Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Best Hitch For 2010 Honda Accord Crosstour For A Bike Rack
  The Curt Hitch part # C11002 is a custom fit for your 2010 Honda Accord Crosstour and it is your best option for the use of a bike rack. The Curt Hitch gives you a little over 3 inches more ground clearance then the Draw-Tite version for this vehicle so the bike rack is less likely to drag the ground if you are ever in a low ground clearance situation. I recommend the Class I compatible Thule Camber 2 part # TH9058 for your Class I hitch because it only weighs 28lbs so it is very easy...
  view full answer...
  
• Recommendations for Hitch to Use Bike Rack on 2011 Honda Accord 4 Door Sedan
  All of the hitches available for your 2011 Honda Accord 4-Door Sedan are a Class I 1-1/4 inch size. You will want to make sure the bike rack you use is designed to fit a Class I 1-1/4 inch hitch. A Class I hitch will only accept Class I rated accessories. I am including a link to a FAQ page on hitch sizes and different class ratings. It will describe the difference in the Class I rated hitch. The Curt Class I 1-1/4 Inch Hitch, part # 11002, you have mentioned will not fit your Accord....
  view full answer...
• Can a 2015 V6 AWD Honda Crosstour Tow 2 Snowmobiles
  As long as the gross trailer weight is under the 1,500 pound capacity and the tongue weight is under the 150 pound capacity of the 2015 Honda Crosstour then you will be good to go as far as occasionally towing the trailer. If the trailer is heavier than the capacity of the vehicle I can't recommend towing it. The suspension would be fine because if the trailer is within the capacity of the vehicle then the tongue weight would be just 150 pounds which it should not have a problem handling...
  view full answer...
• Can I Use My Older Thule Vertex XT Bike Rack With Curt Hitch On 2013 Honda Crosstour
  The Curt Hitch part # C11002 fits the 2013 Honda Crosstour and is a Class I hitch so the Vertex would need to be class I compatible for it to fit. Thule no longer produces the Vertex bike racks but there were a few different versions of the Vertex in production at one time. The Thule Vertex 2-bike rack part number 9028XT is compatible with your Class I hitch along with the 4 bike rack version which was part number 9029XT. However, if your Vertex is the swing-away version part # 9031XT...
  view full answer...
  
• Bike Rack Recommendation for a 2011 Honda Accord
  For your 2011 Honda Accord Crosstour you would have to use a 1-1/4 inch hitch like the Curt Hitch part # C11002. 2 inch hitches are designed for larger vehicles like SUVs trucks and vans. For a bike rack you would have to go with one that is confirmed to fit a Class I hitch, using an adapter would be a great idea since they cut the capacity of the hitch they are used on in half. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack...
  view full answer...
• Why Cant More than 2 Bikes be Carried on a Class I Trailer Hitch on a 2013 Honda Crosstour
  That is correct. On a Class I hitch it isn't the weight that is the issue. It is how far that weight is from the hitch receiver. A third and subsequent bikes will be too far from the receiver which will put a lot of extra stress on the hitch and where it attaches to the vehicle. If you have ever used a long wrench or breaker bar to loosen a lug nut it is the same concept: if the lever is long enough it takes very little force to loosen that nut. And if the weight on a bike rack is far enough...
  view full answer...
• Solution for Hitch Install Where Weldnut of Vehicle Frame Gets Stripped
  I have to recommend you find a way to use that mounting point on your hitch. What you will need to do is find the next size up thread tap and tap the threads to the next size up and source a bolt with the matching threads so that you can secure the hitch with all of the intended holes. If you do not use all of the mounting points of the hitch the warranty would be voided regardless of how you plan to use the hitch.
  view full answer...
• Recommended Trailer Hitch And Wiring For 2013 Honda Crosstour
  The trailer hitches we offer that are designed to fit your 2013 Crosstour, like the Curt Trailer Hitch, part # C11002, are Class l hitches and have a 1-1/4 inch receiver opening. Using a hitch adapter like part # HTAD does reduce the capacity of the hitch by 50 percent. This means for towing you would be limited to a trailer that weighs less than 1,000 lbs and a tongue weight about 100 lbs. If the weight of your bikes and bike rack together do not exceed 100 lbs, the HTAD would work...
  view full answer...
