We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 13389

110 Reviews | 32 Questions

In Stock

$319.78

Retail:$541.90

You Save: $222.12

Not Confirmed to Fit

2023 Chevrolet Bolt EV

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

CURT Visible Cross Tube Trailer Hitch - 13389

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

13389 - 2 Inch Hitch CURT For Towing on 2005 Dodge Grand Caravan

13389 - 4000 lbs WD GTW CURT Trailer Hitch on 2005 Dodge Grand Caravan

CURT Trailer Hitch - 13389 on 2005 Dodge Grand Caravan

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Visible Cross Tube 13389 on 2005 Dodge Grand Caravan

13389 - 4000 lbs WD GTW CURT For Towing on 2005 Dodge Grand Caravan

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" 4000 lbs WD GTW 13389 on 2005 Dodge Grand Caravan

CURT For Towing - 13389 on 2005 Dodge Grand Caravan

Show All (12) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (16) Customer Images

Show Fewer Customer Images

Videos

How to Install: Curt Trailer Hitch Receiver on your 2005 Dodge Grand Caravan

Beginner’s Guide to Installing the Curt Trailer Hitch Receiver on a 2006 Chrysler Town and Country

How to Install the Curt Trailer Hitch Receiver on a 2007 Chrysler Town and Country

Setting up the Curt Trailer Hitch Receiver on a 2007 Dodge Grand Caravan

Installation: Curt Trailer Hitch Receiver on a 2006 Dodge Grand Caravan

Towing or Hauling with your Minivan

Show All (6) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13389 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (110)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - 13389

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Standard 2" Receiver: Accepts a wide range of Class III towing and cargo accessories
Tows up to 3,500 lbs (GTW): Handles small trailers, campers, or utility loads safely
Holds up to 350 lbs (TW): Supports bike racks, cargo carriers, and ball mounts securely
Bolt-On Installation: Mounts to the frame using existing holes—no welding required
Powder-Coated Steel: Gloss black finish over base coat resists rust and corrosion

Features to know about

Handle Every Haul with Confidence: Class III Strength and 2" Receiver

When you need reliable towing power for trailers, small campers, or cargo carriers, this Curt Trailer Hitch Receiver delivers. It’s rated for a maximum gross trailer weight of 3,500 lbs and a tongue weight of 350 lbs. When used with a weight distribution system, capacity increases to 4,000 lbs GTW and 400 lbs TW. The sturdy, square-tube design gives it the muscle for light to moderate towing while keeping the load steady on the road.

Built to Last Through the Miles: Fully Welded, Powder-Coated Steel

This hitch is made from fully welded steel for lasting strength and stability. The gloss black powder coat finish sits over a protective base layer to guard against rust and corrosion. Whether you’re hauling gear through tough weather or storing it between trips, the durable coating helps maintain a clean look and long service life.

Simple Do-It-Yourself Install: Bolt-On Design with No Welding Required

You don’t need a lift or special tools to get this hitch on your vehicle. The bolt-on installation uses existing hardware and frame holes—no drilling or welding needed. Just line it up, torque it down, and you’re ready to roll. Clear instructions make it straightforward for anyone tackling a weekend project in the driveway.

Ready for Everyday Utility: Fits Common Accessories and Towing Setups

The 2" x 2" receiver opening works with most ball mounts, bike racks, and cargo carriers designed for Class III hitches. That means you can tow your small trailer one day and carry bikes or extra gear the next without hunting for adapters or specialized mounts. It’s an easy way to get more use out of your vehicle any time you need extra hauling space.

Specs

Dimensions

Receiver opening: 2" x 2"

Class Rating

Rating: Class III

Weight and Capacity

Maximum gross trailer weight: 3,500 lbs
Maximum GTW when used with weight distribution: 4,000 lbs
Maximum tongue weight: 350 lbs
Maximum TW when used with weight distribution: 400 lbs

Warranty

Limited lifetime warranty

13389 Curt Class 3 Trailer Hitch Receiver

Compare to Draw-Tite 75305

Installation Details 13389 Installation instructions

This Product Fits The Following Vehicles

2005 - 2007 Dodge Caravan with Stow-N-Go seats
2005 - 2007 Dodge Grand Caravan with Stow-N-Go seats
2005 - 2007 Chrysler Town and Country with Stow-N-Go seats

