Replacement Trailer Fenders That Are 42-1/2 Inches Long

Question

Question:

I have a shorelander trailer need a white fender measures 42-1/2 across bottom I can send you a picture

asked by: Bob K

1

Helpful Expert Reply:

I did get the photos and we do have trailer fenders that are 42-1/2 inches across, or more specifically, 42-5/8 inches, the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2.

The important measurement is also the 30-1/4 inches between the mounting bracket slots, which you'll also need to measure, as you can see in the cut out I added with the dimensions of the fenders. They are a fit for trailers with 14 inch wheels, and I have added a link to a video review for you to check out as well.

expert reply by: Kyle S

1

click to enlarge

Answer 1

The most important measurement is the mounting bracket slots and the Fulton Single Axle Trailer Fenders with Top and Side Steps #F008574-2 fit 14 inch wheels and measures 30-1/4 inches from inside to inside for the mounting brackets, which do not…

view full answer...

Answer 2

You will want to base your replacement fender off of the size of your wheel. From the picture that you sent in it looks like you have a 14 inch wheel. For that I recommend going with the Fulton Single Axle Trailer Fender with Top and Side Steps…

view full answer...

Answer 3

Hi Pieter; most of the time customers just drill or modify the fenders to attach their marker lights. The #F008574 you were looking at has several customer pictures where they added cutouts for the lights to fit. This is technically designed for…

view full answer...

Answer 4

I sure can! Based on the picture you provided the correct replacement fender for your trailer is going to be the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15" #PF11X35W which will work perfectly with the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Trailer Fenders That Are 42-1/2 Inches Long

Featured Help Information

Miscellaneous Media

Continue Researching