1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24819
lowest price pledge
Retail:$142.88
Our Price: $86.80
You Save: 39%
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
In Stock
Trailer Hitch 24819 - 1-1/4 Inch Hitch - Draw-Tite
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24819 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (97)
  • Q & A (28)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24819

  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24819 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60209 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24819 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24819

Average Customer Rating:  4.8 out of 5 stars   (97 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24819
by: 08/27/2020

Works fine. 869837



- 24819
by:

Thank you very fast ...very professiona l! 847359



- 24819
by:

Good and quick service. good product, well built. 812210



- 24819
by:

Solid construction; took me less than 90 minutes to install, by myself, without a lift or stand, and and bad right shoulder. Only tools was a 1/2” socket wrench and a flat screwdriver. Rather tight fit, was worried that towbar wasn’t Going to fit between the two support structures, but with a good shove It went right into place! 811399



- 24819
by:

Solid construction! This will last. 791032



- 24819
by:

installed quick. A perfect fit 768348



- 24819
by:

I am amazed at how fast it arrived, and i didn't pay for expedited shipping. Very happy thanks 732510



- 24819
by:
2007 Toyota Yaris

It fit perfectly in my car Toyota Yaris 2007, I installs by myself 717337



- 24819
by:

Easy To install 627983



- 24819
by:
2009 Toyota Yaris

Fit perfect on my 2009 Toyota Yaris Sadan it took about 45 min. to install also bought 5in. Receiver with 2in. ball perfect height 589883



- 24819
by:
2008 Toyota Yaris

A bit difficult to install due to the small spaces for my hands. This will definitely hold up and is very sturdy. Looks very nice also. Shipped super quick (got it within 2 days of ordering) 549702



- 24819
by:
2008 Toyota Yaris

Receiver installation presented a little difficulty with getting two of the fasteners removed and new ones installed. That was totally due to the difficult access with large hands on such a small vehicle. Quiet perseverance got it done. 529655



- 24819
by:
2007 Toyota Yaris

worked great as described 523196



- 24819
by:
2011 Toyota Yaris

I've had this hitch on my 2011 Yaris for a year now. It's held a hitch basket holding a 6 person tent, 60lb deep cycle battery, bag of tools, and an air mattress for about 8,000 miles across 24 states. It is damn strong and very reliable. Worth every penny! It was a pain to install but that's because I didn't have the right wrench for the tight space to reach the bolts. 489365



- 24819
by:
Workhorse

Easy to install and a workhorse of a pr oduct! 482422



- 24819
by:

The hitch fits perfect; easy to install; with the right tools it takes about 30 minutes to install it. Now I can use my new bike rack. 479642



- 24819
by:

Thanks for asking. I've used the hitch, bike carrier and stabilizer strap for two years now continuously. The only issues that I have had are that the plastic coating around the metal hook that attaches the stabilizer strap to the car has split, exposing metal which is starting to rust, and the closed foam cushions on the bike clamps that keep the bike held down and secure are starting to split on the top. But it is still working fine. 467240



- 24819
by:
2007 Toyota Yaris

A good price, quickly delivered, although the part was slightly damaged. 430284



- 24819
by:

Installation photos 409917



- 24819
by:

Angela was extremely helpful on the phone and processed my order promptly. I received the hitch in 3 days! Outstanding customer service! Thank you! 402183



- 24819
by:
2009 Toyota Yaris

We ordered a trailer hitch for our 2009 Toyota Yaris. It was easy to install and came with the light kit. Everything we needed was included. Perfect for us!! Thank you so much! Now we can tow our fishing boat, and our small utility trailer! 401738



- 24819
by:
2011 Toyota Yaris

Fast 397612



- 24819
by:
2007 Toyota Yaris

Fast service perfect fit very pleased great company!! 379428



- 24819
by:
2010 Toyota Yaris

It has been a year and the hitch continues to perform well. Many are shocked to see a Yaris with a hitch. With a lightweight trailer it does great. We moved 250 miles and we loaded a trailer with a riding mower, a gas grill and assorted tools and got 32 mpg at 65. There are a couple of bolts that were a challenge to put on. I put the hitch on by myself and it has worked out very well. 366548



- 24819
by:

