The 14 holes in this pintle plate provide 6 different mounting positions for your pintle hitch so that you can match your trailer height. The shank slides inside your 2" x 2" hitch receiver. Durable carbide black powder coat finish.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a Curt Pintle Hook Mounting Plate for 2" Hitches. This hitch mounting adaptor plate provides a mounting point for a pintle hook, or a pintle hook hitch ball combo. It offers six different positions so it's going to let you customize the height of your pintle. This plate can be used in the drop position, or it can be flipped over and also used in the rise position, whatever works best for your application.The unit is made from a sturdy steel construction. It's very strong, very durable, features a really nice durable carbide black powder coated finish that's designed to resist rust and corrosion, ensuring that the unit lasts and looks good for a really long time.Now to secure this in your hitch, you will need to use a hitch pin and clip, or a hitch lock. Those items are sold separately, and available at etrailer.com.
The pin holes on this unit will accept a standard 5/8" diameter pin. It's designed for 2" by 2" trailer hitch receivers. It offers a weight capacity of 10,000 pounds.The mounting plate . Take some measurement of that for you, real quick. Starting with the overall width, edge to edge, you see that measures 5" wide.
And the overall height on that mounting plate measures 12-1/2" tall. The mount holes, side to side, separate on center by 3-3/8" and then, up and down, they're separated on center by 1-3/4".And then the last thing I want to mention for you is the shank length. We took that measurement from the center of the hitch pin hole to the front of the mounting plate, and that measurement is about 10". That's going to do it for today's look at the Curt Pintle Hook Mounting Plate for 2" Hitches.
Average Customer Rating: 4.9 out of 5 stars (132 Customer Reviews)
The 14 holes in this pintle plate provide 6 different mounting positions for your pintle hitch so that you can match your trailer height. The shank slides inside your 2" x 2" hitch receiver. Durable carbide black powder coat finish.Exactly what I needed to level pulling my military trailer. The pintle hitch bolted to the mounting plate within a few minutes. Now I can get into the back country with my FJ pulling a trailer made possible by the your pintle hitch/mounting plate Combination. Thanks
As I stated with the pintle hitch everything is ruggerder than I had imagined it would be. This set up is going to help me out like no tomorrow. Thanks for your quality of products & speedy delivery!
Love buying from eTrailer. Great products, price and service. Thank you.
Excellent product at a great price. Highly recommend both the product and etrailer. The customer service people at etrailer are knowledgeable and understanding and really seem to look out for the customer. AAA+++ Unfortunately for me the mounting plate was too high (my fault) and would damage the tailgate of my truck. I wish Curt would make a plate about 2 inches shorter.
This has worked out great for a year now in our F550
We needed this to raise the level of a pintle hitch for our water trailer. The height is just right now. Although I haven’t towed with it yet, I’m sure it will be fine. After all, it does have 5 stars on the reviews. I do want to say that your shipping was fast. Not even a week! That I appreciate!
Ordered this product as well as some leveling jacks, all were delivered promptly, well packed, and as advertised. I would recommend them to anyone looking for good selection, pricing, and service.
Good welds and very tough paint coating
This is a well built hitch mount and I couldn't find it for less anywhere.
Products were exactly as advertised and arrived just a few days after the order was placed, with free shipping.
Great quality equipment. Fast Delivery as always. Will visit again . Thank you!!!!
Good price fast shipping especially since it’s during coronavirus 19.
good quality. well made.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Robust! This pintle mount plate is a monster! Fitment to my 2013 Toyota 4Runner 2” hitch is great, and precisely the size I was looking for, given rear hatch access,(The rear hatch swings free and clear) and pintle hook rise requirements. I easily went from 17” to 26” off the pavement! Photos will show the additional reflective tape I applied to necessitate a safe night’s drive. Photos show the really nice locking pin that secures the mount plate. Special kudos to Jessie at etrailer customer service to expertly assist me in the selection discussion- what a joy! Delivery was ahead of schedule and the product met my specifications! Now let’s get on the road and see how she runs!
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
The 30,000Lb pintle hitch bolted on this plate with ease...This plate has just the right amount of adjustments to suit different trailer/tow vehicle heights.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Well built and very heavy. Exact replacement for my 2 inch assembly from my old truck's pintle plate.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Awesome hitch, would pull the frame out from under the truck before this hitch would fail….
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Allowed me to really get my trailer at right level
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Very fast at delivering and decent hitch
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
This 2 1/2” Curt Pintle Hook Mounting Plate is as described. Very well made. Have not used it, but I have mounted it to a Curt pintle hook. Very pleased with my purchase.
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.