Looking For Instruction Manual for Curt T-Connector C55537
Updated 11/03/2025 | Published 01/01/2025
Products Featured in This Question
Question:
55537 CURT T-Connector - 4 Wire : the link for installation details will not open for me. Could you send me the information or tell where I may look for it? My husband received this for a Christmas present and just opened the box this morning. Also my husband is concerned because there was no hardware to install the hitch. He is afraid the bolts that are in the van may need to be replaced and does not know what to get to replace them. At 77 years young he is a worrywart. Lol. We appreciate your advice on this and are very pleased with your company. This is the second trailer hitch we have bought from you with fast shipping and wonderful support personnel to help us old people. Thank you for your time
asked by: Gail G
Helpful Expert Reply:
Hello Gail, thanks for reaching out, and happy new year! I went ahead and attached a screenshot of the instructions for the Curt # C55537 for you. You will also find the instructions linked below. It opened up fine for me so it should open for you using the link below.
As far as the hardware for the hitch, the Curt Trailer Hitch Receiver # 13389 you ordered does not include any hardware. This is because the necessary bolts are already present in the frame. As long as they have not been previously removed, they should not be rusted or corroded and should be fine to use. If the bolts are no good, you can get a suitable grade 8 bolt at a local hardware store or auto parts store. I am not quite sure what size the OEM bolts are but if you remove one and take it to the store it shouldn't be too hard to find a match.
Feel free to reach out if you need anything else.
(click to enlarge)
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Installation of Draw-Tite 75305 Class III Trailer Hitch on a Chrysler Town & Country
- Q&A: Does the Advent Air Roof RV Air Conditioner ACM135B Come with the Ceiling Control Panel
- Q&A: Trailer Hitch Receiver Fit For 2005 Chrysler Town and Country With Stow-N-Go Seats
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Q&A: Parts Needed to Flat Tow a 2017 4WD Ford Explorer
- Q&A: Recommended Flat Towing System for 2017 Ford Explorer FWD with 3.5L
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Rooftop Cargo Carriers
- Article: Troubleshooting Brake Controller Installations
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
Jesse M.
11/3/2025
Hey Gail, did the link for the Curt T-Connector instructions open up for you this time? I’m also wondering if your husband found the right bolts for the hitch. Sharing how it went could help others working with the same setup.