bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11435
lowest price pledge
Retail:$331.64
Our Price: $225.94
You Save: $105.70
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11435 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (52)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C11435

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • CURT
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11435 Curt Class 1 Trailer Hitch Receiver

Installation Details C11435 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11435

Average Customer Rating:  4.9 out of 5 stars   (51 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

Hitch installation was straight forward. It’s best to remove the muffler entirely rather than working with it dropped down and hanging. The hitch works perfectly with our 10 cu.ft. Yakima box attached to a DIY aluminum frame that I built attached to a 1.25” steel drawbar. We can now take 2-4 week road trips with ample storage




by:
2019 Mazda MX-5 Miata

Added a hitch on a 2019 Miata RF for a bike carrier on the rear that I can detach. Fit on the Miata is great, instructions were easy to follow, installed it in a single afternoon. Great item.




by:
2017 Fiat 124 Spider

Great 1 1/4 hitch. It is exactly what I need for my bike carrier on my 2017 Fiat 124. It's tucked under the number, so when the bike rack is not attached, you can't see it at all, which is nice.




by:

I mounted this hitch on a 2018 Fiat Lusso Spider. The hitch fit perfectly and is almost invisible. It was really easy to remove the muffler to install. I would have given 5 stars except that the Facia support brackets used for the Miata are not the same as what is needed, see picture, for the Spider. I fabricated my own brackets and all is well.




by:
2016 Mazda MX-5 Miata

OMG this was a sweet install. Superbly engineered and I was done in about 2 hours doing it solo.. Such small visibility and the paint job on it was outstanding, powdered coated? Instructions great, hardware was top notch, torqued the bajesus out of it no fear of snapping, and the bracket to hold the bumper trim was super solid. Could not rate any higher. Added a picture with my bike rack but mainly installed to pull a tag along trailer.


Comments
No issues. Working great.
Jeff - 04/30/2019


by:
2018 Mazda Miata

My installation was not for a Miata, but for my 2018 Fiat 124 Spider. The instructions were very clear and also apply to the Fiat. The muffler should be removed rather than just lowered, it makes the installation so much easier. The facia brackets that are included are Miata specific, they will not fit the Fiat. In time I will fashion some myself. The most time consuming part of this project was making the access holes larger, but even that only took about 10 minutes to do both. The clearance of the receiver to the light pod is not an issue for me since I am using this product for a bike rack. Some tips for installation
1. After fishing the carriage bolts into position, do NOT remove the fish wire until you are ready to put on the nut, it's easy to lose the bolt in the frame.
2. Install one side of the receiver at a time, it's heavy and nearly impossible to hold up to the frame to line up all four bolts.
3. Take off that muffler, you'll be glad that you did.
This is a great product, and ready to install. I highly recommend it.




by:

Well made, and came with the hardware needed to install it. Very specialized hardware for fishing the bolts through the frame. Very good instructions as well.




by:
Fiat

Designed and marketed for the Mazda MX-5 (ND), this hitch also bolts onto the Fiat 124 Abarth and Spider.

Ideal for bicycle racks, tire racks, and cargo trays. NOT recommended for heavy loads (greater than 300 pounds) or trailers.




by:

Quality product at a reasonable price. Installation idea was excellent and resulted in no need to read and follow written instructions




by:

The hitch was worth the long wait for it to be available. It was installed by professionals, and it has been a great help in transporting our e-bicycles.




by:

Hitch was not too difficult to install, but was definitely easier with two people. The instructions say to drop the exhaust, but it is easier if you remove the muffler all together, which is only two extra bolts.

It looks great installed, even with the extra bumper lip on the Club trim level. It sits very close to the bumper and looks very high quality when installed.




by:
2016 Mazda Miata

My order was delivered quickly and it installed very easily on my 2016 Miata. Special thanks to the eTrailer how-to video!




by:

So far so good. Installation was easy with the right tools. Fishwire system for install is super slick, works far better than it looks like it should. Really like the way this attaches to the frame - uses heavy duty hardware in shear (how bolts are designed to be used) and doesn't put bending loads on any frame welds like some of the more expensive options. Also like that it's all one piece instead of hideaway - the hideaway hitches wobble a lot when used with a bike rack or cargo tray.

Highly recommend, and as a bonus, it's cheap!