Very happy with the trailer hitch and got it before scheduled. 363692


28
138
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • How to Carry 3 Bikes on a 2010 Toyota Yaris 3-Door Hatchback
    For just carrying bikes I recommend the Draw-Tite trailer hitch # 24911. With it the receiver will be visible but the cross tube will not. You can also use # 24819 and it will have the receiver showing but the cross tube will be hidden. The tongue weight capacity, which is the capacity to look at when using the hitch for a bike rack or cargo carrier, is 200 pounds. All of the trailer hitches for your Yaris including the Draw-Tite models listed here are Class I hitches. Class I trailer...
    view full answer...
  • Conical Tooth Washer Placement for Trailer Hitch Installation on a 2010 Toyota Yaris
    The washers that are included with trailer hitch # 24819, are conical tooth washers similar to # 01292-008. You are correct, they are sort of bowl shaped. The tooth end goes towards the hitch. I have included a link to the installation instructions for the hitch. Using a thread locker like Loc-Tite, # LT37643, can be done but it is not necessary. The conical tooth washer prevents the bolt from backing out.
    view full answer...
  • Can a 2007 Toyota Yaris Tow a Watercraft Trailer Using Draw-Tite Trailer Hitch # 24819
    The Draw-Tite Sportframe Trailer Hitch Receiver, part # 24819, will fit the 2007 Yaris Sedan and 3-Door Hatchback, but not the 5-door hatchback. I have included a link to an installation video for this hitch and also one to our main page for hitches for the 2007 Yaris. At the top of the page there is a drop-down menu (Select Vehicle Style) that will enable you to narrow the hitch results to just those suitable for your particular Yaris. All of the hitches we offer for the Yaris are Class...
    view full answer...
  • Comparing Draw-Tite Trailer Hitch # 24819 and Hidden Hitch # 60209 For a 2010 Toyota Yaris
    Actually, there are 4 trailer hitches available for the 2010 Toyota Yaris Sedan. I have included a link to them for you to view. And you are correct, both the Draw-Tite # 24819 and the Hidden Hitch # 60209 (no longer available) will fit. The difference between these two is that the Hidden Hitch, # 60209, comes with the correct ball mount, pin, and clip. With the Draw-Tite Hitch, you would have to purchase them separately. You actually save a little money when going with the Hidden Hitch....
    view full answer...
  • Why Is There No Tow Rating On The 2010 Toyota Yaris
    Toyota does not rate this vehicle for towing; this could be due to limited engine or transmission capacities, frame strength, ground clearance (only 5.5 inches) or all of the above. The availability of a hitch for a certain vehicle does not necessarily mean that vehicle can tow. Hitches are available for many non-tow-rated vehicles to enable use of accessory items like bike carriers and cargo baskets. Despite your prior experience I cannot advise you to operate your vehicle in a...
    view full answer...
  • What Wrench Makes Installing Upper Bolt of Draw Tite Hitch 24819 Easier
    The size wrench or socket used for installing the hardware of the # 24819 is 1/2 inch although one customer said he used a 13 mm. A couple customers have came back and said that flat wrenches or ratcheting wrenches would help the most for the difficult to access bolt. Smaller hands seems to be the consensus as well. I attached a video that shows the install as well. I wouldn't recommend removing the bumper. Between the Curt and the Draw Tite I like the Draw Tite better since it doesn't...
    view full answer...
  • Can I Tow with a 2008 Toyota Yaris Hatchback
    All of the hitches we offer for the 2007 Toyota Yaris are Class I types intended for light-duty use, such as for attaching a bike carrier or cargo basket. Based on my research the 2007 Yaris is not rated for towing (nor are certain other Toyota models such as the Prius). You will want to refer to your owners manual or speak to a local Toyota dealer for guidance before attempting to tow any trailer. Your Toyota dealer can provide information regarding any potential engine or transmission...
    view full answer...
  • Can the Draw-Tite # 24819 and BikeWing-2 # B01311 be Used to Carry Bikes with a 2009 Toyota Yaris
    The Draw-Tite Sportframe Trailer Hitch Receiver # 24819 is a great option to use in conjunction with the Lets Go Aero BikeWing-2 # LGA54FR on your 2009 Toyota Yaris. They are both lightweight but can accommodate the weight that you are needing to carry. To determine if your bikes can fit properly I can give you a few measurements. The center of the hitch pin hole for the receiver will sit about 3-1/2" - 3-3/4" from the rearmost part of your bumper. From the center of the hitch pin hole...
    view full answer...
  • Will Draw-Tite Trailer Hitch # 24819 Fit a 2007 Toyota Yaris S Sedan
