See what our Experts say about this Fulton Trailer Fenders

• Trailer Fender for Boat Trailer with 14 Inch Wheels
  The most important measurement is the mounting bracket slots and the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 fit 14 inch wheels and measures 30-1/4 inches from inside to inside for the mounting brackets, which do not come with the fenders and you would need to fabricate. I have added a cutout showing all of the dimensions of these fenders so you can see if they will work for you, as they are the closest we have to the measurements you provided. I have also...
  view full answer...
  
• Measuring to Determine Correct Replacement Trailer Fender Size
  The Fulton Single Axle Trailer Fender # F008583 also comes in white, # F008573 and silver, # F008593. The mounting bracket slots are 28 inches apart inside to inside. This measurement will matter more than the overall length of 40 inches. If you find you need the larger size for 14 inch rims the parts are: Black # F008584-2 White # F008574-2 Silver # F008594-2 The fenders for 14 inch rims are sold as a pair. The mounting brackets are spaced 30-1/4 inches apart inside to inside.
  view full answer...
• Replacement Trailer Fenders That Are 42-1/2 Inches Long
  I did get the photos and we do have trailer fenders that are 42-1/2 inches across, or more specifically, 42-5/8 inches, the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2. The important measurement is also the 30-1/4 inches between the mounting bracket slots, which you'll also need to measure, as you can see in the cut out I added with the dimensions of the fenders. They are a fit for trailers with 14 inch wheels, and I have added a link to a video review for you...
  view full answer...
  
• Plastic Fenders for a Spartan Boat Trailer
  This is a common issue with the old Spartan Trailers. Unfortunately we do not have any fenders with that kind of mounting style. The Fulton Single Axle Trailer Fenders # F008574-2 (for white) or the Fulton Single Axle Trailer Fenders # F008584-2 (for black) are three step style plastic fenders for 14" wheels. These along with any option that we would have, would likely require some fabrication. I have added a diagram showing all of the dimensions of these fenders so you can see if they...
  view full answer...
  
• Replacement Fender Options for Shorelandr SLB23LW Boat Trailer
  I do have an option for you but we do not carry Shoreland'r branded boat trailer parts. However, I was able to do some research on your boat trailer and came back with the Fulton Single Axle Trailer Fenders part # F008574-2. These are not an OEM replacement but they will still work for you nonetheless with very little to no modifications. If you have lights on your existing trailer fenders and you want to reuse them you would need to transfer them over to the new fenders which might require...
  view full answer...
• Replacement White Fender for a 2000 Shorlandr Profile
  You will want to base your replacement fender off of the size of your wheel. From the picture that you sent in it looks like you have a 14 inch wheel. For that I recommend going with the Fulton Single Axle Trailer Fender with Top and Side Steps # F008574. This is a white, plastic fender that has steps and is compatible with your 14 inch wheel. It has a 300-lb weight capacity and comes with a 5-year limited warranty. If you would like to replace both fenders so that they match then you...
  view full answer...
  
• Replacement Single Axle Trailer Fenders That Measure 42" Long With 30-1/2" Between Mounting Brackets
  Based on the dimensions you gave me it looks like the Fulton Single Axle Trailer Fenders in White # F008574-2 or Silver # F008594-2 are what you are needing. These have a overall length of 42-5/8" with a measurement of 30-1/4" between the mounting bracket holes. These are designed for a 14" wheel and tire, so the trailer manufacturer may have just used them if they also offered the trailer with the larger wheel and tire combination.
  view full answer...
• Recommended Trailer Fender and Lights for Boat Trailer with 13" Wheels
  You can use the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 which are designed to be used with wheels up to 14" large, so they'll work with your 13" wheels. To mount these fenders you'll want to use the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic # PF775-BKT-2; you could also use the existing brackets you've got on your trailer if you'd like. For the lights, you can use the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle...
  view full answer...
  
• Replacement Fender for Karavan Boat Trailer US-2800-74
  I looked up the fender part number you mentioned and while the info was pretty limited I was able to determine that the Fulton fenders part # F008574-2 would be a suitable replacement and would work great.
  view full answer...
• Trailer Fender Recommendation for 1990 Shorelandr Trailer
  The Fulton Single Axle Trailer Fenders with Top and Side Steps - White Plastic, # F008574-2, are a pair of fenders that are designed for a single axle trailer with 14 inch wheel. These are very close to the fenders you submitted a picture of as well. The overall dimensions of the fenders is 9-5/8 inches wide x 42-5/8 inches long x 12-3/4 inches tall. The top step measures 8 inches wide. We do not have any reference for replacement parts for the Shoreland'r trailer. If the measurements...
  view full answer...
  
• Replacement Fenders for 2002 Escort Trailer
  The Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 is designed to fit trailers with 14" wheels. This means you should not have a problem using the fenders with your trailer. These are designed to use the existing hardware or brackets you already have for your existing fenders for installation. If you are unable to use the existing mounting method, fabrication of mounting brackets may be required. I recommend measuring your current mounting brackets to see if they...
  view full answer...
  
