ONE LED Trailer Tail Light: The Breakdown Video

We do have the passenger side Optronics ONE Series LED lamp. The part #is STL008RB.

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

I went out into our warehouse and measured a Stainless License Plate Frame #CR21110 that we had in stock and found that it measured 12-3/8 inches by 6-1/2 inches.

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…

The recommended 2 inch Euro style ball mount for Curt trailer hitch #C11352 on a 2015 Nissan Altima is #C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it…

The Curt Trailer Hitch Receiver #C12173 is only available with a 1-1/4" receiver tube on your 2018 Buick Regal TourX. You can use a Curt Trailer Hitch Receiver Adapter #C45785 to allow you to still use your 2" hitch mounted accessories. The…

Hey Doug! The closest thing we have to what you're asking for is the 1-1/4" to 2" Trailer Hitch Adapter item #e93YR. This has a 5" rise and most likely won't work for your Camry for the same reason what you're asking for…

We have just what you are looking for. I recommend the LED Submersible Trailer Stop, Turn and Tail Light, part #STL8RB. This is for the right side of the trailer and is a stud mounted LED light. It has the side marker light that illuminates when the…

There is a slight difference in dimensions, width. The #CT-3001-Z has a channel width of 2" and the #CT-3002-Z has a channel width of 2-1/2".

If you are looking at and LED Trailer Tail Light like part #STL8RB, then you will not need a converter to make it compatible with the 4-Way Wiring Harness on your truck. You will need to figure out the wiring on your trailer to make sure that you get…

LED bulbs have little resistance on their own, so when used with turn signals they can create a hyper flash situation, which is a fast flashing of the bulb. To determine if you will need a load-resistor kit like a LED Light Bulb Load-Resistor Kit…