    If your 2007 Toyota Yaris S does not have the Aero package then the Draw-Tite trailer hitch # 24819 should fit fine. If it does have the Aero package you will most likely need to trim the area on the added fascia where the hitch receiver will be. If you plan on doing some towing, be sure to consult your owners manual to determine if you can tow with the Yaris. If you can, the correct ball mount is # 3593 and you can use pin and clip # PC2. For a 1-7/8 inch diameter ball, use # 19256...
    view full answer...
  • Trailer Hitch Recommendation for a 2008 Yaris Sedan Base Model
    Yes, I checked with Draw-Tite and the part # 24819 that you referenced is the correct hitch for your 2008 Toyota Yaris sedan base model. I attached an install video for this hitch for you to check out as well. For trailer wiring you might be interested in the part # 118517. For a 1-7/8 inch ball # 19256, or for a 2 inch ball part # 19258.
    view full answer...
  • Hitch to Fit 2010 Toyota Yaris 5-door Hatchback
    There are several hitches designed for the 2010 Toyota Yaris 5-door Hatchback, but none of them are specifically for the RS bumper cover. I see that they all mount right against the standard bumper cover. After reviewing the installation video it is unclear if it requires a slight modification for the RS. If it did it would be very low under the bumper mostly. I have included a link to that video. I prefer the Draw-Tite # 24819 hitch you selected as installation should be a little...
    view full answer...
  • Can a Toyota Yaris Support a Dirt Bike and Carrier
    You are correct, your dirt bike and carrier would exceed the weight rating of any trailer hitch for the Toyota Yaris. There is also important information that you should be aware of when carrying additional cargo with your Yaris. In the United States market, Toyota recommends against installing a trailer hitch for any type of hitch mounted accessory such as a bike, motorcycle or cargo carrier, at least on models from 2005 to the present. In the Canadian market, Toyota allows for the...
    view full answer...
  • Where to Find Torque Specs for Hitch Install on 2007 Toyota Yaris
    If you check out the installation instructions link I attached for the Draw Tite Hitch part # 24819 that you have installed on your 2007 Toyota Yaris you will see that below the fifth step there is the recommended torque spec listed for the install hardware. For liability reasons we don't post them on our site since they are subject to change. The instructions link directly to the manufacturer's site so if there is a change the instructions will always be accurate.
    view full answer...
  • Is There Drilling Required to Install a Hidden Hitch Trailer Hitch on a 2008 Toyota Yaris
    I checked the installation instructions for the Draw-Tite Trailer Hitch Receiver # 24819 and you will not need to do any drilling to install this onto your 2008 Toyota Yaris. I attached the installation instructions for you to check out also. You may be interested in purchasing the following products to complete your towing setup if you plan on doing some towing: Tow Ready Custom Fit Vehicle Wiring # 118517 (installation instructions attached) Hitch Ball # 19256
    view full answer...
  • Is Hardware Included with Draw-Tite Hitches
    All the necessary hardware to install Draw-Tite hitch, part # 24819, is included with the hitch. All of the nuts, bolts, and other hardware are shipped with the hitch.
    view full answer...
  • Will the Draw-Tite Class I Receiver Part # 24819 Fit a 2012 Toyota Yaris 5 Door Hatchback
    According to our friends at Draw-Tite, the Class I receiver you mentioned, part # 24819 will fit all 2012 Yaris liftback models, regardless of whether they are 3 door or 5 door. The distinction is made because in previous model years, the Yaris was also available in a Sedan model. If you were planning on using the hitch for towing purposed, you might also need the following: Draw bar and pin and clip, part # 3593 Trailer Wiring Harness, part # 119178KIT 1-7/8 inch trailer ball,...
    view full answer...
  • Is Bumper Removal Required to Install Draw-Tite 24819 on a 2009 Toyota Yaris Hatchback
    You will need to remove some plastic trim rivets so that you can pull back the bumper fascia, but the fascia and rivets go back into place once the # 24819 trailer hitch is installed. It is not necessary to remove the bumper. Take a look at the links to the installation instructions and an installation video to get a better idea of how the installation will go. The video shows a 5-door 2009 Toyota Yaris, but the installation will be the same on your 3-door model.
    view full answer...
  • Toyota Yaris 2012 Hatchback Hitch Recommendation
    The Draw Tite Hitch part # 24911 is confirmed to fit your 2012 Toyota Yaris Hatchback. For trailer wiring you would want the Tow Ready wiring harness part # 119178KIT. For a ball mount you would want the part # 3593, for a 1-7/8 inch ball # 19256. Be sure not to exceed the tow ratings of your vehicle found in the owners manual.
    view full answer...
  • Compatibility of Thule Doubletrack Pro with 2008 Toyota Yaris