• Correct Trailer Hitch for a 2011 Honda Crosstour
  The Honda Crosstour is part of the Accord family and we do have a trailer hitch option for the 2011 model. I recommend the Curt Trailer Hitch Receiver part # C11002 which is a bolt-on fit. It has a class I rating with 1-1/4" receiver tube opening.
  view full answer...
• Class I Cargo Carrier for a 2010 Honda Accord Crosstour
  I recommend the 20 x 47 Reese Cargo Carrier, part # 63155 for your 2010 Honda Accord Crosstour. This combines a mesh floor and raised sides to give you extra versatility in cargo carrying. It is rated to carry up to 300lbs, though you'll want to verify your towing and tongue weight capacity in your owner's manual prior to use. This would work great with your Curt Class I Hitch, part # C11002. This is a no drill installation and I've included a video detailing that process on the 2012...
  view full answer...
• Correct Towing Products for a 2011 Honda Accord
  The part 116813-56173-40001 can be broken down into a few different parts. The first 6 digits (116813) are the same as a Class I Curt trailer hitch and it will only fit a 2013 - 2017 Honda Accord. The next 5 digits, same as part # C56173, is a wiring harness that fits a 2013 - 2017 Honda Accord. And the last 5, same as part # C40001, is only a 1-7/8" hitch ball but it would fit the ball mount that comes with the trailer hitch mentioned above. If you have a Sedan or Coupe then the Curt...
  view full answer...
• Solution for Stripped Weld Nut When Installing Trailer Hitch
  If you can access an open end of the frame where the weld nut broke off you could fishwire a new carriage bolt in place of the weldnut. Otherwise you may have to weld the hitch on or see if a local garage like you mentioned could come up with a way to re-weld in a weld nut. For a bolt leader you could then use the # C58400. I attached a link to an install video that at the 1:30 mark shows how to fishwire hitch hardware. You will need to drill out the old weld nut.
  view full answer...
• Best Way to Transport Expensive Bikes with a 2010 Honda Accord CrossTour
  We have hitches that are designed to fit your 2010 Honda Accord Crosstour. Hitch mounted bike racks are the way to go, especially for transporting expensive bikes for a long period of time. For a hitch you would want the Curt Hitch part # C11002 as this has been confirmed to fit your vehicle. For a top-of-the-line bike rack to use with this hitch I would recommend the Thule T2 Bike Rack part # TH9045. This rack is compatible with the hitch I referenced, can lock to your hitch and lock...
  view full answer...
• Recommended Bike Rack for 2013 Honda CrossTour
  Based on what you listed as wanting for a bike rack solution for your 2013 Honda Crosstour a hitch and hitch mounted rack would be your best option. Trunk racks are great but if your plan is to leave the rack on for extended periods of time and have it secure with locks a hitch rack would be way better than a trunk rack. For a hitch you would want the Curt class 1 Trailer Hitch Receiver part # C11002. The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy...
  view full answer...
• Class I Platform Bike Rack that Can Fit Curt Hitch of 2010 Honda Accord
  The Swagman XC bike rack part # S64650 that you referenced is compatible with Class I hitches like the Curt # C11002 you mentioned that fits your 2010 Honda Crosstour.
  view full answer...
• Recommended Trailer Hitch and Bike Rack for 2014 Honda Crosstour
  The Cur 1-1/4" hitch # C11002 and the EcoHitch 2" # 306-X7299 are both custom fit trailer hitches confirmed to work with your 2014 Honda Crosstour EL-X. I recommend the EcoHitch # 306-X7299 because it has a higher tongue weight capacity of 525 pounds verses the 200 pounds of the Curt and with the 2" receiver opening, you have many more options for accessories. The downside of the EcoHitch is that it is more expensive than the Curt and much more difficult to install. Then for a bike...
  view full answer...