Customer Satisfaction Score:

92% were satisfied with this product

8% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Too difficult to install

8% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Too difficult to install

4.7

110 reviews

5 Stars		(89)
4 Stars		(11)
3 Stars		(5)
2 Stars		(3)
1 Star		(2)

by: Tom 03/16/2026

2006 Dodge Grand Caravan

Wiring kit was straight forward. The hitch was a struggle to install. This is not a reflection on etrailer, as I began, the installation of the hitch, discovered that the vehicle had a prior hitch and found broken bolts that was time-consuming to match and remove as well as the hitch itself seemed not to fit that well, but we were able to be successful.

by: Ray 06/20/2018

Nissan Leaf

Installation was somewhat difficult. The hitch was about a 1/2 in to narrow. I needed a piece of wood and a 3lb hammer to set the hitch in place. The attached photo shows the interference with the body flange.

It then took a specific bolt tightening sequence to get the holes to line up.
1. The most forward, single bolt was started.
2. The center alignment bolt for the leaf spring bracket had to be 3/4 tightened.
This step aligned the rest of the holes.
3. The rest of the bolts could then be installed.

I have not yet towed, but I'm confident the Hitch will pull my pop-up with no problems.

I will review the wire harness separately.

Click to Enlarge

by: Scott 12/20/2025 One Year Later

Works like advertised. Would be nice if they included a note on how to adjust the hitch (widen it) when it's slightly narrower than the car's bolt pattern. I called in and then they told me. Would have saved me an hour's struggle.

by: Karl R. 04/20/2020

Very fast shipping. Curt hitches are very good quality hitches. I have bought them before and they work great. Install was not hard but a little tricky. I definitely used and needed 2 people for the install. Everything fit perfectly once installed. The videos on etrailer were awesome to watch and made installation very easy. A word of advice: make sure to spray down the mounting bolts on your vehicle a couple of days before your install. Then try and pre-loosen them before your install day as well. This will make for a smoother install. (Actually I did this even before ordering the hitch to make sure my bolts would come loose and the install would be possible)

Click to Enlarge

by: Robert 05/22/2018

Chevrolet Colorado

Shipping from Missouri to Colorado was fast. I had the hitch shipped to a UPS terminal and when I arrived to pick it up it was pointed out to me that it had broken through the box in two places. Packing rates a C minus.
I installed the hitch as a solo effort made easier by getting the van up on jack stands and using my floor jack to position the rather heavy hitch. To say the fit is tight is an understatement. Eventually, everything went together but I had to get out the BFH to do some fine tuning.
The hitch hugs the rear bumper and is unobtrusive. If it weathers well I'll be quite pleased with the unit.

Click to Enlarge

by: Kenneth 06/15/2021

Quality hitch. Easy to install using existing bolts on van. Will be using bike rack and I have already tested it out. Works great and very solid.Highly recommend this product and etrailers information and videos help to pick right one for your application. Thanks etrailer!

Click to Enlarge

by: Michael 07/23/2020

2006 Chrysler Town and Country

Originally I ordered a different hitch thru U-Haul, but they said it was too difficult to install and they couldn't do it, so I came here and found this model. It fits perfectly. The product seems to be very well made. No hardware provided as it uses existing bolts already on car. I had it installed at local garage. They didn't want to do it, but I explained that the video showed it was easy, so they agreed to take a look. In the end they said it was difficult to get past springs, but they did it and I'm happy.

Click to Enlarge

by: James Vecchio 07/07/2020 One Year Later

I have never been so happy to have bought this product. Its has gone way past my expectations. Easy to install, and has held up and pull so much more then I ever thought it could. The staff at etrailer has been awesome, the service has been awesome, I will continue to do business here.

Click to Enlarge

by: George Diaz 06/23/2015

2005 Dodge Grand Caravan

2005 Dodge Grand Caravan with Stow N Go.Installation was a snap. Solid hitch.

Click to Enlarge

by: Glynn 04/24/2022

The Curt Trailer Hitch was a perfect fit. However, it was a struggle to mate the hitch flange for bolting. However, the two of us were working with close clearance and fitting the two ends in the area of the vehicle springs and spring mounts. Using a vehicle lift would have made the job easier. Instructions were easy to follow. It is a two-person job to install the hitch. The hitch is made of high quality and really looks nice!

