Submersible Red and Amber Fender Running or Side Marker Lights for Fulton Fender # F008574-2
Updated 04/26/2019 | Published 04/25/2019
Products Featured in This Question
Question:
Submersible fender running lights for F008574-2 Current boat trailer fender light measurements are 3-1/2inch long x 2-1/4inch tall and they mount on the angle portion of the fender. Will this fender take the same size light? If so, do you carry a submersible amber and red light in that size? Any suggestions would help. Thanks.
asked by: Eric M
Helpful Expert Reply:
I went out to the warehouse to measure the fenders # F008574-2 for you. The angled portion is 5-1/4 inches by 2-7/8 inches, so you could absolutely add a light there. We don't have the exact light measurements you gave but we do have other submersible options.
My recommendation is the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens # MCL65A24B and Red Lens # MCL65RB with Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A65PB.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Size Difference Between 4.80-12 Tires and 175/80-13 Tires
- Q&A: How to Choose Correct Boat Trailer Fenders
- Q&A: Recommended 5.30-12 Radial Trailer Tire with Wheel
- Q&A: Can 5.30-12 Trailer Tires on 4 Wide Wheels Fit in Place of 5.30-12 Tires on 4.25 Wide Wheels
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Q&A: Trailer Plug is a 4-Way Flat But there are 6 Wires
- Q&A: 4-Way Connector Needed to Replace 4-Way on Trailer with 6 Wires