Comparing Draw-Tite Trailer Hitch # 24819 and Hidden Hitch # 60209 For a 2010 Toyota Yaris

Updated 04/26/2011 | Published 04/23/2011

Products Featured in This Question

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$17.00

Question:

When I search your site I get two different models for the 2010 Toyota Yaris..I have the 4dr sedan... Code: 60209 Code: 24819 Which one is correct?

asked by: Steven W

Expert Reply:

Actually, there are 4 trailer hitches available for the 2010 Toyota Yaris Sedan. I have included a link to them for you to view. And you are correct, both the Draw-Tite # 24819 and the Hidden Hitch # 60209 (no longer available) will fit. The difference between these two is that the Hidden Hitch, # 60209, comes with the correct ball mount, pin, and clip. With the Draw-Tite Hitch, you would have to purchase them separately.

You actually save a little money when going with the Hidden Hitch. Otherwise, both hitches will fit, and they have the same specs: 200 pounds tongue weight capacity, and 2,000 pounds gross trailer weight capacity. They even share the same instructions which I have linked for reference. If you do not plan to use the hitch for towing, then I would go with the Draw-Tite hitch # 24819.

If you go with the Hidden Hitch, you would just need to add a ball and trailer wiring if you plan on doing some towing. For a ball, you can use either # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For wiring, use Tow Ready T-One Wiring Harness, # 118517. I have included a link to the installation details for the wiring harness for you to view.

expert reply by: Michael H