Edwin W. One Year Later

4/25/2023

Great!

by: John 11/29/2017

2007 Chrysler Town and Country

I was able to install the trailer hitch in about 30 minutes as advertised. It's the best quality and best looking hitch I have ever had in my whole life. The only thing that would have better with the whole experience is if there would have been some written or physical instruction as to how maneuver the hitch into the proper position on the vehicle. Upon first inspecting the hitch my first instinct was "it will never fit, it must be the wrong one" After realizing that it would in fact fit with the proper manipulation my confidence was restored and it was a wonderful installation. Thank you very much!

John One Year Later

11/29/2018

I like it just fine. Its a wonderful product and Im going to be buying another one soon.

by: Jeffrey 09/14/2025

Very difficult to get into position just to get the attach bolts started into the frame. Multiple areas of the hitch need relief cuts and contours to allow hassle free positioning. But the biggest problem is the forward single bolt hole on both sides of the hitch does not line up with the frame hole. This hitch is 1/2 to 3/4 of a hole off. The holes on the hitch need to be moved forward by that amount. So at this point I have the 4 rear most bolts (2 per side )installed and I am unable to get either of the forward bolts installed. Not a good design. I expected better from a CURT product.

Click to Enlarge

Gwendolyn Y.

9/18/2025

Hey, Jeffrey. I'm sorry to hear how the install went for you. These hitches are made of a mild flex steel and sometimes because of their size and shape, sometimes trailer hitches get flexed during shipping or transport. I've included some information about flexing and how to get the hitch installed.

Helpful Links

faq-my-trailer-hitch-doesnt-fit.aspx

by: Nick C 02/08/2017

Dodge Grand Caravan

I wanted a hitch for my Grand Caravan to do be able to tow my small utility trailer, and maybe a pop-up camper. I purchased this model because of the choices I had this one should have been easiest to install. The installation of this hitch went easier than I expected. I had someone help me lift and position the hitch into place, which made the overall installation one of the fastest I have performed. I didn't even have to do much prying to get it to line up to the holes. The only complaint I have is due to the tight space this hitch was designed for, I get a little exhaust rattle now as there is only about a 1/4" of space between the muffler and hitch. Some of that could be due to the age and mileage of the vehicle, so I may need to do some adjusting of the exhaust system and replace worn hangers to see if that cures the issue. Other than that, I am very pleased with this product.

Laura E.

2/14/2017

Thanks for your business and review, Nick! I have great news! There is a helpful article available about alleviating exhaust rattle. That article may be found at the following link:

Helpful Links

faq-fixing-exhaust-rattle.aspx

by: Brian 06/14/2022 One Year Later

Everything good install of hitch wasn't going good at first had one side lined up and bolted slightly other side was a little off until I used a line up tool and it moved over the room I needed for bolts great fit wiring was easy highly recommend these

Brian One Year Later

6/16/2023

Still no problems

by: J D 04/21/2020

So far so good.
Installation on my 2005 Chrysler T & C was not as easy as the video suggested
Took it to a garage to be put up on the lift
Had to use a pry bar to get past the rear bushings
Once that occurred, it fit very well and up tight against the bumper

J D. One Year Later

4/22/2021

Fantastic. Works with all the accessories I use.

by: Chuck 11/17/2024

Perfect fit very well designed. I have a hoist which makes installation easier. If installing without a hoist I recommend putting the car on jack stands allowing the rear axle to hang down to give the needed clearance to install the hitch. There are four bolts on either side with three behind the leaf spring shackle and one forward of the shackle. This forward attachment point will require some twisting and adjusting angles to get it into position above the leaf spring. I lifted the hitch in at an angle with the passenger side close to the axle and the driver side to the rear getting the forward brackets of the hitch above the leaf spring before squaring up the hitch. As this hitch uses existing rear frame bolts you should verify that your bolts will loosen up before installing. I used Kroil penetrating oil on the bolts to loosen them a couple days before I installed. I installed by myself, but I recommend having and extra set of hands to make the job easier. I have this on hitch on my 2005 and 2007 Chrysler Town and Country vans.

by: Jerrie 05/01/2021

2006 Dodge Grand Caravan

First of all the hitch showed up five days earlier than advertised which was great! It took about thirty minutes by myself to install. I had the help of a floor jack to keep it in place while lining up holes and reinstalling bolts. Very pleased with how well everything lined up. Quality workmanship indeed!

