Arrives before Christmas 
Replacement city water inlet solves your problem with a broken, leaky check valve. Recessed flange keeps cap from protruding past your RV wall. Uses a 1/2" brass FPT connection, and includes adapter to create a 1/2" MPT connection.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra Water Inlet for RV's. This unit features a metal recessed flange with a powdered coated paint finish. It's colonial white in color. It's made from a completely lead free design. Here on the back, it's going to use a half inch female pipe for it inside connection. It does feature a brass check valve. Here at the center on the front, you're going to notice that it has the garden hose swivel fitting and that does have a gripper on it, so it does make connecting and disconnecting quick and easy.
It's going to come with the press in desk plug, and a built in screen that's going to keep dirt and grime out of that area. It's also going to feature internal seals to offer leak proof performance. It's a really nice tight, secure fit with a push in dust plug. Here on the table, you're going to see what it comes with. It's going to come with some installation putty tape. It's going to come with pipe thread tape.
It's going to come with you're mounting screws. It only requires 3 screws to get it installed. The screw heads are painted to match the color of the housing, and it's also going to come with a male nipple to convert the connection point at the back. This unit does conform with federal and state laws from drinking water fixtures, drinking water safety. When we take a look at the overall diameter, it's going to be 4 and 5 8ths of an inch and then our mount holes are separated on center by 3 and 9 16ths of an inch. That going to be the same separation between each mount hole center on center. That's going to do it for today's look at the Valterra Water Inlet for RV's..
Average Customer Rating: 4.7 out of 5 stars (11 Customer Reviews)
Replacement city water inlet solves your problem with a broken, leaky check valve. Recessed flange keeps cap from protruding past your RV wall. Uses a 1/2" brass FPT connection, and includes adapter to create a 1/2" MPT connection.Installed today and it looks great. It was easy to replace the old intake and I wish I would have done it sooner.
Nice solid build part
Although I haven't been able to replace the old one yet. I know from past experience everything will work out fine. Great Company, Friendly CSR and very helpful
Reesa answered the phone on a Sunday, I made my order and the part was here in 3 days. It fits and works as described. I’m satisfied
I haven’t installed it yet, but it’s just what I needed. Thank you for your fast service.
Perfect!
Do you have a question about this RV Water Inlet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.