Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Dodge Magnum's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Great product very fast delivery
Great service and quick shipping. Appears install will be easy
Excellent product. It bolted up with very little trouble and appears to be very solid.
The hitch went on without a hitch :-) The hardest part was moving the exhaust system out of the way but even so the entire process including the wiring took under two hours.
the hitch was alittle intimidating until i watch the video on installing it. very informative. then i went to the garage and 1,2,3 i had it on in no time.
Super fast delivery, ordered on Sunday night and it was on my porch Wed afternoon!
The hitch/harness were an easy install & both sets of directions were vehicle specific and extremely well written, nice job.
Thanks for the great service!
Product bolted right up, no problems. It was harder to drop the exhaust pipes than to install the hitch. It was a better fit than I expected and I received it sooner than expected as well. I have already recomended your service to others and plan to make an additional purchase. Thanks for great service.
I love this product. Went in without an issue. I would highly recommend buying the ball mount at the same time and save your self on shipping. I tried to find one locally and nobody carried the longer ball mount.
All worked well. Mounted as described in video which was very helpful. Please note I had to re-tap the threaded holes in my body to accept the 3 bolts wthout the backing plates. The threaded holes had light corrosion that kept the bolts from running up. Tap size is M12x1.75. No fault to the hitch just installed on older car. The hitch is well thought out and the quality is nice.
Best there is!So I ordered the CL-III hitch and wiring harness for my Dodge Magnum SXT. Order placed late afternoon on 27 Dec- arrived early afternoon 29 Dec, that is seriously quick shipping. After I placed the order, I rec'd email confirmation and with the usual customer service statement "feel free to contact me...". Well, I did, I immediately emailed and asked how I could upgrade my shipping, that I needed the hitch no kidding in time for my last move retiring from the Army. The shipping was updated, confirmed and was so without incurring more charges. Product fit as stated, very easy install, and quality of the Curtis product is awesome. T- connector for the Dodge CAN-Bus electrical system was clearly labeled, well packaged and instructions were complete. Total install time for me using basic hand tools was just under an hour for both hitch and harness. This is my third order from eTrailer and will definitely do business with them again.
Charlie-
Here are three pictures of my new Curt Hitch installed on my Chrysler 300 Limited.
Very impressed with this Curt hitch. I was a more than a little apprehensive of adding a hitch to my '07 Dodge Charger R/T. This hitch has an incredible high gloss finish and it tucks up neatly under the car whereas it's not nearly as noticeable as I feared it would be. In my opinion it does not distract at all from the appearance of my car. It took about an hour to install. Great product and I ordered it on a Thursday and received it on Monday.Would order another Curt hitch from Etrailer.com in a heartbeat.
Trailer hitch i ordered came super quick. Was exactly what I ordered and extreamly happy with my purchase
Also it was not damaged like another website i ordered from which also came late and was not what i ordered.
As a soldier I had not time to place the package on my vehicle as of yet But what I can say Is that my package came early and with all the components to it and it was the cheapest at the time for all that I ordered your prices are the best I have seen in months keep them low and you will have more come to buy from you.
You have my recommendation
SGT NELSON
US ARMY
ACTIVE
P>S> I will send pics later
Took me a few hours to install but I am 86 years old and worked on my driveway, had no problems with the hitch or the wiring set. Works great.!!!
I recently ordered 13465 class III hitch and this C55546 vehicle wiring harness for my 09 Chrysler 300C. It was very easy to install and times provided were very close. It took me just about two hours to install the hitch and harness. I did however stray a bit from the instructions on the harness though to make it more permanent and secure. Drilled hole in trunk floor pan and ran harness through it with some wire loom and a grommet. Then drilled a small hole in flat part of safety chain bracket on hitch to secure harness to hitch. I was a first time customer and would diffently use etrailer.com again.
Hitch mounts right up with no installation problems. A lot easier if you have a helping hand but doable by your self as I did. Use it mostly for bike rack but towed a buddy's railbuggy home when it broke down once and it held up good.
The product fit perfectly, arrived very well packaged with all needed hardware. While it took longer than advertised to get on the car, it may have been my struggle with mufflers that had to be moved out of the way for attachment to car. The only surprise was the load capacity on the hitch receiver. I thought I would receive a 5000lb capacity unit, but received a 3500lb unit. More than enough for my towing needs so I'm happy with the installation. The unit is barely visible when the ball is not in the receiver. That's a nice perk.
This receiver is very well designed and the coating on it is well done and appears quite durable. It tucks up under the car so far you barely notice it is there. Installation was EXACTLY as described in the instructions and video. Lowering the exhaust is NOT a big deal. My toughest hurtle was cleaning out the M12-1.75 threads that had corroded a bit on my 2006 R/T AWD Magnum. Not having the right tap, I had my local muffler shop clean those out, then I installed the hitch. Easy Peasy.
Quality & Fitment is very good, installed on Dad's 300C Heritage Touring everthing went very smoothly on install, visually inspected hitch welds and paint all looked to be very well done, purchased this hitch for use of a power chair lift so that dad would have more mobility options but as of today the lift hasn't been used due to weather! Also purchased the stabilizer strap, don't really care for the attachment point, extra care will need to be taken to not damage paint at forward edge of trunk lid, will use a microfiber chamois cloth changing frequently to avoid any problems!
I recently purchased this hitch and wiring harness for my car so I could haul my Polaris rzr. The products were installed with ease, only issue I had was rusted threads on my car. A little spay or a tap solved this issue. The hitch handles the load well. I would recommend this supplier to anyone. Fast delivery and good service. Instructions are detailed and complete. Videos are a plus, very helpful.
I would recommend etrailer and this product,,very fast shipping and simple to install at a great price
Now I can haul a trailer with motorcycles and kayaks with my Dodge Charger
My 2 grandsons helped install
I placed my order on a Friday evening around 9pm. I was not expecting to get any shipping notice until after the weekend. I received an email about 2 hours later saying my hitch was about to ship! No other company I've ever shopped online with was that quick. I choose the 3-5 day shipping and got it Tuesday afternoon. Both the hitch and wiring harness purchased are top quality. Only negative I have is that I have to download and print out the mounting instructions...
Terry O.
10/17/2017
Im very happy with my trailer hitch. I thought I would be able to install it myself but once I saw the instructions, I decided to have a professional install it for me.
Instructions were pretty good. I had never installed a hitch before. Took about 2 hours with me doing it by myself. Instructions say novice takes about an hour. I think with 2 people, it definitely would take an hour or less. Will need to drive back of car onto ramps in order to get to exhaust hangers to drop exhaust lower so you can bolt in the hitch. This was for a 2010 Dodge Charger. I bought this vehicle used so I don't know if it had a custom bumper on it, but the hitch doesn't go out far enough so my bike rack looks like it would rub against the bumper. I'm going to have to get an extension, but I'm still very happy with the product.
David
5/14/2021
Still working just like I had installed it yesterday. Would buy again.
Curt Hitch receiver fits nicely on 2006 Chrysler Hemi C. It is mostly out of site when not towing, and does not detract from vehicle's appearance.
Steve W.
8/25/2017
Still working great. Nice to be able to tow my utility trailer with my 300 when my Suburban is in for maintenance.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
4/18/2025
Kudos to you, Jim! I'm glad that the install went on smoothly as well as the wiring harness :)