Peterson Trailer Tail Light w/ Stainless Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens

Peterson Trailer Tail Light w/ Stainless Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens

Item # 429800

lowest price pledge

Our Price: $18.63

Trailer Lights

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.52 lbs

Quantity: 
In Stock
429800 - Incandescent Light Peterson Tail Lights
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Tail Lights
  • Round
  • Incandescent Light
  • Red
  • Recessed Mount
  • 4 Inch Diameter
  • Non-Submersible Lights
  • Peterson
  • Stop/Turn/Tail
  • Rear Reflector
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable stainless-steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb. Lowest Prices for the best trailer lights from Peterson. Peterson Trailer Tail Light w/ Stainless Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens part number 429800 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (8)
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

Peterson Trailer Lights - 429800

5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable stainless-steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.


Features:

  • Combination trailer tail light serves 3 functions when properly mounted
    • Stop light
    • Tail light
    • Turn signal light
  • Vibar socket absorbs road shock and vibration to prolong bulb life
  • Incandescent bulb can be easily replaced
  • Durable stainless-steel housing with retaining ring protects light
  • Red lens over incandescent bulb
  • Compatible with 12V DC systems
  • Flush mount with built-in mounting flange
    • Requires 4-1/2" diameter hole for installation
  • 2-Wire design includes power leads - grounds through mounting stud
  • DOT compliant
  • Made in the USA


Specs:

  • Dimensions: 5-1/2" diameter x 1-5/8" thick
    • Light face dimensions: 4" diameter
  • Distance between mounting holes (center on center): 4-1/4"
  • Bulb type: 1157
  • Power draw at 12.8V: 2.2 amps
  • 1-Year limited warranty


Manufacturer Cross Reference

Light will work as an exact replacement for:

Grote # 50232

Truck Lite # 40058R

Optronics # ST40RB


Peterson 425S Flush Mount Round Tail Light Dimensions

Recessed-Mount Light

Recessed Grommet Mount Trailer Light Installation Diagram

Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.



M425S Peterson Trailer Tail Light w/ Stainless Steel Housing - Stop, Turn, Tail - Incandescent - Round - Flush Mount - Red Lens






California residents: click here


Video of Peterson Trailer Tail Light w/ Stainless Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Peterson Trailer Lights - Tail Lights - 429800 Review

Today we're going to be taking a look at part number 429800. This is the Peterson Round Red Trailer Taillight. This taillight is going to provide your stop, turn, and taillight functions. It is designed to be a flush mountain design. You can see that we have the nice mounting flange that's going to contain 3 mounting holes. That's going to need to be mounted in a hole with a diameter of 4 and a half inches, so measuring from this point here to this point here.

Up closer to the flange, so right here to the same point on the other side. That's going to give us a measurement of about 4 and a half inches. That tells us the size of hole that this would actually mount into. We're going to have a stainless steel housing. We're going to have the reflector built into the lens on the light. That goes right around the perimeter there.

This is going to feature a 2 wire design. You're going to have your red wire for your stop and turn signal. Brown wire for your power for the taillights or running lights. Then the units designed to ground through the mounting hardware. Now your mounting hardware's not included, that is going to be sold separately but it grounds through the mounting hardware.

It's going to use a snap ring or retaining ring to hold the lens in place. That's really easy to remove, I just push a screwdriver in there and then you can pry it a little bit just to take the tension off. That's going to remove and then that's going to allow the lens and the gasket to fall out. That's going to allow you to gain access to the inside right here in case you ever need to change the bulb. This is going to use bulb 1157, it's going to sit in a brass socket so it's easily replaceable if needed. Then to get this reinstalled simply just place the gasket back down in there, place the lens on top.

Then we'll take our ring, squeeze it together until we get it to fit back inside, it will snap into place. Pretty simple, again the bulb is going to sit in that brass socket. The light itself is SAE and Department of Transportation compliant. If we take that diameter measurement of just the light, measuring basically just the lens, we're looking at about a 4 inch measurement. Outer diameter from outer edge to outer edge is going to be about 5 and a half inches. The depth on the light from very back to very front, you're looking at about 1 and 5/8ths of an inch. Then, again, it's going to contain 3 mounting holes. The distance that we have between our mounting holes measuring on center, that's going to give us a measurement of 4 and 1/4 of an inch. That should be the same for each set, so center on center, 4 and 1/4. Now we're going to go and hook this up to our external power that way you can see what the light looks like when it's turned on. We'll also be able to turn off our overhead light so you can see in a low light setting. Here you can see the light has got a nice consistent signal. This is going to be the taillight or running light function of the light. Then when we apply our brakes you can see how that illuminates for a brighter signal output. Then when we activate our turn signals it's going to do that same thing just in increments. That's going to do it for today's look at part number 429800.


Customer Reviews

Peterson Trailer Tail Light w/ Stainless Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens - 429800

Average Customer Rating:  5.0 out of 5 stars   (8 Customer Reviews)

5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable stainless-steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.

- 429800
by:

good quality.rust free after 1 year out side 565647



- 429800
by:

One year later and the taillight still works like new. Pulled the horse trailer from Texas to Minnesota and back. No issues. Great product and the installation was easy. 564026



- 429800
by:

Just what I needed, thanks. 528104


Comments

fine

Curtis D - 06/29/2019

57246

- 429800
by:

This purchase was to replace original equipment lights that became rusted after two years of use. These replacement lights show no rust and have been operationally trouble-free in a salt-air environment since I installed them. They are 5 star quality and inexpensive. Mine still look new. 346810



- 429800
by:

great product. came on time. 261412


Comments

Still looking good and working nicely despite sitting out in weather.

cheryl - 01/18/2018

33264

- 429800
by:

The product was exactly what I wanted. 179216



- 429800
by:

Exactly matches the original. Customer service, communications and fast shipping 114512



- 429800
by:

Peterson trailer lights installed Photos of peterson lights installed on trailer 4836


8
8

Ask the Experts about this Peterson Trailer Lights

Do you have a question about this Trailer Light?



Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Brian T
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.