Are the Gooseneck Hitch Balls the Same for a GM and Ram Puck System

Updated 04/18/2026 | Published 05/15/2020

Products Featured in This Question

Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches - 2-5/16"

(164)

$158.65

Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball

(164)

$205.58

Question:

Is the ball interchangeable between GM and Ram puck System

asked by: Darrell V

Helpful Expert Reply:

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part # C60629 which has a rise built-in or the Curt Pop-In Ball part # C60601 which does not.

expert reply by: Conner L

Scott

1/17/2026

my b and w gosse neck ball goes down into my chevy puck hole but has so much play it makes alot of chucking . anyhelp plsss

Jerred H.

1/18/2026

@Scott GM's factory puck systems are designed with slight looseness to prevent the ball from seizing in the under-bed receiver so some play is normal and not a defect. It could also be dirty or have been damaged. How old is your B&W gooseneck ball and has there always been this much play in it? Are there any visible signs of damage?

Scott

1/19/2026

@JerredH hi the ball is from 2015 its was new i never used it till 2 yrs ago in a 21 chevy daully . we have a klot of chucking seen last sep. put the brace filler in for spacer and that did work