Will Curt Hitch Fit 2009 Dodge Ram 2500 With Factory Bumper

Question

Question:

Will this fit a 2009 Dodge 2500 HD with factory rear bumper.

asked by: Randy S

0

Expert Reply:

The Curt # C15400 is only designed to fit the cab and chassis model of the 2009 Dodge Ram. Since you have the 2500 it will not fit your truck. What you need is the # C15409. This is also a Class V hitch with the same capacity and a 2" receiver.

expert reply by: Robin H

0

Randy S.

3/11/2024

I have a class IV hitch from factory,I am getting a new RV and tongue weight getting close to max.

Robin H.

3/11/2024

@RandyS all of the hitches I listed before were Class V just like the one for the cab and chassis model. They actually exceeded the tongue weight of the one you asked about since they had the 2-1/2" receiver. I went ahead and amended it to the 2" receiver model which will fit your truck. It has the same 2,550 lb max tongue weight.

Answer 1

You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" #C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part #C15809 which is a confirmed fit…

view full answer...

Answer 12

Hey Todd, welcome back! Using the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect item #TLA7311S and installing the SuperSprings SuperSway Stops item #SS75GR will definitely help with sway. They're going to prop up your leaf springs and…

view full answer...

Will Curt Hitch Fit 2009 Dodge Ram 2500 With Factory Bumper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching