Trailer Hitch Recommendation for a 2008 Yaris Sedan Base Model

Question

Question:

Does this hitch fit the 2008 base sedan model. Thanks

asked by: Dave C

0

Expert Reply:

Yes, I checked with Draw-Tite and the part # 24819 that you referenced is the correct hitch for your 2008 Toyota Yaris sedan base model. I attached an install video for this hitch for you to check out as well.

For trailer wiring you might be interested in the part # 118517. For a 1-7/8 inch ball # 19256, or for a 2 inch ball part # 19258.

expert reply by: Jameson C

0

Answer 1

Good news! There are a few hitches that will fit your Toyota Yaris LE 5-Door Hatchback. I have linked them all to this page for you to see but I highly recommend the Draw-Tite #24911, because of the no drill application and you won't have to use…

view full answer...

Answer 2

As there is only a class I trailer hitch receiver like the Curt #C11480 available for your 2008 Toyota Yaris, you are going to want to use the Thule Epos Bike Rack #TH99XE. This rack is a class I and is capable of holding 2 bike up to 140lbs with a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Trailer Hitch Recommendation for a 2008 Yaris Sedan Base Model

Featured Help Information

Miscellaneous Media

Continue Researching