Comments
Still works great after a year, still highly recommend.
William - 04/26/2021


by:

It fits really nice. So far so good
Thank
you




by:
2016 Mazda MX-5 Miata

Installed on a 2015 MX-5 Club Sport (with factory ground effects) and a after-market Good Win Racing muffler. Used some inexpensive car ramps to have easier access underneath. Got some metal cutting bits online to grind the frame holes bigger (the only 'annoying' step) with my electric drill, which was easier than expected. Rest of the installation was a breeze. I found it easier to remove the muffler rather than 'lower it' as the instructions say. Once installed, everything fit factory perfect (someone suggested the Club Sport ground effects may require trimming, that's not true, it doesn't touch anything). Now, the GWR Muffler did 'touch' since it is a little fatter than factory. That was solved by going some longer/adjustable muffler hangers (lowering muffler 1 inch). Took about 30 minutes to install, plus 30 minutes messing with drill and making holes larger, and 15 minutes to remove existing muffler. That's being careful and patient. I'd say this install is a 6/10, not a 10/10. Single person not a problem.




by:

It's a trailer hitch installation was easy and it pulls a tailer




by:
2019 Mazda Miata

I installed this 1-1/4" hitch on my 2019 Mazda Miata RF and it works great for my Kuat Sherpa bike rack (that I also purchased at eTrailer; they have the best prices!). I generally only carry one road bike or one mountain bike on the rack, but it and the hitch seem very sturdy; much thicker metal than the lightweight Miata frame to which it is installed.

I opted to remove the bumper cover and the bumper and install the 4 bolts that way, rather than enlarge the holes in the car's frame with a die grinder or dremel as recommended by the instructions for 2 of the bolts. When you remove the bumper you will have access to the hollow "rails" that comprise the main structure of the car's frame, and it is very easy to put in the bolts into the existing holes without grinding any holes bigger than they were from the Mazda factory. You have to drop the exhaust/muffler to do this install (regardless of which approach you take for the bolts), but it goes back into its original position so nothing to complain about other than the usual rubber exhaust hangers being stiff and hard to remove by hand.

The install took a couple hours but was not very difficult; for some steps you may benefit from a pair of extra hands (like raising/lowering the bumper cover or the hitch itself while you get the first bolts in), but it's possible to do this install on your own in 2-3 hours.




by:
Fiat

I was unable to do the installation because it required dropping the muffler so I brought it to a shop. The beauty of the trailer hitch on my 2017 Fiat 124 spider is that it cannot be seen.




by:

Installation was ok,with the it was the usual foreign car stuff.Never used hitch,no longer have vehicle.Never had a problem with"Any Curt Products"..




by:

Quick delivery and easy install and it fits perfectly. What more can you ask for!




by:

The hitch installed easily. I did remove my muffler just so I had more room to install. Great product.


Comments
This hitch was a good price, super easy to install and it is perfect for my bike rack and towing my trailer with track tires and equipment.
Mike L - 07/12/2021


by:
2016 Mazda MX-5 Miata

Haven't yet installed the hitch, But it looks good. It will be barely visable.




by:
Mazda Miata

Extremely happy with the trailer hitch for the Miata MX-5. Instructions were very good and the product was absolutely top-notch. I will be using the trailer hitch for a bike rack and also for a carrier. I would not hesitate for a moment recommending this product because it is excellent.




by:

Looks awsome but it’s hidden . Could not be more happy. Easy install




by:
2019 Mazda MX-5 Miata

I wanted a trailer hitch for my new Miata. The etrailer website was simple to use in making my selection, and it was delivered within a week of ordering. I recommend using etrailer to anyone in the market for a hitch.



