Can A Bumper Plate Be Used Instead Of Trimming For A Hitch Installation On A 2020 Kia Telluride

Question

Question:

Will a bumper plate work instead of cutting/notching the stock bumper?

asked by: John

0

Expert Reply:

As long as this bumper plate fits in place of the original bumper panel, it could provide an alternative to having to trim the bumper panel during installation of the Curt Trailer Hitch Receiver # C13420. The hitch is a confirmed fit while we can't confirm fit for this bumper plate. You will want to note the dimensions of the receiver at 4-1/2" from the center of the hitch pin hole to the rear of the bumper and ground to the top edge of the receiver tube as important dimensions pairing up the hitch with the plate.

The included video resource provides a great overview of the installation process beginning to end.

expert reply by: Patrick R

0

John P.

5/9/2020

It would be nice to know if the Kia Hitch Cover/Bumper Insert (part # S9F61AU060) would work with the Curt hitch. This would prevent cutting the bumper fascia and would give a more finished look, similar to what the OEM hitch with cover would look like. Thanks for all your detailed answers.

Chris R.

5/12/2020

I wish I could confirm (either way) if the Kia Bumper Insert will work with the Curt Hitch # C13420, but since it's not something we've physically tested I really can't say for sure. Just judging by the design difference between it and the OEM hitch though, I'm guessing it won't be compatible.

Answer 1

I would be happy to! To add a hitch to your 2024 Kia Telluride, I recommend the etrailer item #e45ZR. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper…

view full answer...

Answer 2

When installing the Curt Trailer Hitch Receiver #C13420 on a 2020 Kia Telluride you do have to remove the spare tire; that is the first step but it does get put back into place at the end of the installation. The install of this hitch is relatively…

view full answer...

Answer 3

Yes, it does! The Curt hitch item #C13420 is confirmed to fit the 2024 Kia Telluride, however I have a better option. I recommend the etrailer Hitch item #e45ZR. This hitch is manufactured to the same standards and specifications as the Curt item…

view full answer...

Answer 4

I'm not quite sure what you're referring to but fitment for trailer hitches and wiring is typically dependent on the manufacturer getting their hands on the newer year model of the vehicle to determine if any changes are needed. We currently…

view full answer...

Answer 5

In the install instructions for the Curt hitch part #C13420 there is a diagram that shows exactly how to measure to make the correct fascia trimming but it does not come with a template so that was a poor choice of words by the installer in the…

view full answer...

Answer 6

Congrats on the new vehicle! To add a hitch with a 2" receiver to your 2021 Kia Telluride you will want the etrailer Hitch item #e45ZR. This hitch is custom fit and is guaranteed to bolt to your Kia with included hardware. I really like this…

view full answer...

Answer 7

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 8

As long as you have a 2 inch trailer hitch installed on your 2020 Kia Telluride like the Curt #C13420 the Curt Cargo Carrier part #C18109 would fit and work well. We don't have any video or pictures we can share that show the fit, but based on…

view full answer...

Answer 9

That is a great question. The #C13420 is the Curt brand hitch, while the #e45ZR is our etrailer branded hitch which is also manufactured by Curt. The main difference is that the Curt brand hitch uses a gloss black powder coating, while our etrailer…

view full answer...

Answer 10

The best hitch for your 2023 Kia Telluride is the etrailer Hitch item #e45ZR. This is a class III hitch that is custom fit and bolts to your Kia with included hardware. The reason I like this hitch is because of its hidden design. The only part that…

view full answer...

Answer 11

Don't worry, the spare tire on your 2022 Kia Telluride will be put back on once installation of the Curt Trailer Hitch Receiver #C13420 is complete. Overall the installation of this hitch is pretty straight forward and you don't need to be…

view full answer...

Answer 12

Congrats on the new SUV. To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Can A Bumper Plate Be Used Instead Of Trimming For A Hitch Installation On A 2020 Kia Telluride

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching