Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Dutton-Lainson industrial winch is designed for heavy-duty vertical lifting operations. Crank handle clockwise to lift the load, counter-clockwise to lower the load. Automatic brake stops the load when hand cranking stops.
Features:
Specs:
| Brake Winch Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Model | Rated Capacity | Min. Operating Load Required | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (3) | Max. Drum Capacity - Strap |
| DL10786 | 2,500 lb.(1) | 300 lb. | 1-5/16" | 12:1 | 12-1/4" | 180.9 | 5/16" x 51' | - |
(1) Capacity is based on direct line pull on the third layer of line on drum. Capacity is reduced as line builds up on drum.(3) Drum capacity based on cable size listed. (Cable is not included.) B Series winches will only work with cables. They are not strap adaptable. | ||||||||
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
Ratings & Reviews

Katrina D.
11/18/2023
Here is the link to the owner’s manual for this winch. Page 3 has maintenance instructions that should be helpful. https://www.dutton-lainson.com/assets/pdf/owner-manuals/206168.pdf

Dave K.
7/17/2026
Winch is great absolutly strong. I went with an oversize model to get a lower gear ratio which makes raising my boat much easier to lift. I think this winch will outlast me.

Kate F.
1/28/2026
In this world you definitely get what you pay for, glad you got one that is going to last Lawrence! Transporting safes by boat, very interesting job. I am curious to where you are delivering them to? An island, other boats, houses on the lake?
Do you have a question about this Trailer Winch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Sierra K.
11/4/2021
The spring that is intended to go onto the end of the drive shaft may have been placed onto the shaft before the handle was threaded onto the winch. The spring, spacer and flat washer must be in place on the end of the drive shaft. If the spring is not present in this location, it was probably placed on the shaft before the handle was installed.