    In order to determine if the receiver will offer enough clearance for the rack to work correctly, we need to know the distance from the hitch pin hole of the receiver (once installed) to the furthest rearward point of the rear bumper. I spoke with one of our contacts at Draw-Tite, who tells me that this particular measurement is not available, but no worries, we can figure it out. He was able to tell me that the front face of the receiver is 6-5/8 inches rearward of the attachment...
    view full answer...
  • Draw-Tite Class I Hitch Part # 24819 for 2007 Toyota Yaris Hatchback
    The Draw-Tite Class I Receiver Hitch, part # 24819 is the correct hitch for your 2007 Yaris Hatchback. To order this hitch, you can call one of our Customer Service Specialists at the number below or click on the provided product link to order online. I have also linked to install instructions and an install video.
    view full answer...
  • Will a Trailer hitch Fit a 2007 Toyota Yaris S Sedan with Aero Package
    I reviewed some images of the 2007 Toyota Yaris S Sedan with Aero package. It looks like that package adds several inches to the factory fascia all around the car. Because of this, you will most likely need to trim the area on the added fascia where the hitch receiver will be for any of the available hitches including # 24819. There is no hitch specifically for models with the Aero package. I have included a link to the installation instructions for you to view. I have also included...
    view full answer...
  • What Trailer Hitch Is Available For A 2008 Toyota Yaris Hatchback
    I have three hitches available for a 2008 Toyota Yaris Hatchback. They are all Class I 1-1/4 inch hitches and are rated at 2000 lbs. towing weight capacity with 200 lbs. tongue weight capacity. The Curt Class I 1-1/4 Inch Hitch # C11480 will fit and it includes the ball mount and pin and clip. If this hitch is used for non-trailer loads like a bike rack or cargo carrier, it will require a stabilizing strap # 18050. It gives added support and stability to the bike rack or cargo carrier...
    view full answer...
  • Best Trailer Hitch for Towing with a 2010 Toyota Yaris
    Hitch ball # 19256 with the short shank, 1-9/16 inches, is the ball you need. I suggest the Draw-Tite Sportframe Class I # 24819 for a trailer hitch recommendation.
    view full answer...
  • Installation Differences Between Curt, Draw-Tite and Hidden Hitch Models for 2010 Toyota Yaris
    After looking over the installation instructions for both hitches, it appears that installing the Curt Class I receiver, part # 11060 might be a bit easier than the Draw-Tite model. The upper bolt holes for the Draw-Tite will be a bit difficult to reach, and the hitch must be rotated upwards to maneuver it behind the bumper fascia. The Curt receiver simply attaches to the inside of each frame rail. The install times mentioned all three hitches are identical. If I had to choose, I would...
    view full answer...
  • Will Curt Hitch and Drawbar fit a 2007 Toyota Saris?
    The Curt Trailer Hitch Receiver # C11060 will fit your 2007 Toyota Yaris if it is a sedan and not a 3-door hatchback. The correct ball mount for this hitch is the Curt # C45521, for which you'd also need a pin and clip, # F-4. Keep in mind that using this hitch would require the use of Curt's support straps # 18050 for non-trailer loads or you would void the warranty. Should you have a hatchback, I highly recommend using the Draw-Tite # 24819. It will not require the use of...
    view full answer...
  • Can Tow Bar Wiring on 2007 Toyota Yaris be Used to Tow a Trailer
    No the tow bar wiring harnesses do not work in reverse. In other words if you were to plug in a trailer nothing would happen. You would need to install a regular trailer wiring harness in your 2007 Toyota Yaris. If your Yaris is a sedan you can use wiring harness # 118517. If it is a hatchback then you would need a hardwire harness instead; # 119178KIT. Please note that even though there are trailer hitches available for your Yaris such as # 24819 this vehicle is not designed for...
    view full answer...
  • Will the Rightline Gear Sport Jr. Rooftop Cargo Bag Work On a 2010 Toyota Yaris (2-Door)
    The Rightline Gear Sport Jr. Rooftop Cargo Bag part # RL100S50 won't work on a 2010 Toyota Yaris (2-Door) per Rightline. There is no way to run the straps across the roof. The most cost effective option we have for you to carry extra gear is with a trailer hitch and cargo carrier/bag, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24819 with the 17x46 Curt Cargo Carrier part # C18145. The Rola Expandable Cargo Bag part # 59102 could then be used for protection.
    view full answer...
  • Best Bike Rack Recommendation for a 2007 Toyota Yaris Hatchback on Long Road Trip
    As long as the Thule Passage Bike Rack part # TH910XT isn't overloaded or installed on a dirty vehicle you should have no problem with it damaging your 2007 Toyota Yaris which it has been confirmed to fit. I attached a review video for the rack for you to check out as well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Joshua S
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
Test Fit:
Shane T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.