Jerrie One Year Later

5/2/2022

Hitch looks like the day I installed it even though I live in an area where road salt is used. Hasn’t rusted like some cheaper models. I use it with a bicycle carrier carrying four bikes and it works great. I would definitely recommend this hitch.

by: Howard Chandler 06/21/2016 One Year Later

2001 Dodge Grand Caravan

I have purchased two trailer hitches over the past 4-5 years. Both were well built and can be installed by the buyer. The instructions are clear.
The first was for a 2001 Olds van and I had very little problems putting it on. This included wiring and all. I had to replace the van and got a Dodge grand caravan sxt. Due to the van frame the hitch had to be moved around frame parts and due to the weight of the hitch, I ended up having a shop install it.
It was just too heavy for a 75 year old man to install by himself. Both hitches were/are great.
I hauled an open uhaul trailer from Alabama to NC several times and then from Knoxville to Raleigh for several trips. I continue using the hitch to haul a small trailer locally for relatives.
Yes, if I have to trade vans again, I would order another hitch form etrailer.
Howard

by: Leigh 06/19/2022 One Year Later

2005 Chrysler Town and Country

After trying to get a hitch from uhaul (purchasing,waiting, being told finally they didn't have it afterall) I went online and found this one. The process was smooth and the hitch was delivered quickly. I paid uhaul to install it and was able to head out on my trip ther same day.
I used the hitch on my 2005 Chrysler town and country van to haul my two electric bikes from SoCal to Seattle and back. The trip was smooth, the hitch worked perfectly and a year later it still is going strong. Never any problems or concerns.

by: Raffal 07/17/2018

Nissan Leaf

The safest way to install is to use car ramps instead of jacking your vehicle . I don’t trust car jacks while I’m underneath the weight of a car.

Unbolt three bolts on each side of the spring leaf of your vehicle. Just need two people on each side to lift up and position then bolt it in. Otherwise you will have a hard time installing on your own.

30 minutes. Easy install.

Saved a lot of money. Most hitch install shops wanted $400 and up.

by: Dan R 06/13/2017

Dodge Grand Caravan

Very satisfied. This is the third trailer hitch that I have ordered from etrailer.com in the past several years. I've installed them on two Subaru's and this time I needed one for a Grand Caravan. This was the easiest installation yet.
I am not a mechanic. I can do basic car maintenance like changing oil, tires, and I've done a few brake jobs. I also don't have a garage to work in. I did the job in my driveway. Backing the van onto ramps gave me more clearance to work underneath, but wasn't necessary. Most important is having the right tools. Sockets with a long extension is essential. Wrenches won't work. Also, safety glasses to keep dirt out of your eyes!!
I did the installation by myself, so it also helped to have a floor jack to hold the hitch in place while I started the bolts. It is heavy. But the hitch fit perfectly with no struggle. I read in a previous review to make sure the hitch is flush against the frame before you start to tighten the bolts so you don't strip them. I couldn't get it completely flush at first but I did snug each bolt slowly and evenly until it seated properly. I also sprayed each bolt and the holes with WD 40. They don't give you bolts, you have to remove and reuse the existing ones, and mine were a bit rusty.
From start to finish, it took about 90 minutes, but it would have been faster if I had all my tools at hand and didn't have to go back and forth to my cellar to get things that I needed.
I haven't towed with it yet, but I'm confident it will pull my little pop-up camper with no problems!!

by: David 01/07/2019

2005 Toyota Prius

this is the second tow hitch I have purchased from your company. Again, the install time is totally unrealistic! Took 3 hours to get it in. used 2 floor jacks, jack stands, 3lb sledgehammer and beat most of the paint off both sides to get it in. V shaped brackets would not fit around the leaf springs in the back. It almost like you are getting it right and then running through the furnace to bake the paint, which then moved metal supports. It will start rusting immediately where I had to beat it in, It was off about 4 mm, from fitting. it will start rusting immediately from me having to beat it in with the sledge. had to beat in the last one also on the prius. I think you need to check the fit after the oven baking process.

by: Britt P 03/19/2017 One Year Later

2005 Dodge Grand Caravan

The hitch and wiring harness I bought from etrailer has made my van so versatile. I am constantly towing a trailer for my business. Ordering was simple with an easy to navigate website. I would recommend them to anyone.

