Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Tow Bar Wiring

• Parts Needed to Flat Tow a 2011 Nissan Versa
  A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...
• Parts Needed to Flat Tow 2016 Cadillac Escalade
  Along with the Blue Ox Base Plate Kit # BX1716 and the Blue Ox Alpha 2 Tow Bar # BX7380 there are a couple more parts you need in order to safely flat tow your 2016 Cadillac Escalade. Since the Alpha comes with safety chains we can check that off the list but you will also need a wiring kit in order to activate your Escalade's brake lights and turn signals. For that the best option is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, or you can simply add magnetic...
  view full answer...
• What Wiring Components do You Recommend for Towing with My 2017 Porsche Mecan?
  If you are just looking to mount accessories like a bike rack or cargo carrier on a hitch receiver installed on your 2017 Porsche Mecan, you do not need any additional wiring unless you are planning to install a tail light kit like the Peterson Magnetic Tow Lights- 4-Way Flat Connector # PE26UR. If you are planning to use this type of tail light kit or are planning to tow a light utility trailer, you will need the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector...
  view full answer...
• Recommended Flat Towing Equipment For A 1994 Geo Tracker
  The Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms Item # 118-1 is a confirmed fitting base plate for your 1994 Geo Tracker and to attach it to your Reese tow bar you'll need the Roadmaster Tow Bar Adapter # RM-025. To flat tow you'll also need a braking system, tow bar wiring, and safety cables. I have the following recommendations for you below: Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524. This system provides intense,...
  view full answer...
• Magnetic Towing Lights With 4-Way to Replace Damaged Set
  We do carry magnetic towing lights that connect with a 4-way like the ones that were damaged with the lost cap, but no replacement lenses. So, the best option is going to replace yours with a similar set from Optronics or Tow Ready. - Optronics Magnetic Tow Lights # TL21RK - Tow Ready Magnetic Tow Lights # PE26UR I have added links below to video reviews of both options for you to take a look at.
  view full answer...
• Will Custer Peterson Tow Light Kit # PE26UR Fit Trunk of 1996 Toyota Camry
  The Peterson Mount Tow Light Kit # PE26UR that you referenced is a universal-fit product designed to fit the broadest possible range of vehicles. It securely attaches to any metal surface with strong magnets. Its ideal installation location will vary among vehicle styles. It can be placed anywhere where it can be seen, and the manufacturer does not necessarily fit-test on all makes and models of vehicles. For reference I have linked you to a helpful article that covers the essentials...
  view full answer...
• Recommended Secondary Light System for use When Using Bike Rack with Cover
  I have a solution for you, but there isn't a directly compatible or solution designed specifically for the Thule EasyFold XT # TH903202. However, you could definitely use something like the Peterson Magnetic Tow Lights - 4-Way Flat Connector - 20' Long Harness # PE26UR if you've got a 4 way wiring harness on the back of your 2020 Mercedes-Benz GLE. These are magnetic towing lights that could be attached to the carrier or your vehicle to provide stop, turn, and tail light functions. If...
  view full answer...
• Parts Needed to Flat Tow a 2014 Chevy Silverado 1500
  A complete flat towing setup consists of base plates, a compatible tow bar, safety cables, tow bar wiring, supplemental braking and, when needed, a high/low adapter. You'll also want to consult the vehicle's owners' manual for any specific instructions to follow to get your vehicle prepared for flat towing. For base plates I recommend using the Demco Classic Base Plate Kit - Fixed Arms # DM9518200, which will give you a durable base plate with a heavy duty powder coating at a nice price...
  view full answer...
• What Components For a Flat-Tow Setup Can Be Transferred Between Vehicles
  In regards to a flat-tow setup, the base plates are the only vehicle specific component. Therefore, you can switch the wiring, tow bar, safety cables, and braking system between the two vehicles. That said, you'd want to make sure you're using a portable systems like the Blue Ox Patriot Portable Braking System part # BLU37TR and Magnetic Tow Lights part # PE26UR.
  view full answer...
• Will Peterson Tow Light Kit Fit At Top Of Rear Hatch On 2015 Subaru Outback Being Towed
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR should work well for you. The TPeterson lights should securely attach to the top of your car with the strong magnets. This would put the lights above the bikes you are carrying as you want.
  view full answer...
• Recommended Removable Flat Tow Light Kit For 2016 Jeep Wrangler Soft Top
  I may have another option, but we do not carry the Custer Ez Mount EZT20B that use a mounting flap. We have had customers use the Peterson Magnetic Tow Lights # PE26UR on their Jeeps by attaching the magnet to the body right next to the tail light housings. I included a picture of the lights used this way on a Jeep Wrangler for you to take a look at. This would be a great removeable option for your 2016 Jeep Wrangler with a soft top as it would still allow you to easily remove the lights...
  view full answer...
  