• Can Fulton Trailer Fenders Be Used on a Shorelandr Trailer Where Holes Don't Perfectly Match Up
  When installing new trailer fenders you don't have to match up the mounting holes perfectly. Typically there is a bit of fabrication needed to install new fenders. What most people do is drill new holes in the fender or some move the brackets on the trailer.
  view full answer...
• Marker Light Recommendations for Fulton Plastic Fenders
  For the Fulton plastic fenders we recommend the Left Fender Clearance Trailer Light # BA44FNL and the Right Fender Clearance Trailer Light # BA44FNR.
  view full answer...
• Replacement Fenders Recommendation For Champion Boat Trailer
  We offer two fenders that have dimensions you may be able to work with for your Champion boat trailer. The first fender I recommend is the Fulton Single Axle Trailer Fender, part # F008594. This is a Silver polyethylene material that measures 9.7 inches wide X 43.4 inches long, and is 12.75 inches tall. This fender features both a front and a rear step and has a weight capacity of 4 inches. This fender is designed to work with 14 inch wheels. For two of these fenders you would order part...
  view full answer...
• White Trailer Fenders and Lights for a Bay Liner Trailer with 13" Wheels
  I do have an option for you, but we do not have fenders that already have the lights on them. We do have the Fulton Single Axle Trailer Fenders # F008574-2 which are white and work with wheels up to 14", so they will work with your 13" wheels. You can then add a light using the Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A65PB and the GloLight Thinline LED Trailer Clearance or Side Marker Light # MCL165RB for red or the GloLight Thinline...
  view full answer...
• Submersible Red and Amber Fender Running or Side Marker Lights for Fulton Fender # F008574-2
  I went out to the warehouse to measure the fenders # F008574-2 for you. The angled portion is 5-1/4 inches by 2-7/8 inches, so you could absolutely add a light there. We don't have the exact light measurements you gave but we do have other submersible options. My recommendation is the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens # MCL65A24B and Red Lens # MCL65RB with Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance...
  view full answer...
  
• Replacement Plastic White Fenders for Boat Trailer
  There is a fender which may work for you in the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2. These are white plastic fenders that are 42-5/8" long x 9-5/8" wide x 12-3/4" tall. They have an 8" wide top step and weight capacity of 300 lbs, though no cutouts for lights.
  view full answer...
• Solution For Plastic Tandem Axle Fenders
  You can still use the # F008574-2 you were looking at even though they're designed for a single axle trailer. What you will need to do is slightly modify them by cutting the step on one side so they can go together. Since our tandem axle fenders are all aluminum or steel this is the best solution. We have had customers do this in the past and it works really well. See the picture below.
  view full answer...
  
• Availability of Fulton 14" Wheel Plastic Fenders in White
  The closest we have to the Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels # F008554 in white is the Fulton Single Axle Trailer Fender with Top and Side Steps - White Plastic - 14" Wheels # F008574 which has the side steps. This is also available in a pack of 2 as part # F008574-2. This white fender is essentially the same as the black one you were looking at, with the only difference being the side step. The fender has a weight capacity of 300 lbs and the...
  view full answer...
• Recommended White Plastic Trailer Fenders That Will Fit 14" Wheels
  The closest white plastic fenders we offer that will work with the 205/75R14 tires on your trailer is the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 which are 9-5/8" wide x 42-5/8" long x 12-3/4" tall due to the side steps. You will also need the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender # PF775-BKT-2 if your current fender brackets are in bad shape. I included a video of the # F008574-2 for you to take a look at.
  view full answer...
• Picking Out Replacement Fenders for 1995 Single Axle Escort Trailer
  I looked up pictures online of your 1995 single axle escort trailer and it appears the trailer had plastic fenders similar to the # F008574-2 from Fulton. This is the correct kit for 14 inch wheels like it appears you have as well but I couldn't verify that on your trailer. If you need a different size though I attached a link to a page that has all of the white plastic fenders we offer as well.
  view full answer...
• Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 Bracket Kit
  The recommended mounting brackets for the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 that you referenced is the bracket kit part # CE26061G which we have found works well.
  view full answer...
  
• Will Fulton Single Axle Trailer Fenders Work With 205/75R14 Tires
  Hi William; yes, I would expect the Fulton Single Axle Trailer Fenders # F008574-2 to be compatible with 205/75R14 tires. These are designed to work with 14" rims. I suppose if you mounted the fender incredibly low on top of the tire with no clearance it wouldn't fit (this may be the case with the fender/tire in that review) but we are assuming it is properly installed. If the dimensions match or are comparable to your current fenders I would say you're good to go.
  view full answer...
• Can Caravan 14" Fenders Be Replaced with Fulton 14" Plastic Fenders
  The Fulton Single Axle Trailer Fender with Top and Side Steps # F008574-2 has mounting bracket slots spaced 30-1/4" apart and these slots measure 4-1/8" wide. They are designed to work with mounting bracket like part # CE26061G-2 so if your mounting brackets for your Caravan fenders match up with these specs then you are good to go. Otherwise you'll need to relocate or install new mounting hardware to match the specs of the Fulton fenders. Attached are some videos for you to check out.
  view full answer...