To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (327 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.The Hitch fits perfect! I did have to trim a piece of a plastic tab off as the instructions said but that was easy and I installed a bracket to hold the flat plug.
Fastest shipping in the West! Super easy install. Bolted right up in roughly 30 minutes by myself. I chose the Draw Tite since it is the only class IV hitch that I found and I wanted to primarily protect the rear hatch since Honda decided a rear bumper was not necessary.
Looks great. Got it installed as a one person job, but it was more difficult than I was anticipating. It wasn't the weight, although this has some heft to it, but it was awkward to hold up because of the pivot point due to the weight. Finally used the car jack to hold the hitch portion up while I got the bolts threaded. But my advice to other shade tree mechanics, have someone help hold this in place. It will save you a lot of time.
Brooke M.
11/25/2024
Its always impressive when I read that someone can do this on their own even with a jack! Do you work on cars a lot?
This is the fourth hitch I buy from your company and I am completely satisfied with the quality and perfect fit of your products. I have not installed this last trailer hitch I received today but I have no doubt it will be perfect just like the others.
I purchased this Draw-tite (76290) hitch for my 2019 Honda Passport Elite, which has the hands free liftgate. Well, I'm happy to say, this hitch does NOT interfere with the hands free operation*! It was easy to install; 3 bolts and washers on each side, torqued it down, install complete... didn't even need to move the muffler. This hitch fits like a glove and doesn't stick out past the bumper (so no shin injuries).
I also purchased a wiring harness and bracket to go with this installation and thanks to the built-in bracket on the hitch, I was able to just bolt my bracket to that and slip the 4-pin trailer wire right in place (no zip ties or drilling into the bumper necessary).
* (Side note: After I installed the wiring harness, I zip tied the slack to the top of the hitch. Soon after doing that, I ran into an issue were the liftgate would not opening hands free. I relocated the slack right against the bumper which corrected the issue.)
David
6/30/2021
One year later and the hitch is still working perfectly. The only thing I noticed is the hands free tailgate is a little finicky usually when youre holding something heavy, so you may need to keep trying for a bit. I have a feeling if I relocate the slack from the wiring harness it would probably correct the issue. But as far as the hitch itself, no issues at all.
This Class IV Draw-Tite Max Frame hitch receiver’s build and material quality is far superior to the recommended Class III receivers for the Honda Passport. I have zero worries this recover will ever fail me and highly recommend it. Installation was fast and easy using the included instructions.
Fit perfect in my 2023 Passport. Easy install by myself with the assistance of a floor jack. I'd recommend having another person to assist. One slip and it could have been bad considering the weight of the receiver.
Hitch has worked wonderful. Have pulled many different things and also used a platform for extra storage when traveling and no problem.
The trailer hitch arrived in excellent condition and was a simple and quick install. The hitch was a perfect fit.
Excellent customer service.Prompt shipping and great supportive videos to tackle any task .Tracking numbers provided so you can track your shipments throughout their journey.Highly recommend!! Just installed trailer hitch on 2020 Honda Passport in 20 minutes..
I was shocked how fast my order was processed and shipped. The customer service emails were very professional and the prices were far better than the dealer offered. I appreciate the installation videos too. I received the package yesterday in perfect condition. I would definitely order from them again. I will install it when the heat wave passes out west.
Exactly what I needed. Excellent customer service. eTrailer follows up to make sure you get what you ordered.
Brooke M.
12/6/2024
Im so happy you got what you wanted, David! We are here if you ever need anything else!
4.5 stars. The fit was perfect and there was enough flexibility in the mounting holes to easily center the hitch. My only problem was the hitch was scratched and scuffed up from the factory. There was one rub from shipping, but there were 5-7 spots I had to touch up with spray paint.
Super easy Install, less than 15 minutes. Everything fit well as it should and fit and finish done right. Definitely stronger capacities than OEM.
First of all the bracket for the seven pin connector doesn’t work and you don’t get any bolts to connect the bracket to the hitch very disappointing.
Received in 2 days! Very sturdy and easy to install including the trailer harness.
Went with this hitch receiver due to the additional tongue weight capacity and the pre-assembled wiring support angle. Shipping and delivery were prompt, and the receiver appears to be stout. Installation can be less than 20 minutes if you are a seasoned mechanic, and you have the required tools available. However, for a weekend warrior it may take a few hours and couple runs to the neighborhood hardware store to get to correct metric sockets and extensions. Overall, I am very pleased with the purchase and, yes, it would take me 20 minutes to install the next one.
Fit and finish of the Draw-Tite trailer hitch is exceptional. It fits my Honda Passport Elite perfectly. The kick sensor for rear hatch still works as indicated on etrailer site. Install took no more than 25 minutes. Scooted under the car, laid on my back... supported hitch with one knee and then held it to the frame with one hand... and ran the bolts in with the other hand... easy. The dealer wanted $1500 to install a Honda hitch vs. a couple of hundred dollars through etrailer and best of all this hitch looks better than the Honda offering. Absolutely satisfied 100%!
Very nice, high quality hitch. Simple install! Six bolts into pre threaded holes on the frame and you're done! There's no trying to fish nuts inside the frame like I've done on other vehicles. I put the rear tires on ramps and had tons of room. You could do it by yourself if you get creative, but much easier with a helper. I held it in place while my daughter got some bolts started for me.
I was considering going with the factory Honda hitch and harness, but their harness is 7 pin and I only need 4. Plus the hitch itself required installing a new cover with a cut out which is black plastic. I didn't want to give up the painted gray cover on my Trailsport, nor did I want to bother to paint the replacement cover. Not to mention the factory set up is way more expensive! I was able to buy the hitch, harness, and plug bracket with free shipping for less than it would've cost for the hitch only from Honda BEFORE shipping. From a value standpoint, it's a no-brainer.
Obviously the aftermarket hitches sit just a little lower under the cover, but it still looks great and fits perfectly!
I went with this Draw-tite hitch because I wanted to run the harness outside the vehicle. Unlike the other brands, It has a built in bracket to attach a 4 pin harness bracket giving a clean factory type look. I don't tow anything major or very often, but for what it's worth, the Draw-Tight also has a higher tow rating and tongue weight capacity than the other brands.
Everything was in stock and arrived super quickly!
Packaging was shit. Nice sturdy box but the receive cut its way out like it was trying to escape.
Nice unit. Will install it tomorrow.
Trailer hitch came half out of box, that side was scraped off powder coat/paint on top and bottom of area that will be attached, called to let etrailer and was satisfied with response.
Need to check packaging!
It took less than 30 minutes to install. I used a floor jack to support the trailer hitch until I had two bolts started, one on each side.
The trailer hitch I bought from e-trailer was awesome! Fit perfectly on my 22 Honda Passport, and worked great!
Definitely worth the money, and way cheaper than the dealer option. I had the dealer install mine and they said it was no different from theirs. Tammie is an awesome salesperson, she is patient and very knowledgeable about all I needed!
I appreciate how quickly etrailer.com responds to questions and how they were proactive with updates on my order. They were able to ship my order a head of original schedule. Instructions and videos were ideal and saved me time installing the hitch and wire harness.
I found doing business with them was easy.
Delivery was timely and installation was a breeze, especially with all the “how to” videos. One issue was cosmetic damage to the receiver hitch, see pictures. I didn’t not notice any damage to shipping box. Called customer service and they provided a discount to cover the cost to purchase touch up paint.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Henry
7/22/2024
Its been a year already! This hitch works great and still looks brand new.