Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

See what our Experts say about this CURT Trailer Hitch

• Trailer Hitch that Fits 1991 Chevrolet G30 Mini Motorhome
  The Curt hitch part # C13016 would fit your 1991 Chevy G30 conversion van/mini motorhome and would fit easily so this would be a great option.
  view full answer...
• Trailer Hitch That Fits Motorhome on Class C Lazy Daze on 1983 G30 Chassis
  We have the Draw Tite hitch part # 41121 as a confirmed fit for your 1983 Lazy Daze Class C motorhome that is built on a G30 frame. We had a customer come back and leave a review for this hitch where they told us it fit really well on their G30.
  view full answer...
  
• Will the Curt Hitch C13016 for a Chevy Van Fit a 1991 Chevy G30 Roadtrek
  The Curt Trailer Hitch Receiver part # C13016 is only a confirmed fit for a 1978 - 1996 Chevrolet Van which excludes conversion models. The reason for this is because the conversion van models do not have the mounting hole for the bumper which is the front facing hole on the Curt Trailer Hitch Receiver closest to the receiver tube opening. I spoke with Curt and all they were willing to release is the distance between the two holes left to right which is 40.873". I recommend the Adjustable...
  view full answer...
• Installing Trailer Hitch on 1995 GMC Conversion Van with Aftermarket Bumper
  The custom trailer hitches we have available for your 1995 GMC G20 Van, such as the Curt Class III # C13016 that you were looking at, do indeed feature pre-drilled holes that are designed to line up to existing holes in the van's frame rails and bumper. If your van doesn't have the existing bumper bolts and nuts that are used to secure the front of the hitch you will need to drill into it (and obtain the necessary hardware) to make this connection. I really can't recommend passing this...
  view full answer...
• Can Curt Class III Trailer Hitch # C13016 Be Used with Weight Distribution System
  The Curt Class III Receiver Hitch # C13016 referenced in your question is indeed rated for use with a weight distribution system. When a weight distribution system like the Reese Steadi-Flex # RP66560 you referenced is used with the hitch its towing capacity increases to 10,000 pounds and its tongue weight limit increases to 1,000 pounds (compared to 6,000 and 600 respectively without a WD system). Please just keep in mind that you will still always be limited by the capacities of the...
  view full answer...
• Trailer Hitch Receiver Compatible with 1995 Chevy G30 Coachmen Camper Van
  The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13016 is a fit for your 1995 Coachman Class B camper van. It is a fairly easy installation bolting up in about an hour with the possibility of holes needing to be enlarged. I've linked the installation instructions to assist. If you will be towing with this hitch receiver, I recommend also using the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55338 for your wiring harness. Then you can use the Curt...
  view full answer...
• Trailer Hitch Solution for 1983 Chevrolet G30 Box Van
  Since your truck has a box van on it there is a solution for installing a hitch, but a custom fit one like the # C13016 would not work. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box van like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
  view full answer...
• 2-Inch Hitch for 1990 GMC Full Size Van Without Step Bumper
  We do have custom-fit hitches for the 1990 GMC full-size van without step bumper but these are all Class III types and they are shown on the linked page. No class IV hitches are offered. Two of the hitches, the USA-made Curt # C13016 and the Draw-Tite # 41121, are no-drill installations. I recommend the Curt # C13016 because of its higher 6K towing capacity and its concealed cross tube which gives it a cleaner installed appearance. The written instructions are linked. If you also need...
  view full answer...
• Receiver Hitch for 1989 Lazy Daze RV hitch Built on Ford Van Cutaway Chassis
  We have a few bolt-on hitches that could work with your 1989 Ford Cutaway Van Chassis, if the outside to outside frame width is around 42 inches. You'll also want to measure for the drop you need. The drop if the vertical distance from the underside of the frame members where the hitch would attach to the lowest portion of the back bumper. You'll want to choose a hitch with the proper amount of drop, so the receiver tube will clear the rear bumper. If the drop is 1-1/2 inches or less,...
  view full answer...
• Replacement Trailer Hitch Mounting Hardware For 1986 Chevrolet G20 Van
  I have an option for you, but the spacer block used for your 1986 Chevy G20 Van measures 1/4" x 1" x 2-1/2" and the closest option we have that is not sold as a kit is the Trailer Hitch Spacer Block # RP3022 which measures 3" Long x 1" Wide x 1/4" Thick and may not work in the frame without modification. Instead I recommend find which brand and model the trailer hitch receiver you are installing on your van is, and using Replacement Hardware Kit # RHK. You will need to enter the model...
  view full answer...