• Dinghy Tow Wiring for 2018 Chevy Silverado 1500
  It sounds like you need wiring to flat tow your 2018 Chevy Silverado 1500 and for that you need the Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247 as there is no straight plug-in harness available. Please keep in mind that you will also need to disconnect your Silverado's battery when towing and the Roadmaster Automatic Battery Disconnect # RM-766 is highly recommended to make this process easier. I've added links to video reviews and installs of both products for...
  view full answer...
• Can Magnetic Tow Lights Be Placed On The Cab Of A 2019 Chevy Colorado When Flat Towing
  Yes, as long as the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR are visible to other drivers behind you then you can place them at the rear-most position of the cab of your 2019 Chevy Colorado.
  view full answer...
• Can 2014 Kia Soul with a Manual Transmission Be Flat Towed
  I did some checking and your 2014 Kia Soul with a manual transmission can be flat towed. Your Roadmaster tow bar can be used but you will need a new base plate kit as they are all custom fit for specific vehicles. For a base plate kit you'd need the # RM-522114-4. Aside from that most of the flat towing components from your old vehicle can swap to the Soul but it really depends on what you have. If it's a universal lighting system like the part # RM-2120, that will easily fit the Soul....
  view full answer...
• Lighting Options for Towing 2015 Honda Civic Si Behind Motorhome
  Neither Roadmaster nor Blue Ox offer a base plate kit for the 2015 Civic. Both companies tell me that the vehicle isn't flat towable, in which case you'd want to use a tow dolly like part # RM-2050-1. The tow dolly has taillights on it, for extra visibility the # RM-2120 tow lamp kit would work well for you.
  view full answer...
• Can Kia Soul with Manual Transmission be Flat Towed
  Some model years of the Kia Soul with manual transmission can be safely flat towed with 4 wheels down, but you will want to check your owner's manual to confirm that your particular model year is capable of being flat towed. This should appear in your manual under the heading "recreational towing". This section of your manual will tell you if there are any required preparation steps to ready your Soul for flat towing. Safe and legal flat towing requires a number of components: tow bar,...
  view full answer...
• Flat Tow Lighting Recommendation that Uses LED Style Bulbs
  The Peterson Tow Light Kit # PE26UR has LEDs and installs magnetically to a metal portion of your towed vehicle.
  view full answer...
• Parts Needed to Tow 2013 Ford C-Max with 2001 Ford F-250
  In order to tow your 2013 Ford C-Max behind your 2001 Ford F-250 you'll need a tow bar, base plates, safety cables and magnetic tail light kit. To start, I recommend that you use the Roadmaster StowMaster Tow Bar - Car Mount - 2" Ball - 6,000 lbs # RM-501 and the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 524432-1, which will work well together and provide you with the base parts needed to tow your C-Max. You'll also need a set of safety cables like the # RM-643 and some...
  view full answer...
• Will Stay-IN-Play DUO Braking System Work With 2008 Saturn Aura XR
  Yes, the SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 will work with your 2008 Saturn Aura. Along with a supplemental braking system there are a number of other parts required to flat tow your vehicle, and I'll list the recommended products for you. - Base Plate Kit: Roadmaster EZ Base Plate Kit # 523145-1 - Tow Bar: Roadmaster Falcon All Terrain Tow Bar # RM-522 - Safety Chains: RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643 - Wiring Kit: Magnetic Tow Lights...
  view full answer...
• Flat Towing a 2012 Ford Fusion, Parts Recommendation
  The manual transmission 2012 Ford Fusion is a very popular vehicle that can be flat towed without having to install any lube pumps for the transmission or axle disconnects. You will want to start with a base plate kit first. For that you would want the Roadmaster Base Plate kit part # 4420-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon...
  view full answer...
• How Do the Peterson Magnetic Tow Lights Ground
  The Magnetic Tow Lights part # PE26UR ground through the trailer connector and to the vehicle, not through the magnetic base of the light.
  view full answer...
• Recommended Items Needed For Flat-Towing A 2014 Ford F-150
  You can use the Falcon 2, part # RM-520 to tow your F-150. The tow bar has a 6,000 lb limit so you will be within the capacity. If you do not have the base plates you can check out the attached link to our product page for the base plates we offer for your truck. If you do not have EcoBoost on your truck you can use part # 495-1A. If you do have EcoBoost on your truck the base plates that will work are part # RM-524431-5. Since you have already been flat-towing you probably have the...
  view full answer...
• Are Additional Lights Required on Towed Vehicle When Using a Tow Dolly
  Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional lights just to make it easier to see the vehicle that's on the dolly. If you wish to add lights, you'll need to splice in a tow light kit, like # PE26UR, because the trailer connector on the back of your RV will already be in use with the dolly. Unless...
  view full answer...
• Magnet Strength Of Peterson Tow Bar Wiring 18148 Lights
  The Peterson Magnetic Tow Lights - 4-Way Flat Connectors # PE26UR have a strong magnet. They don't have any weight rating or capacity rating. They have been tested at highway speeds with various weather conditions to stay firmly in place on your towed vehicle's exterior. You can remove them by hand, and they take a little strength to remove, but you do have to be purposeful for them to come loose. I've attached an article on these style magnetic lights to assist.
  view full answer...

Do you have a question about this Tow Bar Wiring?