Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These lights get turn and brake signals on your towed car without splicing into its wiring, eliminating the risk of damage from electrical feedback. They mount inside your vehicle's tail light housing, with the wiring out of sight.
Features:
Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Blue Ox Tail Light Wiring Kit. This wiring kit allows you to get the signal lights needed for flat towing without tapping into your towed vehicle's electrical system. It provides brake signal, running, and signal lights, and it runs beneath the vehicle completely and connects to your RV so it bypasses the towed vehicle's electrical system all the way. The bulbs and sockets are going to mount inside your vehicle's tail lights. To get these mounted in the tail lights you will need to use a 1" diameter hole saw, that's indicated in the included instructions. It does come with detailed installation instructions to help walk you through the entire process step-by-step. Everything here on the table is what you're going to get.
You're going to get two lights, two sockets, you're going to get your bundle of wiring, this is your main wiring harness. It's going to measure around 26' long. You're going to get a couple extra extension wires for the installation back at the tail light assemblies. You're going to get your ground screws, your butt connectors, and you're going to get your ring terminals. The product's also fully made in the USA, and again, it does come with detailed installation instructions to help walk you through that entire process step-by-step. These bulbs are going to sit in a really nice, it's like a J-socket ...
So you can push those down and release them as needed. It's going to use bulb number 2357. That's going to do it for today's look at the Blue Ox Tail Light Wiring Kit.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Robert C.
12/14/2020
Easy Install Light Kit!
Steve
3/24/2016
Working great. Definitely the easiest way to wire a tow vehicle.
Bobzilla
4/12/2020
Still working great
Ronnie H.
10/22/2017
Still works great, replaced bulbs with LEDs. Much better
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
11/2/2022
The wiring harness was great. Directions were very good and installation was fairly easy with few CNN if any real problems.