Part Needed to Connect Roadmaster Tow Bar to 2023 Ford Bronco Badland

Updated 12/03/2025 | Published 11/29/2025

Products Featured in This Question

Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick

(629)

$189.28

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3507)

$165.27

Curt RVibrake 4 Portable Flat Tow Brake System - Wireless Monitor - Proportional

(56)

$1595.95

Question:

Hello, My 2023 Ford Bronco Badlands edition came with tow connectors on the front bumper that look like I could connect to my Roadmaster tow system on my Class A RV. I wanted to confirm that it is designed to do this or do I need to purchase different connectors? At a minimum, I want to get the wiring recommendations from you as well for brakes and turn signals.

asked by: Sean B

Expert Reply:

Hey Sean, since we know the 2023 Ford Bronco Badlands has D-rings that are 1 inch thick and that you also have a Roadmaster tow bar the correct base plate kit solution is the Roadmaster part # RM65FR.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Curt RVi Series 4 Portable Flat Tow Brake System # RVI44FR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

expert reply by: Jameson C

Sean B.

12/2/2025

Thanks for getting back to me. I'm good on the wiring details now but I'm still unclear on the tow hooks. Here are the upgraded tow hooks from Ford that I can't find any details on the amount of weight that they can support. Can I keep these or do I need to replace them with a baseplate? I. Getting mixed information on if they are capable or not to flat tow. https://performanceparts.ford.com/part/M-18954-BB Thanks, Sean

Jameson C.

12/3/2025

@SeanB I don't see why those couldn't be used but you'd have to check with a Ford dealer to see if they are rated for flat towing. I'd also measure the width and the diameter of the hole too.