by: FloydPhillips 08/05/2020 One Year Later

After finally getting the right hitch for my vehicle, I have been very happy with it. I recently hauled a very large trailer that was likely oversize for my minivan, so much so that I could not go over 65 on the freeway. But I had no problems whatsoever with the hitch. I am quite satisfied with this purchase and if I have to switch vehicles I will likely want to get another one here.

by: John 05/10/2024 One Year Later

Mounted to 2007 Chrysler T&C. Installation a little fiddly (have crow bar/helping hands) but very routine (4 bolts). Installed by myself holding up w/leg. I'm sure you could hang the van from this hitch. Super strong, nice welds. Use to pull assorted trailers. Thanks George!

110

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Having Trouble Installing The Curt 13389 On My Town And Country
Hey Donald, It is a weirdly positioned bracket and bolt hole on that vehicle and hitch # 13389. I have attached a video of us installing on that vehicle to show a better idea of how we got it into position. I will say it is not smooth like butter but I hope this video helps show a little bit better how the installation is supposed to go,
view full answer...
Trailer Hitch that Fits 2007 Dodge Caravan with Stow N Go Seating
The Curt hitch # 13389 is the correct fitting hitch for your 2007 Dodge Caravan with stow n go seating. The other two hitches fit different vehicle variations. I attached an install video for this hitch on a 2007 Town and Country similar to yours.
view full answer...
What Vehicles Does Curt Hitch # 13389 Fit
The Curt hitch part # 13389 fits the following vehicles: 2005 - 2007 Dodge Caravan with Stow-N-Go seats 2005 - 2007 Dodge Grand Caravan with Stow-N-Go seats 2005 - 2007 Chrysler Town and Country with Stow-N-Go seats
view full answer...
Looking For Instruction Manual for Curt T-Connector C55537
Hello Gail, thanks for reaching out, and happy new year! I went ahead and attached a screenshot of the instructions for the Curt # C55537 for you. You will also find the instructions linked below. It opened up fine for me so it should open for you using the link below. As far as the hardware for the hitch, the Curt Trailer Hitch Receiver # 13389 you ordered does not include any hardware. This is because the necessary bolts are already present in the frame. As long as they have not been...
view full answer...
How Long Does it Take to Install Curt 13389 Hitch 2007 Dodge Grand Caravan
Oh wow! What made it take so long? Was their any particular step that was super difficult?
view full answer...
Trailer Hitch Recommendation for a 2007 Dodge Caravan with Stow-N-Go Seats
I recommend going with the Curt Trailer Hitch Receiver # 13389 because it's the only 2" hitch receiver option that is compatible with the Stow-N-Go seats on your 2007 Dodge Caravan. By installing the 2" hitch receiver you'll be able to use a wider variety of accessories. Attached is an installation video of this on a 2007 Grand Caravan that you can check out. Since most people who install a hitch on a Caravan are looking to use it for towing you'll also need the T-One Wiring # 118300...
view full answer...
Recommended Trailer Hitch Receiver and Towing Components for 2006 Dodge Caravan/Grand Caravan SXT
The 2006 Dodge Caravan/Grand Caravan has a towing capacity dependent on the tow package and engine size. The 3.3L V6 can tow 2,000 lbs without or 3,600 lbs with the towing package. The 3.8L v6 can tow 2,000 lbs without or 3,800 lbs with the towing package. Your SXT model has a towing capacity of 3,700 lbs. If you have stow-n-go seats, I recommend the Curt Class III # 13389 for your trailer hitch receiver. If you do not, then I recommend # C13362. For your trailer wiring, I recommend...
view full answer...
Recommended Wiring Harness and Towing Set Up for a 2007 Dodge Caravan
If you are asking me if there is a Curt wiring harness for your 2007 Dodge Caravan there is one. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C55537. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the tail lights. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118300 you were looking at over the Curt. Tekonsha makes a far superior product and their...
view full answer...
Difference Between Hidden Hitch # 87719 and Curt # 13389 Class III Hitch on 2006 Dodge Grand Caravan