25
52
Show More Reviews

See what our Experts say about this CURT Trailer Hitch



  • Will Curt Trailer Hitch # C11435 be Visible after Installed on 2016 Mazda MX-5 Miata
    The Curt Trailer Hitch Receiver # C11435 referenced in your question is a Class I trailer hitch and is confirmed to fit your 2016 Mazda MX-5 Miata. The hitch will always be somewhat visible when looking at your vehicle from behind, whether or not it is being used. The installed hitch though will blend in nicely under your MX-5 along with the exhaust and frame. I have attached an image that shows what the MX-5 will look like with the hitch installed as well as the installation details...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch For A 2017 Fiat 124 Spider
    When installing a hitch on your 2017 Fiat 124 Spider Abarth The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # C11435 will fit and does not require any drilling for installation and bolts right up. The access holes may need to be enlarged by drilling, filing, or rotary tool, and the exhaust must be temporarily lowered for installation. There are no major modifications for the installation of this hitch. I attached an installation video link below.
    view full answer...
  • Availability of Trailer Hitch Receiver for 2018 Mazda MX-5 Miata (ND)
    The Curt # C11435 is confirmed to fit your 2018 Mazda MX-5 Miata (ND). This is a Class I hitch with a 1-1/4" receiver. It has a maximum gross trailer weight of 2,000 lbs and tongue weight of 200 lbs. Make sure to consult your owner's manual for your vehicle towing/tongue weight capacity since it is likely the limiting factor. This features a bolt-on installation and a limited lifetime warranty.
    view full answer...
  • Understanding the Towing Safety Information Table in Curt Hitch Instructions for a 2017 Mazda Miata
    It took me a couple of minutes but I finally found that table. That is actually in the instructions for the hitch # C11435 for the 2017 Mazda Miata. The table is laid out kind of weird. It does make it look like the top row of numbers is tongue weight. But that is the gross trailer weight and the tongue weight is usually 10 to 15 percent of that. So usually a Class I hitch is rated up to 2,000 pounds gross trailer weight and 200 pounds tongue weight. But with that said you also have to...
    view full answer...
  • Trailer Hitch And Wiring For A 2021 MX-5 Miata
    We do have an option for your 2021 Mazda MX-5 Miata, the Curt Trailer Hitch Receiver # C11435. This hitch is a class I trailer hitch that is capable of 2,000lbs GTW and 200lbs maximum tongue weight. You'll want to check your vehicle's owner's manual to see if your vehicle is rated for towing before attempting. If you are interested in wiring, we have the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56300 for your Miata. This will add lights to your towed...
    view full answer...
  • Trailer Hitch and Cargo Carrier for 2016 Mazda MX-5
    The Curt hitch part # C11435 is the correct fit for your 2016 Mazda MX-5 and would be the way to go for carrying a cargo carrier like the # C18145. We don't have an aluminum carrier that fits this hitch size but the # C18145 only weighs 29 lbs.
    view full answer...
  • Trailer Hitch Compatible with 2020 Mazda Miata MX5 RF Club
    The 2020 Mazda MX-5 Miata does have the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11435 as a fit. It is independently rated for towing up to 2000 lbs and up to 200 lbs tongue weight. Your vehicle is not rated by the manufacturer for towing, so you'd be towing at your own risk even though it is a small trailer. To install the hitch receiver, the fascia support brackets will be removed and replaced by manufacturer supplied brackets. No drilling required for installation...
    view full answer...
  • Kuat Sherpa that Can Fit Curt Hitch for 2020 Mazda MX-5
    Using a 1-1/4 inch to 2 inch adapter isn't my favorite solution for situations like yours as the adapters end up cutting the capacity of the hitch in half and also add quite a bit of movement. Since lighter duty vehicles like your 2020 Mazda MX-5 only have the 1-1/4 inch hitch size available the best recommendation I can make is a rack designed for this hitch size like the Sherpa that fits this hitch size part # SH12G.
    view full answer...
  • Recommended Trailer Hitch and Bike Rack for 2020 Mazda MX-5 Miata
    The trailer hitch I recommend for a 2020 Mazda MX-5 Miata is the Curt Trailer Hitch Receiver part # C11435 which is a direct bolt-on fit. I have attached an install video I did below. It will not void any warranties. It has a class I rating so as long as you are using a class I rated bike rack there won't be any issues. I recommend the Thule Helium Pro 2 Bike Rack part # TH9042PRO which is super lightweight and comes with locks for security.
    view full answer...
  • How to Connect a Bushtec Quantum II Trailer to a 2016 Mazda Miata
    To tow your motorcycle trailer with you 2016 Mazda Miata you will need both a hitch and a vehicle wiring harness. For the 2016 Miata, if you do not already have a hitch, them I recommend the Curt Trailer Hitch Receiver, # C11435.The hitch will install to your vehicle without any drilling or welding required. For a wiring harness, the Curt T-Connector Vehicle Wiring Harness With 4-Pole Flat Trailer Connector, # C56300 is confirmed to fit the 2016 Mazda Miata. The connector will plug into...
    view full answer...
  • Trailer Hitch For A 2021 Mazda MX-5 Miata
