Performance Tool Pump with 22" Flex Hose - 5 Gallon

Video Transcript for Hands-On with the Performace Tool Pump with 22" Flex Hose

Today, we're going to take a look the Performance Tool Pail Pump with this 22-inch flex hose. Now, this part is designed for transferring transmission fluid, mild chemicals, motor oil and even water based solutions. Using this pump will help reduce mess and heavy lifting that you always get from a transfer pour. So, if you're trying to chemicals use your fluids, using buckets, you get a mess involved. This will make it much easier.It is designed to fit into a standard five-gallon bucket, and the 18-inch length on this body of this pump will also fit smaller containers. When you do pull the handle, each stroke it'll get you eight fluid ounces.

If you notice, it has this translucent flexible 22-inch long discharge hose. Connects to this top half-inch barb inlet. Notice it does include the hose clamp, that when you do push it on there, you can tighten that down to hold it into place.The very bottom, this suction inlet includes also a half-inch barb. Then if you want to hook an additional to that.Give you a few overall dimensions on this. Overall length from the end of the suction inlet to the handle, you put a ruler on that, it's going to be right at 21 and 3/4 inches.

And the handle itself, when you pull it out, measurement of that from here to the end of the handle going to be right at 15 and 1/2 inches.But that should do it for the review on the Performance Tool Pail Pump with the 22-inch flex hose.