• Trailer Hitch Receiver Tube Location on 2015 Honda Crosstour
  All of the 1-1/4-inch Class I trailer hitches we offer for your 2015 Honda Crosstour will install in essentially identical spots on the vehicle. The linked page will display all available hitch models. I checked with my contact at EcoHitch and Curt about the position of their hitch's receiver tube after its installed. The end of the receiver tube will extend out past the bumper cover by approximately 2-1/2-inches, even without the ball mount installed. This receiver tube location is a function...
  view full answer...
• Recommended Trailer Hitch and Bike Rack for 2015 Honda Crosstour
  We certainly do. You'll want to begin by installing a hitch, such as the Curt Class I, part # C11002. You can see the installation instructions by clicking the provided link. Once the hitch is in place, you can install a platform-style bike rack. Of the available choices, I'd recommend the Swagman XTC2, part # S64670. Ratcheting padded hooks hold the bikes firmly in place without any danger of them swinging back and forth, like what can happen with some hanging-type bike racks. There are...
  view full answer...
• Recommended Hitch for a 2011 Honda Accord
  I took a look online and the 2011 Honda Accord has a maximum towing capacity of 1,000 lbs so the capacity of all the available hitches would be well over what the vehicles can handle. This is common practice amongst hitch manufacturer's and why we advise customers to verify their vehicle's actual capacity and not go off of what the hitch can do. The EcoHitch Hidden Trailer Hitch item # 306-X7299 is the only hitch available for the 2011 Accord that has a 2" receiver. It however only fits...
  view full answer...
• Can I Remove My Spare Tire With Hitch Receiver Installed
  The crossbar on the Curt Trailer Hitch Receiver part # C11002 is bowed outward towards the rear of your 2013 Honda Accord Crosstour to allow for removal of the spare tire while installed. This is further explained at the :20 second mark in the attached video of an older hitch. The Curt has a similar design. When using the Curt Trailer Hitch Receiver, you will also need to use the required Curt Trailer Hitch Support Strap part # 18050 to secure all non-towing accessories. When not in use,...
  view full answer...
• Trailer Hitch Recommendation for 2015 Honda Crosstour
  Torklift manufactures hitches that are designed for heavy duty applications like full sized trucks. Their hitches would have capacities ranging from 15 to 30K, which would be well over the towing capacity of your Crosstour. The hitches available for your 2015 Honda Crosstour are all Class I, which would have a 2000 lbs towing/200 lb tongue weight capacity. This capacity would be limited by the capacity of the vehicle itself, which is 1000 to 1500 lbs, depending on how its equipped. I'd...
  view full answer...
• 2010 Honda Accord Crosstour Trailer Hitch Recommendation
  There are 2 trailer hitches confirmed to fit your 2010 Honda Accord Crosstour model: - EcoHitch # 306-X7299 - Curt # C11002 I prefer the EcoHitch because it has a hidden crosstube and a 2" hitch receiver, but if you're needing something more economical then the Curt is the best choice for you - just understand this has a Class I 1-1/4" receiver and a visible crosstube so your accessories will be a bit more limited and you might have less ground clearance because of the crosstube. Attached...
  view full answer...
  
• Will the Curt Hitch # C11002 Fit a 2012 Honda Crosstour AWD EX-L
  The Curt Hitch # C11002 will fit on your 2012 Honda Crosstour AWD EX-L model. My tech contact at Curt confirmed the fit and the installation instructions lists the fit for your model Crosstour. This hitch does not require drilling or welding for installation, it uses a bolt-on design for a simpler process. To bolt on your hitch, you will be using weld nuts already found on your vehicle that can be dirty and hard to use. I attached a help article on how to clean the weld nuts on your vehicle...
  view full answer...
• Recommendation for a 2013 Honda Crosstour to Allow Use of Yakima 4-Bike Hitch Rack
  The hitches offered for your 2013 Honda Crosstour are limited to the light-duty Class I variety, one of which is the Curt # C11002. A Class I hitch bike rack - any of them - is limited to carrying 2 bikes and no more. An adapter will not help in this instance; use of ANY hitch adapter has the unfortunate side-effect of reducing the hitch's capacity by 50-percent. This would mean your 200-lb-rated hitch suddenly drops to a 100-lb rating, which is not nearly enough for the weight of a rack...
  view full answer...

Do you have a question about this Trailer Hitch?