The differences between the Hidden Hitch Class III Hitch, # 87719, and the Curt Class III Hitch, # 13389, are very minimal. The Draw-Tite Hitch, # 75305, is going to sit approximately 11-3/4 inches from the top of the receiver to the ground. The Curt Hitch, # 13389, is going to sit approximately 12-1/4 inches from the top of the receiver to the ground. The benefit to this hitch is that it installs in about half of the time as the other. If you are in need of a 4 bike rack, I recommend...
view full answer...
Recommended Trailer Hitch for 2006 Chrysler Town and Country with Stow-N-Go Seats
There is a hitch that fits your 2006 Chrysler Town and Country but the one you referenced is not. Instead, a similar hitch that does fit your '06 Chrysler with Stow-N-Go seating is the Curt # 13389, which is a Class III hitch with a 2" receiver that has a 3,500 lb towing capacity and 350 lb tongue weight capacity. This is a complete bolt-on installation so no drilling into your van's frame is going to be required. To add a 4-way that will power your trailer's lights you need Wiring Harness...
view full answer...
Can Hidden Hitch Trailer Hitch # 87717 Fit 1998 Plymouth Grand Voyager and 2007 Dodge Grand Caravan
If you have theDraw-Tite Max-Frame Trailer Hitch # 75119 on your 1998 Plymouth Grand Voyager, you will be happy to know that it does fit your 2007 Dodge Grand Caravan as well, providing your Dodge does NOT have the stow and go seating. If your Dodge DOES have the stow and go seating then the Curt Trailer Hitch # 13389 is the correct hitch for your minivan. Hitches can be swapped out between vehicles, however, the attachment hardware is not meant to be reused under any circumstances. Replacement...
view full answer...
Complete Towing Set up for 2005 Dodge Caravan
I have a solution for you but to answer your question, no that hitch will not fit a 2005 Dodge Caravan. That hitch isn't in our system but it looks like it is a uhaul hitch receiver for a Subaru Forester. I have two options for you depending on whether or not your buddy has the stow-n-go seats in his van. If he has the stow-n-go seats you're going to want the Curt Trailer Hitch Receiver 2" item # 13389. This is a class III hitch with a maximum gross trailer weight of 3,500 lbs and a maximum...
view full answer...
Can 2006 Dodge Grand Caravan SXT 3.6L Tow a 2,200 lb Trailer in the Mountains
That's a bit of a loaded question but I will line up my responses with your questions to try to help keep everything organized. Since you will be towing in the mountains I would say give yourself a larger cushion when it comes to towing capacity simply because the thinner mountain air will have an affect on the performance of any vehicle, especially when pulling a load. The actual max trailer weight rating for your 2006 Dodge Grand Caravan SXT 3.6L can vary on whether you have the tow...
view full answer...
Can 2007 Dodge Caravan with Curt Hitch # C12289 Tow a Car Trailer and Sportscar Weighing 1700-lbs
According to my research the 2007 Dodge Caravan with Stow-N-Go seats has varying towing capacities depending on the version. The SXT with 3.8L V6 engine has a maximum tow rating of 3800-lbs while the C/V and SE versions with the 3.3L engine have a maximum tow rating of 2000-lbs. The Curt 1-1/4-inch Class II hitch you referenced, part # C12289, itself has a towing capacity of 3500-lbs. We also offer a 2-inch hitch from Curt, part # 13389, which has the same towing capacity. For reference...
view full answer...
Hitch Recommendation for 2005 Chrysler Town and Country with Stow-N-Go Seating
The Curt Hitch - 2" # 13389 fits 2005-2007 Chrysler Town and Countrys with stow-n-go seating. While we do have other brands that fit your vehicle, we unfortunately do not have any models that install with a hidden crosstube. Those other options are the # C12289, and the # e39KR. All of these options have visible crosstubes. Out of all of these hitches, I recommend going with the # 13389 you were looking at. This is because since it is a 2" hitch, it is compatible with a wider range of...
view full answer...
Comparing Curt # 13389 & Hidden Hitch # 75305 Class III Hitches for 2005 Dodge Grand Caravan
Both the Curt # 13389 and the Draw-Tite # 75305 are confirmed fits for your 2005 Dodge Grand Caravan with Stow-N-Go seating and both share the same tongue weight (TW) and gross trailer weight (GTW) ratings of 350-lbs and 3500-lbs. If used with a weight distribution system both hitches' capacities increase to 400-lbs TW and 4000-lbs GTW. The installation difficulty ratings for these two hitches differ really only because those ratings are determined by each manufacturer and there is some...
view full answer...
Recommended Trailer Hitch for 2007 Chrysler Town and Country with Stow-N-Go Seats
