny N.
4/13/2024
Thank you for reaching out! I would love to see pictures and how your trip went once it is installed. Happy Trails Gary.
This seemed unnecessary but is really the only proper solution when working with LED taillights. It works perfectly.
This kit worked out well. It contained everything needed to tap into my vehicles lights and continues to be trouble free after a year of use.
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
The wiring kit does what it is supposed to do. I would like to see all of the terminal connections to be the marine grade heat shrink type with the solder inside. The type that join the wires with a heat-gun. I installed this in a 2024 GMC Sierra Denali 1500. I chose to mount the connector by drilling an hole through the plastic front license plate. This will be covered with a flip-up license plate frame. All-in-all, I would purchase this set again.
The video instructions made this harness very easy to install (other than routing the wire to the back of the Jeep). Everything functions as it should. I'm very happy I went with this harness versus magnetic lighting.
I have to say : E trailer always delivers !
This is exactly what ya need if you are adding a second vehicle or swapping your old system to a new rig. I could have gotten by without the plug but for the price decided I should get a spare.
Delivery was prompt and product was exactly as described.
great complete wiring kit for my 2014 gmc sierra 1500
Michael
2/2/2024
flawless
We added this kit and tow cable to keep our Jeep battery charged while towing, so the supplemental brake could stay powered. It has worked well for us for several long trips from GA to NH and MI. The Jeep side of the tow cable ended up with a crack in the metal plug, but we were able to get a replacement plug and rewire it pretty easily. We are going to complete the wiring for the tail lights before our next trip.
Installed as per video...I had a local car/truck accessory shop install mind as way too many facial screws for me to content with. $400 to have it done right.
(A little worried that if I get too close to a vehicle or wall that some damage my occur as cable connector and braking wiring sticks out 3-4 inches from front of car.) My older system was cleaner design across the front of the car.
Easy to install with great instructions provided.
My Roadmaster Sterling tow bar has a channel for the wiring kit to run through. the coiled wire is not easy to work with on this bar if you want it to run through the channel. 10 months into using it the 6 wire end disintegrated and had to be replaced. luckily we were camped right beside a Camping World.
The best customer service. The really know all about rv accessories
A bit of a learning curve for first time dyi on this type of thing. Key is to make sure you figure out what type of brake light systems you have. There are 2 types and 2 different wiring diagrams. Read directions thoroughly. Works well. 2009 dodge 2500 install
Works as advertised. Installation takes some time but instructions were very good. No complaints.
Rob
12/14/2023
Still working fine.
Works good. Reasonably easy to install. The diodes are large and you have to get them 'just so' behind the tail lamp assemblies to get the lights to seat properly.
I have had no problems with wiring kit. it works well on my Ranger'
Just wanted everyone to know, that after one year of owning and using the Roadmaster towing baseplate, and the wiring harness for my 2022 Ford Maverick, I have accumulated over 10,000 miles of trouble free towing behind my Motorhome. The folks at etrailer did a great job making sure I had the right parts and at a good price. Delivery of the parts was exactly the day it was promised. I highly recommend them when need these kind of parts. I really appreciated the great and friendly service!! Safe travels
Shawnee provided excellent service on the phone order, delivery was prompt and the installation videos were excellent!
The roadmaster connection kit for our brake system on our toad has worked perfectly.
Project went as expected. I did purchase additional split loom from Harbor Freight to protect the wires from the front to the rear of my truck. It easily ran inside the frame rails!
excellent kit and installation video
Do you have a question about this Tow Bar Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dale
4/17/2024
System has worked great on several trips in the last year. Including a 5,407 mile trip out west.