    For your 2021 Mazda MX-5 Miata, we have the Curt Trailer Hitch # C11435. This is a class I trailer hitch, that has a maximum towing weight of 2,000lbs, and a max tongue weight of 200lbs. If you're needing wiring, we have the Curt T-Connector # C56300. This is an easy to install, plug-and-play harness that will plug into your vehicle's factory wiring harness. Wiring is needed to be able to provide lights to your trailer while driving, that was you're compliant with the law and for safety. Finally,...
    view full answer...
  • Fit of Curt Class I Hitch C11435 on 2016 Mazda MX-5 Miata Club with Brembo/BBS Package
    According to Curt's fit guide their 1-1/4-Inch Class I Hitch # C11435 fits all versions of the 2016 Mazda MX-5 Miata. No fit exclusions are noted for the 2016 Club version with Brembo brakes, although the 2015 model year, according to my technical contact at Curt, did have some fit issues with certain trim packages. Your 2016 is a confirmed fit. The written installation instructions are linked for your reference along with a helpful article on hitch installation. Installing this no-drill...
    view full answer...
  • Bike Hitch & Bike Rack Recommendation for 2017 Mazda Miata RF Launch Edition
    For your 2017 Mazda Miata we have the Curt hitch part # C11435 as a confirmed fit that would work well. At one point Curt was very strict about requring a stabilizer strap with non-supported loads like bike racks but at this time they have softened on that and instead only recommend it. This is a 1-1/4 inch hitch and is the only size we have for your vehicle. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our...
    view full answer...
  • Would Kuat Sherpa Work Well with 2016 Mazda Miata with Curt Hitch Installed
    It can be a bit interesting fitting the stabilizer strap part # 18050 to a platform bike rack like the Kuat Sherpa part # SH22B but basically you have to run the strap from the trunk lid to the base of the rack where the rails meet shank of the rack. This would be an excellent bike rack though. Kuat makes some of the best bike racks available so I know you will like it with your 2016 Mazda Miata with Curt hitch # C11435 installed.
    view full answer...
  • Hitch and Bike Rack Recommendation for 2017 BMW X1 and Mazda MX-5
    For your 2017 BMW X1 the best hitch for carrying a bike rack is the Draw Tite part # 76018 as it does not require a stabilizer strap when carrying a non-supported load like a bike rack like the Curt hitch does. For your 2017 Mazda MX-5 we only have a Curt hitch like the part # C11435 which will require you to use the stabilizer strap part # 18050 when carrying a bike rack. Based on this I'd recommend you go with the hitch for the BMW. I really like the Saris Freedom Superclamp part #...
    view full answer...
  • Trailer Hitch for 2016 Mazda MX-5 Miata for Towing Jet Ski
    Yes, the Curt hitch part # C11435 is a confirmed fit for your 2016 Mazda MX-5 Miata and would have enough capacity for pulling a jetski trailer. It has a 2,000 lb capacity which would be more than enough. For trailer wiring you'd then need the part # C56300 which is a confirmed fit. This installs by plugging inline with the taillight connectors for an easy install. For a ball mount you'd then want the part # C45521 and ball part # A-80 and pin/clip part # F-4.
    view full answer...
  • Recommended Hitch Cargo Carrier for Spare Tire on 2018 Mazda MX-5 Miata
    There is not a hitch mounted spare tire carrier for your MX-5 compatible with the Curt trailer hitch # C11435 but I do have an alternative solution for you. You can use a compatible cargo carrier and we have the following to choose from: 17x46 Curt Cargo Carrier # C18145 19x47 Curt Cargo Carrier # C18110 20x47 Reese Cargo Carrier # 63155 The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11435 is the correct hitch fit for your 2018 Mazda Miata MX-5. You will also need...
    view full answer...
  • Ground Clearance Under Curt C11435 Installed on 2019 Mazda Miata
    I don't have a precise ground clearance measurement for the Curt Class I # C11435 (nor does Curt), but as you can see in the provided photo, the receiver tube will sit flush against the underside of the bumper fascia. If you measure approximately 2 inches downward from the lowest point of the bumper fascia, you'll have a pretty accurate idea of where the underside of the receiver would sit. If you'll be using the hitch for light-duty towing, you'll need a few other items to complete your...
    view full answer...
    Image 1 for
  • Will Curt Class I Trailer Hitch and Kuat Beta 2-Bike Rack Fit 2016 Mazda Miata
    The Curt Class I Trailer Hitch Receiver # C11435 is confirmed to fit your 2016 Mazda MX-5 Miata. This trailer hitch features a 1-1/4 inch hitch receiver that will work well with the Kuat Beta 2-Bike Rack # B202-114. This is a great, light-weight bike rack that will work well with the Curt # C11435 hitch on your Miata. Your local automotive repair shop will likely install the hitch for you. I've attached the installation instructions for you to look at to see if you think you're comfortable...
    view full answer...
  • Will Trailer Hitch Installation on 2019 Mazda MX-5 Miata Void Warranty
    You are actually covered by the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. This means that unless the Curt Trailer Hitch # C11435 that you referenced is the reason that you are needing repairs on your 2019 Mazda MX-5 Miata the dealer has to honor the warranty. If you...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chelsea B
Written by:
Chelsea B
Employee Chris R
Video by:
Chris R
Employee Schuyler H
Video by:
Schuyler H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830