I recommend using the Curt # 13389 because of the quality of the powder coat on the Curt hitches compared to some of the other available hitches. This is a Class III hitch with a 2" receiver and is a confirmed fit on the 2007 Chrysler Town and Country models with the Stow-N-Go seats. If you're going to be towing a small trailer with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For a wiring harness I recommend using the Tekonsha T-One # 118300 because of the...
view full answer...
Towing Capacity and Trailer Hitch and Wiring Recommendations for a 2005 Dodge Grand Caravan StowNGo
Curt trailer hitch # 13389 is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight (4,000/400 when used with weight distribution). If your 2005 Dodge Grand Caravan is rated as high then it can tow a boat/trailer up to the values specified above. If the van is rated lower you have to go by the van's rating. And if the van is higher you have to go by the hitch rating. Always go by the lowest rated component. If you are not sure about the towing capacity of your van take...
view full answer...
Install of Curt Trailer Hitch on 2007 Chrysler Town and Country
I have added a cut out of the linked installation instructions showing the torque specs for the Curt Trailer Hitch Receiver # 13389. Additionally, I have added a link to an installation video of this hitch on a 2007 Chrysler Town and Country which will walk you through the process.
view full answer...
Is There a Trailer Hitch Receiver For a 2006 Braun Entervan On a Chrysler Town and Country
The only receivers we have for a 2006 Chrysler Town and County with the clearance on the right side for the exhaust are for the non Stow-N-Go models # C13362. This design is completely different than the style use with Stow-N-Go # 13389. You will likely need to have a custom receiver fabricated for your Braun Entervan. I recommend contacting a local fabrication shop and showing them both receivers to determine if they feel they will be able to modify either receiver or if they will need...
view full answer...
Fitment of Hitch for 2016 Dodge Grand Caravan
We have the part you need but, the Curt # C12362 and # 13389 are the proper part numbers for a 2007 Dodge Grand Caravan and these will not fit a 2016 Dodge Grand Caravan. There was a generational change made between these year models. You need the Curt Trailer Hitch Receiver, # 13364 for a 2016 model year Dodge Grand Caravan.
view full answer...
Swing Away Hitch Extender For 2005 Grand Caravan
I have a solution for you. If you need a hitch receiver I suggest the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13389 to mount to your 2005 Dodge Grand Caravan. For your 2016 Ford Explorer I suggest the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98867. I recommend the Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches # SAR36VR. It has a max weight capacity of 250 pounds including the accessory you are using. So if...
view full answer...
Curt Hitch Recommendation for a 2004 Dodge Grand Caravan
The Curt Hitch part # 13389 that you referenced has been confirmed as a fit for your 2004 Dodge Grand Caravan so I would recommend it for you. I attached a video that shows the hitch being installed on a 2005 model just like yours for you to check out. The install process will be the same on your vehicle.
view full answer...
Can a Trailer Hitch Receiver On a 2005 Dodge Grand Caravan Fit On a 2017 Grand Caravan?
The etrailer Trailer Hitch Receiver # e98854 will fit all trims of the 2008-2020 Dodge Grand Caravan. The 2005 Dodge Grand Caravan used a different receiver design. The Curt Trailer Hitch Receiver # 13389 was specific to Stow-N-Go seats while the Curt Trailer Hitch Receiver # C13362 fits without Stow-N-Go seats. I recommend installing the Curt Vehicle Wiring Harness # C56331 when you install the receiver. This 4-way flat connection will control the lights on most small trailers and...
view full answer...

< Previous

Next >

Do you have a question about this Trailer Hitch?

Info for this part was:

Test Fit:

Joe V

Test Fit:

Nicholas E

Test Fit:

Rick A

Test Fit:

Randy B

Video by:

Andrew K

Video by:

Andrew L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Video Edited:

Joshua S

Video Edited:

Mike H

Video Edited:

Dustin K

Video Edited:

Sue W

Video Edited:

Chris R

Updated by:

Wilson B

Updated by:

Amanda M

Updated by:

Jenny M

Updated by:

Kristina F

Updated by:

Michael B

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.